TC10

TC10 Temperature Controller

The Yokogawa TC10 is a compact, all-in-one, single loop temperature controller with an easy-to-read, 3-color LED display. The shallow depth of the controller helps to save instrument panel space. The TC10 supports easy configuration for quick start-up, and its PID allows for overshoot and undershoot control, so the end user can maintain a direct and constant temperature or accurate flow. TC10’s compact design allows for a broad range of applications/uses while maintaining a high level of accuracy.

Main Features

  • Compact size: 48 x 48 mm (1/16 DIN), depth of 48 mm + 14 mm (terminals)
  • 3 Dynamic Colors Led Display
  • Universal input: (TC, mV, V, mA, Pt100-Pt1000)
  • 4 Set Points and alarm functions
  • Serial communication: RS-485 Modbus
  • PID control, ON/OFF, Auto-tuning
  • IP65 front panel (when the optional panel gasket is mounted)(optional)

Details

Single Loop Temperature Controller Features

  • TC Temperature ControllerUniversal Input: TC, mV, V, mA, Pt100, Pt1000
  • Power consumption: 4.5 VA max. (24 VAC/DC), 6.0 VA max. (100 to 240 VAC)
  • Insulation voltage: 2300 V rms according to EN 61010-1
  • Display updating time: 500 ms
  • Sampling time: 130 ms
  • Front protection: IP 65 (when the optional panel gasket is mounted)
  • Accessories: Mounting bracket, Quick Guide
  • Compact size 
    depth: 48 mm + 14 mm (terminals)

TC Temperature Controller

 

  • Operative Modes: Auto / Manual / Stand-by (force control output to zero)
  • Control Output: Relay or DCV for SSR

TC Temperature Controller

 

  • Serial Communication (optional): RS-485 MODBUS
  • PID control with single or double action with overshoot control (Fuzzy overshoot control), ON/OFF, ON/OFF Neutral Zone, Auto-tuning, and Self-tuning
TC Temperature Controller
Image Above Displays Fuzzy Logic Overshoot Control
Number of setpoint value: 1 to 4
TC10
Display 4 digits, 2 groups
Green/red/orange
(active display)
Green
Key 4
Input TC, RTD, mV, V, mA
Input Accuracy ±0.5%
Output Relay, SSR, mA
DI 2 points max.
DO (alarm) 3 points max.
SP 4 points
Control functions ON/OFF control
PID control
Heating/cooling control
Control period 130 msec
Overshoot suppressing function Yes
Auto/Man switch Yes
Setpoint transmission
(communication)
Yes
Two input correction Yes
Power consumption, running time display Yes
Retransmission output Possible on some models
Heater disconnection alarm No
Communication function RS485
Security Parameter access restriction function
Depth (mm) 62
Terminal type Clamp terminal
Side-by-side mounting No
Dust and water protection IP65 (gasket option)
Standard cUL/CE
Power supply AC 100-240V

 

Dependable 3 year warranty*1 

  • Backed by the high reliability and quality that Yokogawa has cultivated over many years.

Dust-proof and water-proof front panel*2

  • IP65 Certification when the optional panel gasket is mounted

Terminal Protection

  • IP20 Certification*3

TC Temperature Controller     TC Temperature Controller

 

 

  1. The 3-year warranty extends 36 months after shipment from our factory.
  2. IP65 rated as "dust tight" and protected against water projected from a nozzle when the optional panel gasket is mounted (for indoor locations) according to EN 60070-1.
  3. IP 20 according to EN 60070-1

Resources

Overview:

The TC series of temperature controllers is perfect for controlling the heating temperature of sealing parts and the temperature of sealing rolls (pre-heating) in a variety of different wrapping machinery.

Yes. Set DISP to nonE.
Yes, by changing the DP setting from 0 to 1. When you do this, the upper limit range of 1000°C becomes 999.9°C.
How many analog outputs are there?
(ns-faq-ut-2204-spec)
There is 1 analog output.
Yes. Refer to Specifications
Can I initialize parameters on the TC10?
(ns-faq-ut-2225-setting)
Yes. On the PASS screen, set “-481.”
Yes, if the input type is voltage or current.
Set detailed parameter out group o1.F (output 1 function) = r.inP.
AL on the front of the TC10 is the alarm lamp. 1 to 4 indicate the status of outputs 1 to 4.
On burnout, it will be 0 mA. There is no parameter for specifying the output direction.
The SP value is not displayed if you don’t specify a control operation. Assign OP4 to the control output operation.
Approximately 2 seconds or less. (63% response when the input changes from 10% → 90%)
What is the TC10’s warranty period?
(ns-faq-ut-2253-other)
18 months (a year and a half) after shipment from the factory.
No, they’re clamp terminals.
Pt100: 150 μA Pt1000: 15.5 μA

Downloads

Looking for more information on our people, technology and solutions?

Contact Us

Top