Name: Datenerfassungssoftware GA10
Brand: Yokogawa
SKU: data-logging-software-ga10

Bulletins
Bedienungs-anleitungen
Datenblätter
Technischer Support

Die SMARTDAC+ GA10-Datenerfassungssoftware ist ein Programm zur Überwachung und Aufzeichnung von Daten über einen PC. Die Software spart Zeit und Aufwand, indem sie die Überwachung und Aufzeichnung von Daten verschiedener Geräte in einem Netzwerk auf einem einzigen PC zentralisiert.

Merkmale

Konnektivität mit zahlreichen Geräten

Breite Unterstützung für Datenerfassungssysteme, Aufzeichnungsgeräte, Temperaturregler, Signalaufbereitungsfunktionen, Leistungsüberwachungsgeräte und Leistungsmessgeräte. Erfasst sogar Daten von Modbus-Geräten.

Einfache Einstellungen

Wählen Sie einfach ein zu verbindendes Gerät aus und beginnen Sie mit der Überwachung (einfacher Einstellungsmodus)
Konfigurieren Sie ganz einfach den automatischen Ausdruck von Trend-Wellenformen (Berichts-/Druckfunktionen optional)

Hohe Zuverlässigkeit

Automatische Wiederherstellung der Verbindung bei Verlust der Kommunikation, Schutz der Datendateien bis zum Zeitpunkt des Stromausfalls
Datenergänzungsfunktion (Auffüllfunktion)
Serverbetriebssystemunterstützung

Übersichtlicher Bildschirm

Große Auswahl an Anzeigebildschirmen
Echtzeitüberwachung

Vielfältige Funktionen

Akustischer Alarm
Senden per E-Mail
MATH-Kanäle (*Option)
Ausdruck von Berichten (*Option)
Parallele Aufzeichnung mehrerer unabhängiger Projekte
2 Zeitmodi
Benutzerrechte-Einstellungen
Überwachungs-PC hinzufügen (Client) (*Option)
OPC-UA-Server (*Option)
DDE-Server
Benutzerdefinierte Anzeige (*Option) Neu!

Überwacht und erfasst Daten von zahlreichen unterschiedlichen Instrumenten über Netzwerke

Übersichtlicher Bildschirm

Große Auswahl an Anzeigebildschirmen
(1) Trendanzeige (2) Digitale Anzeige (3) Balkendiagrammanzeige (4) Messgerätanzeige (5) Alarmüberwachung/-protokollierung (6) Benutzerdefiniert

Wide variety of display screens

Benutzerdefinierte Anzeigefunktion (/CG Option) *Neu

Zeichnen Sie Ihren Prozess auf und überwachen Sie ihn direkt über Ihren PC, und bilden Sie Ihren Prozess in der benutzerdefinierten Anzeige ab

Sample GA10 custom screen

Erstellen Sie bis zu 50 Bildschirme
Bedienen Sie angeschlossene Geräte direkt über den Monitor
* Über den Modbus-Write-Befehl
Enthält DAQStudio für die Bildschirmerstellung

Konnektivität mit zahlreichen Geräten

Breite Unterstützung für Datenerfassungssysteme, Aufzeichnungsgeräte, Temperaturregler, Signalaufbereitungsfunktionen, Leistungsüberwachungsgeräte und Leistungsmessgeräte.
Erfasst sogar Daten von Modbus-Geräten.

Connectivity with many devices

Die Tabelle unten listet die kompatiblen Modelle auf.

