- Home>
- Our Businesses:
- Field Instruments:
- Transmitters:
- EJX Pressure/Differential Pressure Transmitters:
- EJX110A Differential Pressure Transmitter:
- EJX120A Draft Range Differential Pressure Transmitter:
- EJX130A High Static Differential Pressure Transmitter:
- EJX210A Flange Mounted Differential Pressure Transmitter:
- EJX310A Absolute Pressure Transmitter:
- EJX430A Gauge Pressure Transmitter>
- EJX440A High Static Gauge Pressure Transmitter:
- EJX510A/EJX530A Absolute and Gauge Pressure Transmitter:
- EJX118A Diaphragm Sealed Differential Pressure Transmitter:
- EJX438A Diaphragm Sealed Gauge Pressure Transmitter:
- EJX115A Low Flow Transmitter:
- EJX910A Multivariable Transmitter:
- EJX930A Multivariable Transmitter:
- EJXMVTool™ EJX-MV Configuration DTM (FSA120):
- EJX630A/EJX610A Gauge and Absolute Pressure Transmitter:
- EJX438A Diaphragm Sealed Gauge Pressure Transmitter
Multi-sensing, an Evolution in the Silicon Resonant Sensor
EJX438A Diaphragm Sealed Gauge Pressure Transmitter
Product Information
 |
||||||||||||||||||||||||||
| Diaphragm seal is used to prevent process medium form entering directly into the pressure-sensing assembly of the pressure transmitter, it is connected to the transmitter using capillary filled with fill fluid. EJX438A Diaphragm Sealed Gauge Pressure Transmitters can be used to measure liquid, gas, or steam flow, as well as liquid level, density, and pressure. The multi-sensing technology provides the advanced diagnostic function to detect such abnormalities as an impulse line blockage. |
||||||||||||||||||||||||||
| The EJX series is available with BRAIN, HART, and FOUNDATION™ fieldbus communication protocols. | ||||||||||||||||||||||||||
|
||||||||||||||||||||||||||
Specifications
| EJX438A Diaphragm Sealed Gauge Pressure Transmitter | |||||||
| A Capsule | B Capsule (Flush type) |
B Capsule (Extended type) |
|||||
| Range | -0.1 to 3.5 MPa (-14.5 to 500 psi) |
-0.1 to 16 MPa (-14.5 to 2300 psi) |
-0.1 to 7 MPa (-14.5 to 1000 psi) |
||||
| Span | 0.035 to 3.5 MPa (5 to 500 psi) |
0.16 to 16 MPa (23 to 2300 psi) |
0.16 to 7 MPa (23 to 1000 psi) |
||||
| Accuracy | ±0.15% | ±0.15% | ±0.15% | ||||
| Degrees of protection | IP67, NEMA 4X, and JIS C0920 immersion proof | ||||||
| Certificates | FM, CENELEC ATEX, CSA, IECEx | ||||||
| Output | 4 to 20 mA DC or FOUNDATION™ fieldbus, 2-wire system with digital communication | ||||||
| Supply voltage | BRAIN and HART:10.5 to 42 V DC (10.5 to 30 V DC for Intrinsically safe type) Fieldbus:9 to 32 V DC (9 to 24 V DC for Entity and 9 to 17.5 V DC for FISCO) |
||||||
| Ambient temperature | -40 to 60 deg C (-40 to 140 deg F) (general use type) -30 to 60 deg C (-22 to 140 deg F) (with integral indicator) It must be within the fill fluid operating temperature range. |
||||||
| Process temperature | -50 to 310 deg C (-58 to 590 deg F) It must be within the fill fluid operating temperature range. |
||||||
| Maximum working pressure | Max. measurement valve The working pressure must be with in the flange rating. |
||||||
| Mounting | Transmitter: 2-inch pipe mounting Diaphragm seals: flange mounting |
||||||
| Process flange size |
|
||||||
| Diaphragm material | SUS316L, Hastelloy C-276, Tantalum, Titanium | ||||||
| Process flange material | S25C, SUS304, SUS316 | ||||||
| Housing | Cast aluminum alloy or ASTM CF-8M stainless steel (optional) | ||||||
Viewing pdf files requires Adobe Reader
