Harmonic/Flicker Measurement Softwa for WT3000/WT2000/WT1600

	Home / Our Businesses / Test & Measurement / Products / Power Measuring Instruments /
	Utility Software for Use with WT3000/WT2000/WT1600 761922 Harmonic/Flicker Measurement Software

Product Home

Specifications

· Features

Functions

Features

1 2 3 4

Software Enabling Measurement Complying with Harmonics Standard	Automatic Report Generation	Entering Settings on the WT3000/WT2000/WT1600 from Your PC
Converting Data to CSV Format	Voltage Ffluctuation and Flicker Measurement	System Construction

Enables PASS/FAIL evaluations of harmonic measurement results in line with standard class divisions (A, B, C, D). Displays lists of measurement values, as well as bar graphs that let you compare the measured value and standard limit value for each harmonic component. Can also display time-series current variation graphs, and color-coded graphs indicating PASS/FAIL for each harmonic order at the present time.

Software Enabling Measurement Complying with Harmonics Standard

Harmonic Current Measurement Value List

Displays harmonic measurement data as a single list.

Harmonic Current Variation Graph

Displays a graph showing the changes in harmonic current data over time. Up to 6 current components can be displayed between the 1st and 40th order.

Harmonic Current Bar Graph

Evaluates whether harmonic data is within the standard limit value, and displays the result as a bar graph. The display of evaluation results is color-coded, in colors such as red and blue. ²

Measurement Value Judgement Graph

Measures the harmonic current over the set observation time, and evaluates it in conformance with the standard. Evaluation results are displayed as PASS or FAIL. ²

Waveform Observation

Lets you display voltage or current signal waveforms, and measure frequencies and peak values. Moving the cursor lets you display values for the displayed waveform.

2: Evaluations conforming to the IEC61000-3-2 Ed2.2 standard are supported by WT3000 and WT2000. Evaluations are also possible using WT1600, but there are some restrictions.

Automatic Report Generation

You can print harmonic measurement results as value lists and graphs, and save image data. Titles and comments can be entered in reports, letting you enter information such as measurement dates/times, device names or control numbers.