The YS1500 Indicating Controller incorporates fundamental control functions required for PID control. Necessary functions can be selected in accordance with the user's purpose. The available functions include those necessary for input signal processing, such as square root extraction, linear segment conversion, and feed-forward calculation. Also available are Single-loop, cascade, and selector modes. Standard models are smaller and lighter than earlier series, requiring less space for installation. These are compliant with international safety standards including the CE Mark and FM nonincendive (optional) approvals. For an easy replacement of earlier controllers or models requiring the same panel cutout dimensions & depth, we also offer the YS1500 in the same size as its pretosessor.
Details
Features
- Excellent legibility thanks to a full-dot color LCD: High visibility of the display screen is ensured even in direct sunlight in the early morning and late afternoon. The user can freely access a desired operation display from meter, trend display, bar graph, alarm, and event displays. All parameters can be set via the front panel display.
- Function selection mode (needs no programming): The multi-function controller mode allows control to be selected from frequently used functions (single-loop, cascade, or selector control) without programming. Function assignments to digital and analog inputs/outputs (DIs, DOs, AIs, and AOs) can be determined by parameter settings.
- Fail-safe: Thanks to dual CPU (one for control and one for display), display and manual operations are enabled even during a failure of either CPU. The hard manual circuit incorporated independently from the digital circuits enables the controller output to be adjusted manually during a failure of a digital circuit including both CPUs. (The hard manual circuit is not incorporated when the /NHM option is specified).
- Nonvolatile memory for memory backup: No battery or capacitor is used for memory backup, facilitating maintenance.
- AC/DC dual power supply with wide operating voltage range to ensure stability against supply voltage fluctuations: Can be driven by either an AC (100 V) or DC (24 V) power supply. Furthermore, the DC power supply enables receiving power without polarity. (Must be specified upon ordering if using a 220 V AC power supply).
- 250 mm depth (for basic types only).
- Dust- and splash-proof IP54 faceplate (for basic type only).
- CE Mark (for basic type and YS100 compliant type only).
- FM Nonincendive explosion protection (optional for basic type only).
- Communication (optional)
- Ethernet (Modbus/TCP; for basic type only).
- RS485 (PC Link, Modbus and YS protocol; unavailable for YS80 internal unit-compatible type).
- DCS-LCS communication. - Compatibility with YS100 Series: Setting and control operations can be done with the same feel. For basic-type cases, terminal-to-terminal pitches differ but the signal-to-terminal arrangement is almost the same.
Easy to use
Display
Programming
YSS1000 Configuration and Programming Software
Programming demonstration video
Three connection modes
Connection modes: USB, Ethernet or RS485
When connecting via RS485 or Ethernet, a communication option is required on the main unit.
Full set of computation functions
-
Supports parameter setting for all YS1000 models
Password protection function
Passwords can be assigned to user programs to prevent unauthorized access to proprietary programs.
A password on the main unit prevents unexpected changes in the engineering parameters.
Compact case
Designed with a Lightweight, Compact Case
Provides for greater freedom of instrumentation design
Compact, lightweight design allows the use of smaller and less expensive panel. Moreover, it allows attachment to doors which was previously difficult.
Simple exterior
High reliability
Control Output Backup Function
The control output backup function comes standard with YS1000 series controllers (YS1700 and YS1500) and the Manual Station for MV Setting (YS1360).
Dual CPU
With dual-CPU construction (main CPU and display CPU), manual control capability and display continues even if an abnormality occurs on one of the CPUs. If controller self-diagnostics detects a control circuit failure, the controller can suspend analog/digital output, switch to manual mode and allow manual control by operator.
Functions/ Failure area |
Main CPU fail | Display CPU fail | All CPU and Control Circuit |
---|---|---|---|
Control with "Hard manual" | X | X | X |
Manual operation with front keys | X | X | N/A |
Display for PV and SV | X | X | N/A |
Control algorithm | stop | stop | stop |
Manual operation-"hard manual"
Independent manual override is built into the control circuits, ensuring that control output can continue even when a control circuit including the CPU experiences a problem.
*Comes standard with YS1700-1xx, YS1500-1xx, YS1360-1xx
Battery free memory backup
Nonvolatile memory is used for memory backup. Service life is improved because no batteries, backup capacitors, or other components are used.
AC/DC power supply resists powerline fluctuations
The AC/DC (100 V /24 V ) power supply powers the instrument to provide consistent performance.Also accepts DC power regardless of polarity (specify 220 V power supply when ordering).
