|
Yokogawa offers a variety of passive probes including: probes designed for probing small areas (PCBs, ICs, etc.),
and for measuring high voltage levels. Yokogawa also offers a FET probe which has minimal input capacitance for
making accurate, measurements on fast signals.
|
 |
For the DL7100/DL7200 SignalExplorers
Bandwidth: DC to 400MHz (-3dB, 1/10)
Attenuation ratio: 1/1 or 1/10
Maximum input voltage: 600V (DC + ACpeak)
Cable length: 1.5m |
|
 |
 |
700960 200 MHz Passive Probe |
For the DL1600 series
Bandwidth: DC to 200MHz (-3dB, 1/10)
Attenuation ratio: 1/1 or 1/10
Maximum input voltage: 600V (DC + ACpeak)
Cable length: 1.5m |
|
 |
|
701940 10 MHz Passive Probe |
For the DL750 701255 module
Bandwidth: DC to 10MHz (-3dB, 1/10)
Attenuation ratio: 1/1 or 1/10
Maximum input voltage: 600V (DC + ACpeak, nonisolated input)
Cable length: 1.5m
Standard accessories include: ground lead, pinchers tip, IC test
tip, ground attachment, marker tip |
|
 |
|
700929 10:1 Probe |
For the DL750 isolation modules
Bandwidth: DC to 100MHz (-3dB)
Attenuation ratio: 1/10 (Fixed)
Maximum input voltage: 1,000V (DC + ACpeak, probe itself)
Cable length: 1.5m |
|
 |
|
701941 Miniature Passive Probe |
For DL1700E and DL7400 series
Bandwidth: DC to 500MHz (-3dB)
Attenuation ratio: 1/10 (Fixed)
Maximum input voltage: 400Vrms
Cable length: 1.2m |
|
 |
|
701942 Miniature Passive Probe |
For DL1600, DL1700E, DL7400 and DL9000 series
Bandwidth: DC to 350MHz (-3dB)
Attenuation ratio: 1/10 (Fixed)
Maximum input voltage: 400Vrms
Cable length: 3m |
|
 |
|
701944 100:1 Probe |
For DL1600, DL1700E, DL7400 and DL9000 series
Bandwidth: DC to 400MHz (-3dB)
Attenuation ratio: 1/100 (Fixed)
Maximum input voltage: 1,000Vrms, 6,000Vpeak
Cable length: 1.2m |
|
 |
|
701945 100:1 Probe |
For DL1600, DL1700E, DL7400 and DL9000 series
Bandwidth: DC to 250MHz (-3dB)
Attenuation ratio: 1/100 (Fixed)
Maximum input voltage: 1,000Vrms, 6,000Vpeak
Cable length: 3m |
|
 |
|
B9852CR Mini clip converter |
A clip set designed for the 700988, 700960 and 701940 probes. |
|
 |
|
B9852HF Basic accessories set for the 701941 probe |
11 accessories have been included in this set (See below
*).
* The B9852HF
contains the following eleven(11) kinds of accessories.
(Insulation cap, IC cap, BNC adapter, Rigid tip, Spring tip (Ø:
0.80 mm), Spring tip (Ø: 0.38 mm), Ground spring, Adjustment tool,
Pincher tip, Standard ground lead, Color coding rings) |
|
 |
|
PBL5000 5 GHz low capacitance probe |
This 10:1 and 20:1 selectable passive probe is used with the 50 ohm
input setting on the DL9000. The change in attenuation is realized
by changing resistance on the tip of the probe.
Bandwidth: DC to 5 GHz (-3 dB)
Attenuation: 10:1 or 20:1 (±2%)
Input resistance: 450 Ω or 950 Ω (±1%)
Input capacitance: approx 0.25 pF (typ. 450 Ω), 0.4 pF
(typ. 950 Ω)
Max. input voltage: 20 Vrms |
|
|
|
Another probes and Accessories |
|
|
|
| · |
Probes for Digital Oscilloscopes |
|
|
|
|
DL Series Selection Guide
Find the right one for you! |
Serial Bus Analyzer Selection Guide
For I2C, CAN, and SPI analysis |
Probes for Digital Oscilloscopes
Supporting a variety of measurement |
Accessories for DL series
Accessories other than probes |
|
|
|
|
|
