Applicable Power Meter:
- WT1600 firmware version 1.05 or later for GP-IB/serial (RS-232)
- WT1600 firmware version 2.01 or later for GP-IB/serial (RS-232)/Ethernet
- WT3000 firmware version 2.01 or later for GP-IB/serial (RS-232)/Ethernet/USB
| Functions |
| Measuring Mode |
Power measurement, integration, and harmonic measurement |
| Types of Files |
Waveform files (1002 points, peak to peak comression data), computation files, harmonic files, and setup files |
| Screen Viewer |
Numeric view, waveform view, trend view, vectorial view, and bar-graph view |
| Data Acquisition Interval |
50 ms at max. speed (WT1600)
In Fast mode, using GP-IB.
Depends on your PC's performance.
* When the data update rate is set to one second or slower, captured and saved data can be synchronized. |
| System Requirements |
| Personal Computer |
CPU |
Celeron 500 MHz or higher is recommended |
| Memory |
128 MB or greater is recommended |
| VRAM |
4 MB minimum |
| Hard Disk |
Free space of at least 100 MB |
| OS |
Windows 98, Windows Me, Windows NT, or Windows 2000 (English version) |
| Display Resolution |
800×600 pixels or higher |
| Communications Port |
Ethernet: Transmission method 10Base-T |
| RS-232: COM port of the PC should be available |
| GP-IB: AT-GPIB/TNT (PnP) or later, with driver NI-488.2M version 1.60 or later, from National Instruments |
|
