Vehicle Serial Bus Analyzer SB5000

	Home / Our Businesses / Test & Measurement / Products / Digital Oscilloscopes /
	Vehicle Serial Bus Analyzer SB5000

Product Home

Features

· Other Features

Other Features

1 2 3

Making It Easier

Logic Signal (Parallel Bus) Measurement and Analysis

Save Only the Data You Need & Extract Only the Abnormal Waveforms

Versatile Connectivity

Versatile Connectivity

Probe power
(Factory-set option)
GO/NO-GO I/O
Can be used to output the results of either GO/NO-GO tests or mask tests for communication purposes as a TTL level signal.
USB-PC connection port
Can be used to control SB5710/SB5310 externally or to upload data from the SB5710/SB5310 to a PC.
Video OUT
Can be connected to an external monitor.
Trigger I/O
Separate ports available for external trigger input and output.
100BaseTX/10BaseT Ethernet
(Factory-set option)
PC Card Slot
A PC card slot is standard. A National Instruments' PCMCIA-GPIB card is required to be able to use the GPIB interface.
Logic Inputs
Logic probe connectors. One or Four 8-bit logic probes can be connected. (701980 or 701981)