Skip navigation
Go to Global Navigation
Go to Primary Contents
Go to Site Information

GLOBAL TOP

CLOSE

Chart Plotter

Chart Plotters System Descriptions

A chart plotter indicates a ship's position by means of a light mark on a chart overlaid on a plot table. The light mark continuously shows the ship's position using data supplied from another positioning system. With the reduction of the chart workload, personnel can focus their attention on maneuvering the ship, keeping watch, and other tasks.

SPL2000 : This type is suitable for all types of vessels.

SPL500M : This type has a compact design and requires less space.

System Configuration

System Configuration of SPL2000

System Configuration of SPL2000

Top of this page

Easy Operation - How to setup the chart -

 
1. Set desired chart on plot table.
 
4. Light mark will move to current ship's position.
 
 
fig1
 
fig4
 
         
 
2. Put chart number into operation unit.
(Key operation)
 
5. Ship's position can be read out.
 
 
fig2
 
fig5
 
         
 
3. Adjust the setting points.
(Key operation)
     
 
fig3
     


Top of this page

Explanation of Units

HR402 Plot Table

This table is large enough size to accommodate any chart currently used in the world. Aship's position (i.e. the light mark) can be shown on a chart made according to varioustypes of geodetic methods such as Mercator's.

 

HH507 Operation Unit

This unit is used to select the type of chart and input data for operating the chart plotter.This unit also digitally displays a ship's position.

 

Top of this page

Inquiry

Service and Maintenance Inquiries
For inquiries on consumable and service parts, consultations about repair and inspection, or questions about using our products, please click on the following:

Product Inquiries
For consultations about our products and requests for catalogs or quotations, please click on the following: