The SB5710/SB5310 represents our constant pursuit of "more analysis functions that are easier-to-use." All in-vehicle serial bus analysis functions can be intuitively accessed and operated by following a menu displayed with the "SERIAL BUS SETUP" key. Furthermore, using the Auto setup function dedicated for serial buses, you can have the instrument automatically enter settings for record length, time axis (T/div), triggers, and analysis by simply specifying bus type and source (input) channel. After that, it will automatically display bus waveforms and analysis results (list and decoding). This frees you from tedious analysis setup.
Figure.23 Serial bus auto setup function

The SB5710/SB5310 can simultaneously measure and analyze logic signals of up to 32-bits (available as 32-bit or 8-bit models). It is effective for ECU debugging because simultaneous measurement and analysis applies not only to in-vehicle serial buses (measured on analog channels), but also to parallel bus signals. The SB5710/SB5310 also supports the state display and bus display functions that is standard on logic analyzers. The fast screen update rate is maintained even when measuring analog and logic signals at the same time. Measuring logic signals requires the model 701980 or 701981 logic probe (sold separately).

Product Home

Specifications

Features