North & Central America US   
Is it possible to connect competitor's sensors with Yokogawa analyzers? If yes, what are the conditions?

Is it possible to connect competitor's sensors with Yokogawa analyzers? If yes, what are the conditions?

All Yokogawa analyzers use an open architecture with adjustable temperature compensation, adjustable isopotential point, and adjustable slope. They are compatible with all direct pH, ORP, and conductivity sensors.

There are two exceptions to this:

  1. Competitor digital SMART sensors will not work with Yokogawa analyzers. If the sensor has a built-in amplifier, it cannot be connected to a Yokogawa analyzer.
  2. Yokogawa inductive conductivity sensors must be used with Yokogawa analyzers and vice versa. A competitor inductive conductivity sensor cannot be used with a Yokogawa analyzer.

When connecting competitor sensors to a Yokogawa analyzer, the customer is responsible for determining all wiring connections given the wiring information available in the analyzer's instruction manual.

For additional assistance, please contact Technial Support at 1-800-524-7378 or support@us.yokogawa.com.

Related Products & Solutions

  • 2-Wire Transmitter/Analyzer FLXA21

    The FLEXA™ series analyzers are used for continuous on-line measurements in industrial installations. With an option for single or dual sensor measurement, they are the most flexible two-wire analyzer available.

    See More

  • Conductivity Analyzers

    • Conductivity analyzers, meters, transmitters
    • Continuous process measurement and monitoring
    • Conductivity, resistivity, WIFI, demineralizer water, RO water, percent concentration, boiler blowdown, TDS
    See More

  • Conductivity Sensors

    • Conductivity sensors and electrodes
    • Process conductivity, resistivity, WIFI, demineralizer water, RO water, percent concentration, boiler blowdown, and TDS 
    • Retractable, flow thru, immersion, and direct insertion
    See More

  • pH and ORP Analyzers

    pH and ORP meters, analyzers and transmitters are used for continuous process monitoring of pH and ORP to ensure water/product quality, monitor effluent discharge, batch neutralization, pulp stock, scrubbers, cooling towers, chemical, water/wastewater treatment and many other applications.

    See More
Top