| Parameter |
Product specification | Remarks |
|---|
| Wavelength varying range 1440 to 1640 nm |
| |
| Wavelength resolution |
1 pm | |
| Absolute wavelength accuracy |
≤±100 pm | 1 |
| Relative wavelength accuracy |
≤±50 pm | 1 |
| Wavelength stability |
±5 pm/h | 2, 4, 5 |
| Spectral line width |
NARROW |
≤1 MHz | 2, 4, 8 |
| WIDE |
≥50 MHz | 1, 2, 4, 8 |
| Optical output |
Maximum output wavelength |
≥±7 dBm | 1, 10 |
| 1520 to 1610 nm |
≥±5 dBm |
| Total wavelength range |
≥-8 dBm |
| Optical output stability |
5 minutes |
≤±0.01 dB | 1, 3, 5, 6, 10 |
| 1 hour |
≤±0.05 dB |
| 24 hours |
≤±0.1 dB |
| Optical output repeatability |
≤±0.04 dB | 1, 3, 5, 6, 10 |
| Monitor output |
Maximum optical output |
≤±5 dBm | 9 |
| Minimum optical output |
≥-25 dBm |
| Accept optical fiber |
SM (ITU-T G.652) | |
| Accepted optical connector |
FC/Angled PC | 7 |
Laser safety information
- This laser light source is catego-rized as an IEC60825-1:2001 Class 1 M product.
- This product complies with 21CFR1040.10, except forexemptions resulting from
itscompliance with Laser Notice No.50, dated May 27, 2001.
- Viewing laser output at a distance of 100 mm or less using someoptical
measuring devices (loupes, magnifying glasses, tele-scopes, etc.) may result
in eye injury.
Unless otherwise noted, the specifications represent values obtained after
calibration performed at least one hour OPTON, under reference operatingconditions
* with 2 m SMF output point.
* Reference operating conditions: Ambient temperature
of 23±2ºC, temperature change rates of 1ºC per 10 minutes and
3ºC per hour, and humidity of 50±5%
1 At maximum optical output
2 Wavelength: 1590 nm
3 Wide line width
4 Narrow line width
5 Constant temperature
6 Wavelength: 1460 to 1620 nm
7 SEIKOH GIKEN Angled/PC or conforming product (step type)
8 At minimum optical output
9 Using MONITOR connector
10 Using OUTPUT connector
|