Kompatible Modelle

	Anzuschließende Modelle
Datenerfassungsgerät	GM10
	MX100, MW100
	DA100
Aufzeichnungsgerät	GX10, GX20, GP10, GP20
	DX1000, DX1000N, DX2000
	DX1000T, DX2000T
	FX1000
	MV1000, MV2000
	CX1000, CX2000
	μR10000, μR20000
	DR130, DR230, DR240
Temperaturregler	UT75A, UT52A, UT55A, UT35A, UT32A, UP55A, UP35A, UM33A
PLC	FA-M3V(F3SP7x) (als Modbus-Instrumente angeschlossen)
Leistungsüberwachungsgerät	PR300, UPM100, UPM101 (als Modbus-Instrumente angeschlossen)
Signalaufbereitung	VJU7, VJS7, VJA7, VJH7, VJP8, VJQ7, VJQ8, VJX7, MVHK, MVRK, MVTK (als Modbus-Instrumente angeschlossen)
Leistungsmessgerät	WT300^, WT500^, WT1800^*,WT3000, WT3000E
Modbus-Gerät	Instrumente, die Modbus-Kommunikation unterstützen
Software	DAQ32Plus, MXLOGGER

* Kostenlose GateWT-Software für die Verbindung mit WT300, WT500 und WT1800 erhältlich

Einfache Einstellungen

Automatische Druckeinstellungen

Automatischer Ausdruck von Trend- und anderen Diagrammen. Konfiguration durch Auswahl von Inhalten, Zielkanälen, Druckern und anderen Einstellungen.
Benutzerdefinierbares Layout mit Ausgabe in Excel oder PDF. (Berichts-/Druckfunktionen optional)

Auto print settings

Erfassungseinstellungen

Wählen Sie einfach das zu verbindende Instrument aus und erfassen Sie sofort Daten. Wenn Sie ein Datenerfassungsgerät/-aufzeichnungsgerät verwenden, werden die Tagnamen automatisch angewendet.* Sie können problemlos mehrere Kanäle scannen. Sie können außerdem die erweiterten Einstellungen anpassen.

* Anwendbare Aufzeichnungs-/Datenerfassungsmodelle

Aquisition settings

Hohe Zuverlässigkeit

Automatische Wiederherstellung der Verbindung bei Verlust der Kommunikation, Schutz der Datendateien bis zum Zeitpunkt des Stromausfalls
Datenergänzungsfunktion (Auffüllfunktion)*
* Bei Verwendung des GM/GX/GP/DX/MV-Hauptgeräts wird die Instrumentenzeit für den Zeitstempel verwendet

Data supplementing function

Serverbetriebssystemunterstützung
Ermöglicht den Aufbau hochzuverlässiger Systeme, die auch im Dauerbetrieb nicht versagen

Vielfältige Funktionen

Akustischer Alarm
- Akustisches Warnsignal am PC bei auftretenden Alarmen
Senden per E-Mail
- Versenden per E-Mail basierend auf dem jeweiligen Erfassungsstatus
- Sie können verschiedene Sendebedingungen und Inhalte festlegen
- SMTP-Authentifizierung / POP vor SMTP
MATH-Kanäle *Option
- Berechnung anhand gemessener Daten in Echtzeit
- Unterstützt grundlegende mathematische und zahlreiche andere Operationen
- Alarme können ebenfalls eingestellt werden
Ausdruck von Berichten *Option
- Automatischer Ausdruck von Daten einschließlich Trends, momentanen Werten und stündlichen/täglichen Berichten
- Unterstützt die Anpassung des Layouts und Ausgabe in PDF/Excel
OPC-UA-Server *Option
- Unterstützt die OPC-UA-Kommunikation für hohe Zuverlässigkeit und Sicherheit
- Nutzt gemessene Daten in unterstützten SCADA, Datenbanken und anderen Plattformen
- Bestätigte OPC-UA-Produkte:
  
  FAST/TOOLS V9.05 (YOKOGAWA)
  
  GENESIS64 7.6.6 (iconics)
  
  Ignition V10.85 (induktive Automation)

