- Home>
- Our Businesses:
- Field Instruments:
- Valve Positioners & Converter:
- YVP110 Advanced Valve Positioner :
- VP200 Current-to-Pneumatic Valve Positioner :
- PK200 Current-to-Pneumatic Converter :
- ValveNavi™ (YVP20S) YVP Management Software>
- VP200 Current-to-Pneumatic Valve Positioner
VP200 Current-to-Pneumatic Valve Positioner
The VP200 current-to-pneumatic valve positioner converts a 4 to 20mA DC or 10-50mA DC signal to a pneumatic signal for control valve actuation.
Product Information
| The VP200 current-to-pneumatic positioner receives control signals from electronic controllers or a DCS and converts these to pneumatic signals. It is a dedicated positioner for control valves that actuates pneumatic type control valves, as well as gives feedback on the valve stem position. | ||||||||
|
Features
| - | Applicable to a wide range of control valves |
| Best choice for single acting diaphragms and single/double acting cylinders | |
| - | Energy saving design for improved economy |
| Max. air consumption: 5 Nl/min when air supply pressure is 140 kPa Max. output air capacity: 160 Nl/min when air supply pressure is 140 kPa | |
| - | Excellent maintenance access through a single side panel |
Specifications
| Applicable control valve | Diaphragm actuator: direct output Single acting cylinder: direct output Double acting cylinder |
| Linearity | ±1.0 % (for diaphragm actuator, single acting cylinder) ±1.5 % (for double acting cylinder) |
| Hysteresis | Less than 1.0 % (for diaphragm actuator, single acting cylinder) Less than 1.5 % (for double acting cylinder) |
| Input signals | 4 to 20 mA DC or 10 to 50 mA DC |
| Air supply pressure | 140 to 400kPa (diaphragm, single acting cylinder) 200 to 700kPa (double acting cylinder) |
| Maximum air consumption | 5 Nl/min (diaphragm, single acting cylinder) 12.3 Nl/min (double acting cylinder) |
| Maximum output capacity | 160 Nl/min (diaphragm, single acting cylinder) 330 Nl/min (double acting cylinder) |
| Ambient temperature | -10 to 80 deg C or -30 to 40 deg C |
| Mounting | Front of actuator with bracket or valve yoke |
| Weight | 3.2 kg |
