Verabar Pitot Tubes

 Verabar Pitot Tubes V100 & v110

This is our most economical sensor and is mounted through a simple tube fitting. The V110 includes support on the opposite wall of the pipe.

NOTE: The picture shown is a standard verabar mounted in a pipe wiht EJX pressure Transmitter.

All items sold separately.

 General Specifications
 Verabar Brochure
 RFQ Form
 Verabar w/EJX910

 Verabar Pitot Tubes V150

This advanced, patented design ensures the sensor remains sealed, locked and preloaded to the opposite wall regardless of changes in pipe dimameter due to pressure, temperature or mechanical force.

NOTE: The picture shown is a standard verabar mounted in a pipe wiht EJX pressure Transmitter.

All items sold separately.

 General Specifications
 Verabar Brochure
 RFQ Form
 Verabar w/EJX910

 Verabar Pitot Tubes V200

This sensor can be inserted and removed under pressure. It has threaded components and is available in single rod and double rod units.

NOTE: The picture shown is a standard verabar mounted in a pipe wiht EJX pressure Transmitter.

All items sold separately.

 General Specifications
 Verabar Brochure
 RFQ Form
 Verabar w/EJX910

 Verabar Pitot Tubes V250

This threaded, hand insertion and retraction model (no threaded rods) is for low-pressure applications and can be installed without system shutdown.

NOTE: The picture shown is a standard verabar mounted in a pipe wiht EJX pressure Transmitter.

All items sold separately.

 General Specifications
 Verabar Brochure
 RFQ Form
 Verabar w/EJX910

 Verabar Pitot Tubes V400 and V400D

This sensor can be inserted and removed under pressure. It has been flanged components and is available in single or double rod units. Also in the model V400D, the sensor is similar to the V400 sensor but is designed for larger pipe sizes and higher velocities.

NOTE: The picture shown is a standard verabar mounted in a pipe wiht EJX pressure Transmitter.

All items sold separately.

 General Specifications-V400
 General Specifications-V400D
 Verabar Brochure
 RFQ Form
 Verabar w/EJX910

 Verabar Pitot Tubes V450

This flanged, hand insertion and retraction model (no threaded rods) is for low-pressure applications and can be installed without system shutdown.

NOTE: The picture shown is a standard verabar mounted in a pipe wiht EJX pressure Transmitter.

All items sold separately.

 General Specifications
 Verabar Brochure
 RFQ Form
 Verabar w/EJX910

 Verabar Pitot Tubes V500 and V510

This model is used when flanged components are required. Available in flanged rating up to 2500# ANSI. The V510 model includes opposite side support. Also the extended model is designed for larger pipe sizes and higher velocities.

NOTE: The picture shown is a standard verabar mounted in a pipe wiht EJX pressure Transmitter.

All items sold separately.

 General Specifications-V500
 General Specifications-V510
 Verabar Brochure
 RFQ Form
 Verabar w/EJX910

 Verabar Pitot Tubes V550

This flanged model ensures that the sensor remains sealed, locked and pre-loaded to the opposite wall, regardless of changes in pipe diameter due to pressure, temperature or mechanical force.

NOTE: The picture shown is a standard verabar mounted in a pipe wiht EJX pressure Transmitter.

All items sold separately.

 General Specifications
 Verabar Brochure
 RFQ Form
 Verabar w/EJX910