Parallele Aufzeichnung mehrerer unabhängiger Projekte
- Ermöglicht die Erfassung mehrerer Daten zu unterschiedlichen Zeiten
2 Zeitmodi
- Sie können die PC- oder Instrumentenzeit für den Zeitstempel verwenden
- Bewahrt die Konsistenz mit den Hauptgerätedateien des Instruments
Benutzerrechte-Einstellungen
- 4 verfügbare Rechtestufen: Eigentümer, Manager, Bediener oder Überwacher
Überwachungs-PC hinzufügen (Client) *Option
- Überwachen und teilen Sie Daten an mehreren Computern
DDE-Server
- Nutzen Sie gemessene Daten in DDE-kompatibler Software einschließlich Microsoft Excel
Benutzerdefinierte Anzeige NEU *Option
- Passen Sie das Komponentenlayout nach Belieben an (wie etwa digitale, Trend-, Leisten- und Bildkomponenten).
- Ermöglicht die Überwachung mit an Ihre Umgebung angepassten benutzerdefinierten Anzeigen.

Datenüberwachung in Produktionsstätten

Überwachung der Produktionsdaten vom Büro aus.
Sie können darüber hinaus Clients hinzufügen und Daten über mehrere Computer austauschen.

Data monitoring in manufacturing sites

Datenaufzeichnung von mehreren Geräten

Speichert Test-/Produktionsgerätedaten auf einem PC.
Sie können auch einzelne Geräte zu unterschiedlichen Zeiten aufzeichnen.

Recording data from multiple equipments

Modbus-Bedienung über benutzerdefinierte Anzeigen *Neu

Ändern Sie die Werte der Modbus-Verzeichnisse über benutzerdefinierte Anzeigen.
Darüber hinaus können Sie den Betriebsmodus ändern (Steuern oder Aufzeichnen).

Modbus operation via custom displays

【Support-Informationen】Liste der Modelle, die PC-Software unterstützen

Liste der kompatiblen Modelle, die verschiedene PC-Software unterstützen.

Mehr anzeigen

Applikations-beschreibungen

Data Display and Recording for Water Purification Equipment

Applikations-beschreibungen

Equipment Maintenance in a Power Plant

Applikations-beschreibungen

Data Acquisition and Monitoring for Film Manufacturing Equipment

Applikations-beschreibungen

Tank Level Control and Monitoring in Food Manufacturing Processes

Applikations-beschreibungen

Electrolyzer Solution: Instruments and Solution for Ion-Membrane Electrolyzer Plant Application

Applikations-beschreibungen

Constructing a Monitoring System Using Existing Sensors

Artikel (EN)

New products created from business development that leverages our unique strengths in "Measurement, Imaging, Analysis, Diagnosis, Integration" Environmental monitoring system provided by YOKOGAWA

Gate software can't "Service start" on Windows Vista.

(ns-faq-daqworx-13027-spec)

GateDX-P, GateWT, GateOPC, and GateMODBUS can be run as an automatically executing service, but this is not available on Windows Vista. Instead, please use the function included in the latest version (GateDX-P: R1.05 or later, GateWT: R2.04 or later,...

When I try to connect the WT300 series and perform automatic model determination on the GateWT, the message, "Cannot open a communication port" appears.

(ns-faq-daqworx-13070-soft)

My OS is Windows 7. I've disabled all my Windows firewall settings. I get a response to a ping. I changed the WT300 series communication settings to WT200 compatible mode. When connecting the WT300 with GateWT, you should actually e...

What should I enter for the host name and IP address the first time I log in to the SMARTDAC+ GA10? Do I enter the IP address of the instrument that I want to connect to?

(ns-faq-ga10-15001-soft)

Enter "localhost." The "localhost" represents the PC you are currently using. You can enter the IP address of the instrument to which you want to connect in the project settings after logging in.

What are the main functions of the SMARTDAC+ GA10?

(ns-faq-ga10-15002-term)

The GA10 software acquires data from a variety of instruments including recorders and data loggers via network. You can perform data monitoring on a PC and record to hard disk.

How can I obtain the SMARTDAC+ GA10's 60-day free trial?

