|
Introduction
Yokogawa Technical Services offers a hire service that provides pre-configured
instrumentation for a ‘plug & play’ solution.The wide range of equipment available
covers everything from paper recorders, through analytical equipment, to BRAIN
and HART terminals. It is possible for users to hire on a short-term basis while
equipment is being repaired, and telephone support is provided at no extra cost.
All equipment is available on short notice with overnight delivery, and can be
hired on a daily, weekly or monthly basis.
Controllers
With discrete controllers running smaller production
areas and dedicated batch plants, a failure can have a
huge impact on production, potentially incurring a
high cost or holding up the next step of an important
process. Yokogawa offers a wide range of controllers
for hire which may be utilised for a short-term control
solution or as direct replacement whilst a failed unit is
repaired.
pH Equipment
pH analysers can be pre-configured ‘in-house’ to
enable direct replacement. The customer can then
plug in the hired unit and continue to monitor or
control the plant in as short a time as possible. This
reduces any unforeseen environmental issues or
‘out of spec’ product problems while instruments are
undergoing test or repair.
Conductivity equipment
Conductivity units can be pre-configured before
dispatch to site, reducing installation time and
eliminating problems with initial setup. All units can be
pre-calibrated to cover the desired ranges required by
the customer for their process
Recorder equipment
Yokogawa has a market-leading reputation in
recorders, and offers a wide range of pre-configured
hire units. From the smaller µR1000 range through the
µ1800 up to the larger DR 2400 and DX200, there is a
Yokogawa recorder to suit all applications. The
company can also provide the DAQSTATION
paperless recorder and DC100 data-logging unit at
highly competitive prices.
Communication devices
With the most common forms of intelligent instruments
now being programmable in-situ,Yokogawa offers the
hire of BRAIN and HART communicators on a weekly
basis. These communicators enable technicians
to commission, calibrate and perform on-site range
changes with minimal or no down time.
Calibration equipment
Yokogawa can provide calibration equipment to assist
instrument setup and commissioning. For example,
the Yokogawa CA100 can provide loop or passive
injection, input measurement, mA, mV, V, resistance
and different thermocouple inputs, giving an all-in-one
solution to commissioning and calibration needs.
The unit comes with a traceable calibration certificate
for audit trails.
|
|
|
|
|
|
|
|
