This light source option can be used for measuring losses. It can also be used for optical fiber identification, because it is capable of outputting not only continuous wave (CW) light but also a 270-Hz modulated light.

* The stabilized light source option cannot be used for the 735040.

This option can be used for identifying the multicore fiber cable and visually checking for a failure. The adopting the connector connection method enables the visible light to reach greater distances with less light leakage.

* The visible light source option cannot be used for the 735037 and 735040.

You can use the dummy fiber to effectively detect abnormal near-end connection loss.

* The dummy fiber option cannot be used for the 735040.
* The built-in dummy fiber is not attachable and removable.

This is useful for simply checking optical power when performing link loss testing or troubleshooting.

You can connect an optical fiber with an angled-PC connector directly to the OTDR. The angled PC is often used for CATV networks to reduce the influence of reflection.

External battery attached to the the OTDR extends the battery operation time up to 18 hours, which is three times the standard battery operation.

Measured results can be printed on site. It makes it easy to attach the printed sheet to your report. Remote control and FTP (file transfer) via LAN is also possible.

Product Home

Specifications

Features

Software