(ns-faq-ga10-15003-other)

Download it from our website. After 60 days, you can enter a license that you purchase to continue using the product.

How do I log in SMARTDAC+ GA10 for the first time?

(ns-faq-ga10-15004-setting)

Type the credentials below. No other changes are needed. IP address: localhost (the PC you are currently using) Port: 50310 User name: admin Password: [leave blank]

Can I connect SMARTDAC+ GA10 to discontinued instruments?

(ns-faq-ga10-15005-connect)

Acquisition is possible via our DAQWORX software (DAQLOGGER and DAQ32Plus).

What are SMARTDAC+ GA10's Modbus device definition files?

(ns-faq-ga10-15006-term)

These files contain information required for the GA10 to connect to Modbus-compliant devices. They can be created with the Modbus device definition file creation tool.

Can I connect SMARTDAC+ GA10 with non-Yokogawa instruments?

(ns-faq-ga10-15007-connect)

Yes, if they are Modbus-compliant.

How do I perform SMARTDAC+ GA10's multi-logging?

(ns-faq-ga10-15009-setting)

Create multiple projects and then run them in parallel.

I can't select a scan interval in device time mode of SMARTDAC+ GA10.

(ns-faq-ga10-15010-spec)

The scan interval set on the device is automatically used. To change this setting, change it on the device.

In what format is data saved for SMARTDAC+ GA10?

(ns-faq-ga10-15011-spec)

You can select binary, Excel, or both.

With SMARTDAC+ GA10, can I save data to an external hard disk (HDD)?

(ns-faq-ga10-15012-spec)

Yes, but it is not recommended because damage can result if cables become unplugged, and in other circumstances.

With SMARTDAC+ GA10, can I set a threshold value for monitoring alarms?

(ns-faq-ga10-15013-setting)

You can, with a computation function (option). Assign measurement channels to MATH channels, and set alarms on the MATH channels.

Can you tell me about the alarm ACK setting on the SMARTDAC+ GA10's main unit?

(ns-faq-ga10-15014-spec)

You cannot set up alarm ACK on the main unit by using the GA10. Set up ACK on the instrument.

When checking past waveforms in the SMARTDAC+ GA10's trend monitor, how far back can I go?

(ns-faq-ga10-15015-spec)

If recording at the same interval as the scan interval, you can go all the way back to recording start. Otherwise, you can only go back to the last 3600 points.

What are the main functions of the SMARTDAC+ GA10CL?

(ns-faq-ga10-15016-term)

You can use this to view GA10 data from another PC. Operation is available using the same screen as the GA10.

Where is the data save location when using the SMARTDAC+ GA10CL?

(ns-faq-ga10-15017-spec)

It is the GA10 installation folder on the PC. You can check this in the setting screen.

How can I use the SMARTDAC+ GA10's DDE server with Excel?

(ns-faq-ga10-15019-spec)

If you type a keyword in an Excel cell, it is automatically replaced with GA10 data. Ex.) To use the instantaneous value of Tag0001 in a project called "Test", type: =DLGDDE|'Test'!tag0001

Is there a way to access the DDE server from another PC application?

(ns-faq-ga10-15020-connect)

Yes, by installing the SMARTDAC+ GA10CL on the same PC as the application.

With SMARTDAC+ GA10, can I upgrade the version from R1 to R2?

(ns-faq-ga10-15021-spec)

Yes, there is a free upgrade for this. If you need the latest functionality in version R2, purchase the GA10UP upgrade license.

With SMARTDAC+ GA10, can I add functions and upgrade channels after purchase?

(ns-faq-ga10-15022-spec)

Yes, by purchasing an upgrade license (GA10UP-**). To add multiple functions or channel upgrades, purchase a GA10UP-** license for each. Ex.) To add report printing and MATH: Purchase 1 each of GA10UP-RP and GA10UP-MT

How do I enter multiple SMARTDAC+ GA10UP licenses?

