Power Measuring Instruments

	Home / Our Businesses / Test & Measurement / Products / Power Measuring Instruments /
	751550/751552/751521/751523/751574 Accessories for Power Meters and Digital Multimeters

Product Home

Specifications

· Features

FAQ

Features

1 2 3 4 5

751521/751523 Current Sensor Units	751574 Current Transducer	96001/751552 Current Clamp-on Probe
WT2000 Series	PZ4000	Example Characteristics of Clamp-on Probes

Special AC-Input Clamp-on Probes for Large-current Hot Line Measurement

96001/751552 Current Clamp-on Probe

Current clamp-on probe accessories for digital power meters, power analyzers, and digital multimeters
AC 400 Arms (600 A peak) / AC 1000 Arms (1400 A peak)

Yokogawa's current clamp-on probes can be used for current power measurements on large-current equipment in excess of a power meter's rated range. The clamp-on design makes it possible to take measurements in tight spots, and to take measurements with live wires in already-installed equipment. Two models are available: 96001, which covers a wide frequency range; and 751552, which can be used for high-precision measurements. Model 96001 provides voltage output, so it can be used with waveform measuring instruments and digital

Voltage output

96001

Features
-	Wide dynamic range: 0 Arms to 400 Arms (AC); Max. 600 Apk (AC)
-	Wide measurement frequency range: 20 Hz to 20 kHz (±5%)
-	Basic accuracy: ±1.0% of rdg ±0.2 mV
-	Voltage output model: 10 mV/A
-	Since this model is a voltage output type, you can use it for an oscilloscope.
* 96001 is a Yokogawa M&C product. 751550 is a model code only for Japan.

751552

Features
-	Wide dynamic range: 0.001 Arms to 1000 Arms (AC): Max. 1400 Apk (AC)
-	Wide measurement frequency range: 30 Hz to 5 kHz (±2%)
-	Highly-precise basic accuracy: ±0.3% of rdg
-	Phase error: 0.7 deg (50/60 Hz)
-	Current output model: 1 mA/A

Example Characteristics of Clamp-on Probes

Accessories for Clamp-on Probes


758917 Measurement leads Two leads in a set. Use 758917 in combination with 758922 or 758929. Total length: 75 cm Rating: 1000 V, 32 A	758922 Small alligator adapters For connection to measurement leads (758917). Two in a set. Rating: 300 V	758929 Large alligator adapters For connection to measurement leads (758917). Two in a set. Rating: 1000 V
		¹
758923 Safety terminal adapter set (spring-hold type) Two adapters in a set.	758931 Safety terminal adapter set Screw-fastened adapters. Two adapters in a set. 1.5 mm Allen wrench included for tightening.	758921 Fork terminal adapter Two adapters (red and black) to a set. Used when attaching banana plug to binding post.

366921 ^1,2 Conversion adapter For conversion between BNC and female banana plug	758924 Conversion adapter For conversion between BNC and female banana plug

Due to the nature of this product, it is possible to touch its metal parts.
Therefore, there is a risk of electric shock, so the product must be used with caution.
Use with low-voltage currents (42 V DC or less)

1: These accessories do not conform to CE Marking.
2: Use these products with low-voltage circuits (42 V or less).