Install the WE7000 Control Software which comes standard with the measuring station) onto your PC, then use the software to control the measuring station and carry out a wide variety of measurements.

The table below lists the system requirements for this software. Make sure that the PC's specifications, peripherals and I/O slots are suitable for the WE7000.

OS/Machine	Windows 95/98/Me, NT 4.0, 2000 or XP (DOS/V)
I/O slot	One slot for a half size PCI card is required when using the optical interface card WE7035 or WE7036.
CPU	Pentium II 400 MHz or faster
Memory	128 MB or more
Available hard drive space	20 MB or more
I/O address (when using the optical interface card)	I/O port address, occupying an area of 3 words
IRQ settings(when using the optical interface card)	Using one IRQ number
Miscellaneous	CD-ROM drive for installation

The system requirements listed above are for a measuring station installed with two modules. Please be aware that the requirements for CPU and memory differ depending on the number and type of modules, and the sampling frequency.

The system requirements for other software are about the same as listed above. However, A PC with even higher performance is recommended when saving a large quantity of data in real time or when carrying out complex computations. To ensure stable operations, please use the Windows NT 4.0 or Windows 2000.