(ns-faq-ga10-15023-setting)

In the GA10 software, you can enter licenses more than once. Each time you enter a license, functions or channels are added.

What is the report printing function for SMARTDAC+ GA10?

(ns-faq-ga10-15024-term)

It automatically prints trends and lets you customize their layouts. Depending on the settings, it can output to Excel or PDF.

Can you tell me about the 64-bit (as opposed to a 32-bit) OS recommended operating environment for SMARTDAC+ GA10?

(ns-faq-ga10-15027-spec)

With a 32-bit OS, the report printing function has a limited recording duration and number of recording tags. We recommend a 64-bit OS for this instrument. See the general specifications for details.

What is the minimum amount of memory that must be installed for SMARTDAC+ GA10?

(ns-faq-ga10-15028-spec)

For general use, 2 GB. If using the report printing function, increase this according to the number of recording tags and recording interval. See the general specifications for details.

With SMARTDAC+ GA10, can I print computation over an area specified by cursor after recording?

(ns-faq-ga10-15029-setting)

Yes, by using the viewer (report printing option not required). However, you cannot customize the layout.

With SMARTDAC+ GA10, can I insert Excel graphs and images into Excel templates?

(ns-faq-ga10-15030-spec)

Yes.

What is the SMARTDAC+ GA10's MATH function?

(ns-faq-ga10-15031-term)

The MATH function lets you perform real-time computations with data from measurement channels. Ex.) For unit conversion, you can multiply all values by 1000.

With SMARTDAC+ GA10, can I perform MATH operations in device time mode?

(ns-faq-ga10-15032-spec)

No. This is not supported because the times and acquisition timings differ between instruments.

What is the SMARTDAC+ GA10's OPC-UA server function?

(ns-faq-ga10-15034-term)

The OPC-UA server function lets you use data measured by the GA10 on SCADA and other upstream database systems.

With SMARTDAC+ GA10, can I perform monitor display and recording with OPC-UA projects?

(ns-faq-ga10-15035-setting)

No. Create a separate normal project. For details, see the user's manual (IM 04L65B01-01EN).

What are server certificates and self-signed certificates for SMARTDAC+ GA10?

(ns-faq-ga10-15036-term)

To communicate via OPC-UA, you must have a certificate for authorization called a "server certificate." If you have a certificate, install it on the GA10. If you do not have a certificate, you can create and install one that is signed by th...

Is the SMARTDAC+ GA10 compatible with other OPC (DA, HAD, A&E, etc.)?

(ns-faq-ga10-15037-connect)

No.

I created a definition file using the Modbus Device Definition File Creating Tool, but I can't register the device on the SMARTDAC+ GA10.

(ns-faq-ga10-15038-soft)

Do the following, and then register the device with the "Register Device" button under "Devices List." Make sure the device name input on the tool is the same as the file name. Make sure the definition file is saved in the spe...

I do a search for devices on the SMARTDAC+ GA10 but it does not detect GateWT for GA10. What should I do?

(ns-faq-ga10-15040-soft)

First launch GateWT for GA10, then register GateWT for GA10 with the Register Device button under Devices List.

Up to what screen resolution is supported for SMARTDAC+ GA10?

(ns-faq-ga10-15042-spec)

1024 × 768 dots or more. 1680 × 1050 dots is the highest that has been operationally verified. There's no particular limit, so please try the trial version.

With SMARTDAC+ GA10, can I use dual monitors?

(ns-faq-ga10-15043-spec)

You can use dual monitors on PCs that have the server and client installed.

How can I connect a WT series power meter (Yokogawa Meters & Instruments Corp.) with the SMARTDAC+ GA10?

(ns-faq-ga10-15039-soft)

Use GateWT for GA10. You can download free of charge it from our website. *Log-in Required

I'm upgrading (replacing) my PC. How should I transfer the settings for SMARTDAC+ GA10?

