The O2mation, model AV550, averaging oxygen analyzer was designed with a focus on practical performance. In the spirit of the zirconia sensor “remaining life” diagnostic, Yokogawa introduces predictive calibration dates, cell asymmetry alarms and detector validation features.

The EXAxt ZR402 analyzer features the industry's latest technological advances such as, easy-to-read, simple-to-use, LCD touch screen operation; real-time trend graphing of process variables; two user configurable analog outputs; and, three user configurable measurement parameters including oxygen concentration, relative humidity, dew point, and moisture content.

The EXAxt ZR202 transmitter / detector combines benefits of the ZR402 remote analyzer and the ZR22 detector into an intelligent, rebuildable, low-cost measurement device for in-situ flue gas measurement.

The ZR probe's in-situ measurement method does not require any process conditioning or extractive sampling. This reduces maintenance costs and allows faster measurement response to changes in the process.

Yokogawa's Zirconia oxygen detector systems offer a variety of calibration units for quick, easy control of calibration gases giving the user simple, accurate calibration

The IAC-24 is an ultra compact device that mounts directly onto the ZR22G or ZR202G zirconia detector. It is used to calibrate a single detector. The unique mounting configuration is designed to minimize installation time, wire pulls and tubing runs that are typical with auto calibration.

The accumulation of flyash on the zirconia cell affects its ability to measure oxygen concentration. Flyash and its constituents can reduce the life of the zirconia cell and affect the cells response time to changes in gas concentration. Yokogawa’s large surface area sintered metal filters are designed to keep particulate and ash off the measurement cell.