(ns-faq-ga10-15041-setting)

You can transfer them by exporting the projects (in units of acquisition and recording) and then importing them. For details, see section 3.3.1, “Creating a Project in Detail Settings Mode” in the data logging software user's manual (...

(ns-faq-ga10-15044-spec)

Absolutely. However, note that if you have more than 4 GB of memory, you'll need to use a 64-bit OS for it to have any effect. If you're going to use more than 4 GB of memory, use a 64-bit OS and the 64-bit version of the software.

On GateWT for GA10, Error “E211” appears when pressing the Save button. When trying to register GateWT for GA10 on the GA10, Error “E3020” appears when pressing the Register Device button.

(ns-faq-ga10-15046-setting)

Q: On GateWT for GA10, when I press the Save button, Error "E211 Cannot write to file" appears. Also, when I try to register GateWT for GA10 on the SMARTDAC+ GA10, when I press the Register Device button, Error "E3020 Server can not re...

When adding the /CG (Custom Display function) to the SMARTDAC+ GA10, Do I have to purchase DAQStudio?

(ns-faq-ga10-15050-other)

No. Your DAQStudio license includes /CG. However, you do need to download it from a separate website.

I want to connect the WT300 series to the SMARTDAC+ GA10 through GateWT for GA10. When I perform automatic model determination on GateWT for GA10, I get a communication open error. When I ping it, I get a response.

(ns-faq-ga10-15051-setting)

Set communication on the WT300 series to WT200 mode.

On the SMARTDAC+ GA10, is the log of alarms recorded?

(ns-faq-ga10-15052-spec)

Yes. The alarm list screen displays the most recent 1000 alarms that occurred since data acquisition started.

Logs appear in the SMARTDAC+ GA10 log dialog. Can I record logs to files?

(ns-faq-ga10-15053-spec)

No. It only displays the 1000 most recent logs between the time the user logged in and then logged out.

I registered an admin user password on the SMARTDAC+ GA10. Can I return the GA10 admin user password to "blank" (unspecified)?

(ns-faq-ga10-15054-other)

No. Once an admin password is registered, it cannot be returned to an unregistered state.

Does an alarm appear when SMARTDAC+ GA10's communication is broken?

(ns-faq-ga10-15047-spec)

It does, starting with version 2.02. An audible alarm sounds on the PC as a communication error. You are notified of the break when the ACK (Acknowledge of Device Communication Interference) icon blinks, and by the communication status icon on the pr...

Regarding SMARTDAC+ GA10, can you tell me what functions display messages during network abnormalities?

(ns-faq-ga10-15048-spec)

The following functions are available. Notification of Alarms and Communication Errors with Sound (section 6.6.2) Viewing the Log (section 6.10) Email Event Setting (Send Conditions: Comm. Status [Communication Disconnect], [Communication Recove...

I'm trying to install the SMARTDAC+ GA10 client software but when I enter my GA10CL license the install doesn’t continue.

(ns-faq-ga10-15049-soft)

For the GA10 there is the GA10 and a client function-only GA10CL. When installing the GA10 client software, download GA10CL. *Log-in Required ...

When using the SMARTDAC+ GA10's email function, can I can send an email to multiple recipients?

(ns-faq-ga10-15055-spec)

Yes. To send to multiple recipients, separate the addresses with a semicolon " ; ".

With the SMARTDAC+ GA10, you select a basic specification code according to the number of channels. When logging on an instrument with math and communication channels, do I have to add the number of those channels to the input channels?

(ns-faq-ga10-15056-spec)

Yes. The "number of input channels" on the GA10 is the number of channels that are input to the GA10. When logging an instrument's MATH and communication channels on the GA10, add the number of those channels.

On the SMARTDAC+ GA10, you can set access rights. I’m setting up a general user, but what is the user’s default login password?

(ns-faq-ga10-15057-setting)

The default password for general users is blank. After the general user logs in (with no password), he or she can set up a new password by selecting User > Edit.

I created a project using the SMARTDAC+ GA10 easy settings. The alarm doesn’t make a sound, can you tell me how to set that up?

(ns-faq-ga10-15058-setting)

The alarm doesn't sound with version R3.03.01 or earlier. You can update to the latest version, or do the following: 1) In Easy Setting mode, click the Details button to switch to detailed setting mode. 2) Display the Tag setting screen, then cha...

When I set the SMARTDAC+ GA10 install destination to the desktop, the install fails and the message, "Start Service Failed! (Access denied) On Start Service ()" appears.

(ns-faq-ga10-15059-spec)

We recommend using the default installation destination. Don’t install to the desktop or other user folders.

What is the computer validation category classification of SMARTDAC+ GA10 in pharmaceutical factories?

(ns-faq-ga10-15060-spec)

The category differs depending on the suffix codes. If neither the MATH (/MT) nor custom display (/CG) are added, it's category 3. If either MATH (/MT) or the custom display (/CG) are added, it’s category 4.

Can I connect the PR300 Power Monitor to SMARTDAC+ GA10?

(ns-faq-ga10-15061-spec)

Yes. Create a definition file using the Modbus device definition file creation tool, and connect. For information on creating Modbus device definition files, see the GA10 user’s manual.

Can I connect the WT1800/WT1800E Precision Power Analyzer to the SMARTDAC+ GA10? It’s not listed in the supported devices in the manual.

(ns-faq-ga10-15062-spec)

Yes. Connect the WT1800 via GateWT for GA10 (free). If you are able to change the WT1800E command type, change it to WT1800 compatible, and then connect via GateWT for GA10. If you can't change the command type, connect using Modbus. See “R...

Can I clear the SMARTDAC+ GA10 alarm sound?

(ns-faq-ga10-15063-setting)

Yes. Click Operation > Alarm sound, and then clear the check mark. See section 6.6.2, "Notification of Alarms and Communication Errors with Sound" in user’s manual IM 04L65B01-01EN. ...

Can I change the SMARTDAC+ GA10 alarm sound?

(ns-faq-ga10-15064-setting)

Yes, in version 3.03.xx or later you can set each alarm individually. You can register up to twenty .mp3 format alarm sounds.

If the time on the PC and the connected instrument are different, which time is recorded, SMARTDAC+ GA10's or connected instruments'?

(ns-faq-ga10-15065-setting)

In the data acquisition parameters, under “Data time," you can select "Use PC time" or "Use instrument time." See section 12.2, question 12: “What is the difference between setting the Data time to PC time and set...

Can I connect the GM10 to the SMARTDAC+ series GA10 data logging software?

(ns-faq-gm-14015-spec)

Please check the version of the GA10. You can connect the GM10 if the GA10 is version later than R2.01.01. If you have a GA10 of version of R1.01.02 or earlier, you can download an upgrade at the URL below. SMARTDAC+ Microsite ...

[GA10] What kind of results will be obtained if the learning period of the anomaly detection function AI is insufficient?

(ns-faq-ai-ga-20090-setting)

The message below is displayed in the popup. Follow the prompts to set the learning period. "M1033 Cannot learn again because the specified period is short. Please set that the time from the start of the period to the end of the period exceeds ...

[GA10] The anomaly detection function displays an analysis error after learning.

(ns-faq-ai-ga-20091-setting)

Set the monitor interval to 10 seconds or more. See also "3.3.6 Configuring the Anomaly Detection Function" and "Behavior of the anomaly detection function 'analysis error'" in the user's manual. ...

[GA10] I cannot connect to GA10 and Multi-Tech LoRaWAN Gateway.

(ns-faq-ai-ga-20092-other)

The communication port may be closed due to virus detection software or your internal network security. Please contact your IT administrator.

[GA10] Even if GateSushi is restarted, the setting data set last time remains.

(ns-faq-ai-ga-20093-spec)

GateSushi always retains the most recent setting data.

[GA10] I get a message on GA10 that the learning period is short. (M1033)

(ns-faq-ai-ga-20094-setting)

Follow the prompts to set the learning period. "M1033 Cannot learn again because the specified period is short. Please set that the time from the start of the period to the end of the period exceeds the following. [Monitor interval] x [Number o...

[GA10] The tag name of a Sushi Sensor (Sensor tag) is not assigned on the GateSushi screen.

(ns-faq-ai-ga-20095-setting)

The tag name (Sensor tag) is updated at regular intervals. If you want to update quickly, restart the Sushi Sensor.

[GA10] How do I check whether the anomaly detection function is learning or detecting?

(ns-faq-ai-ga-20096-spec)

The status appears on the right side of the monitor interval display on the trend graph screen. "Detection" indicates that the system is detecting anomalies. User’s Manual IM 04L65B01-01EN ...

[GA10] How does the anomaly detection function judge between normal and anomalous data?

(ns-faq-ai-ga-20097-spec)

The Anomaly Detection function learns the collected data and recognizes the range of learned data as normal. Data outside of that range is judged as an anomaly.

[GA10] Is it possible to send an email when an anomaly is detected?

(ns-faq-ai-ga-20098-setting)

Yes, with the math function (/MT) option. Set the formula for calculating the anomaly detection score (HealthScore), set the low alarm (alarm value: less than zero) in the formula, and then set the conditions for sending email when the alarm status o...

[GA10] Can GA10 monitor the battery life of a Sushi sensor?

(ns-faq-ai-ga-20102-spec)

Yes. User’s Manual IM 04L65B01-01EN

[GA10] Can GateSushi (/SU) set alarms?

(ns-faq-ai-ga-20103-spec)

Yes, GateSushi function (/SU) can set 4 levels of alarms per Sushi sensor. The /MT option is not required. The alarm value can be changed even during acquisition. User’s Manual IM 04L65B01-01EN ...

[GA10] Does the anomaly detection function come standard or is it an option?

(ns-faq-ai-ga-20106-spec)

The anomaly detection function is a standard function. Customers who have already purchased an older model can upgrade for free. GA10 Data Logging Software (log-in required) ...

[GA10] Is there a limit to the monitor interval (sampling interval), when using the anomaly detection function?

(ns-faq-ai-ga-20107-spec)

When using anomaly detection, set 10 seconds or more for the monitor interval. If you set less than 10 seconds, anomaly detection is not run. User’s Manual IM 04L65B01-01EN ...

[GA10] Is there a channel (tag) limit for the anomaly detection function?

(ns-faq-ai-ga-20108-spec)

The anomaly detection function is run at the display group level. Up to 50 channels (tags) can be assigned to one display group.

[GA10] Does the anomaly detection function relearn if normal data changes after learning?

(ns-faq-ai-ga-20109-spec)

Not relearn during detection. If the normal data changes, let the anomaly detection function learn again.

[GA10] What is the criterion for the anomaly detection function to determine an abnormality?

(ns-faq-ai-ga-20110-spec)

The anomaly detection function (AI) learns from normal data derived from regular operations and automatically creates a criterion for anomalies.

[GA10] How do I set the learning period for anomaly detection function? (start of the learning, end of the learning)

(ns-faq-ai-ga-20111-setting)

You can choose one of two learning periods: ・[When the period has not been specified (initial values)] ・[When the period has been specified]. [When the period has not been specified (initial values)]: When anomaly detection starts, it learns f...

[GA10] Can GA10 detect an anomaly in past (recorded) data?

(ns-faq-ai-ga-20112-spec)

No. Anomalies can be detected only from the data being acquired.

[GA10] How long does it take to learn anomaly detection data?

(ns-faq-ai-ga-20113-spec)

The learning period is determined by the monitor interval and the number of tags in the display group. The appropriate learning period is set as the initial value based on the following formula: Monitor interval x No. of tags in the display group x ...