Improved basic control performance
The YS1000 series achieves higher performance than previous models (YS100 series).
- I/O accuracy
Voltage input accuracy: ±0.2% ⇒ ±0.1%
Voltage output accuracy: ±0.3% ⇒ ±0.1%
Current output accuracy: ±1.0% ⇒ ±0.2% - Internal data resolution of the I/O signal: 1/1000 ⇒ 1/10000
- Internal computation resolution of PID and other computations: 1/4096 ⇒ 1/65536
Controller online replacement function (portable manual station)
Use the YS110 portable manual station when exchanging or performing maintenance on a controller. You can switch to the spare controller without interrupting the control output.
Front panel conforms to the IP54 waterproof standard
Tougher environmental resistance.
Other specification
- CE Mark (for basic type and compatible type for YS100)
- FM nonincendive approved (FM Class I, DIV 2)
- CSA safety and nonincendive approved (Class I, DIV 2)
Powerful and Flexible
Ethernet support
The instrument can be easily connected to DAQWORX, SMARTDAC+, general-purpose SCADA, and OPC servers via Ethernet (Modbus/TCP).
Ethernet : Available to the YS1000 basic type. Modbus/TCP server function (one connection).
Communication with PLC
Connections are enabled using the FA-M3' s UT link module and the RS485 communication function. No programming is necessary to exchange data between the instrument and the FA-M3.
The YS1000 can also be connected to PLCs of various manufacturers via the Modbus communication protocol.
Communication with CENTUM
As with previous models, communication with Yokogawa's DCS (CENTUM) is supported. This is ideal for DCS backup in chemical plants and other applications requiring extreamly high reliability.
Applicable Models: YS1700,YS1500,YS1350,and YS1360
Control Function
Self-tuning (STC)
Simplifies tuning when starting up or changing the process unit under control.
Setpoint filter (SVF)
Can optimize tracking with changes in set-points. Also can maintain optimum responsiveness to disturbances.
Flexible DI/DO
The YS1700/YS1500’s six DI/DO terminals can be used for both input and output.
Compatibility
Resources
For safe and efficient operation, the quality of feedwater, steam, and condensate in boiler plants must be controlled and maintained in the most favorable conditions.
To technology in iron & steel industry is continuously improved to obtain the best possible performance. The improved plant performance gives rise to the higher quality improvement and lower cost, and simultaneously environmental friendly plant operation.
Automated control of industrial boilers is an excellent application for YS1700 microprocessor-based loop controllers. These instruments can be programmed to perform the operations of plant master, boiler master, fuel and air control with oxygen trim and drum level/feedwater control.
Downloads
Brochures
Instruction Manuals
- Ethernet Interface Module Model: F3LE01-5T, F3LE11-0T (1.5 MB)
- Notice of a change of YS1000 series terminal screws Cautions for tightening terminal screws when wiring YS1000 series (135 KB)
- Precautions on the Use of the YS1000 Series (Functional Enhancement) (253 KB)
- YS1000 Series Communication Interface User's Manual (Functional Enhancement) (3.6 MB)
- Notice of Alterations - Compliant with Safety and EMC Standards (191 KB)
- YS1000 Series Replacement Manual (2.5 MB)
- Notice of Alterations - Compliant with Safety and EMC Standards (388 KB)
- YS1500 Indicating Controller, YS1700 Programmable Indicating Controller Operation Guide (Functional Enhancement) (4.7 MB)
- YS1500 Indicating Controller, YS1700 Programmable Indicating Controller User's Manual (4.9 MB)
- YSS1000 Setting Software for YS1000 Series, YS1700 Programmable Function User's Manual (12.4 MB)
- YSS1000 Setting Software Installation Manual (Functional Enhancement) (1004 KB)
General Specifications
Technical Information
- Recorders, Data Loggers, and Control Products Security Standard (488 KB)
- Introduction of YS1000 Series (6.5 MB)
- YS1000 Replacement Guide Overview, Model Conversion (Functional Enhancement) (3.8 MB)
- YS1000 Replacement Guide SLPC → YS1700 User Program Conversion (Functional Enhancement) (10.8 MB)
- YS1000 Replacement Guide YS170 → YS1700 User Program Conversion (Functional Enhancement) (9.2 MB)
- YS1000 Series Drawing Package (Guide for selecting new models) (3.5 MB)
- YS1000 Series Replacement Guide Installation and Wiring (Functional Enhancement) (1.6 MB)
Engineering Tools
- YS010 Expandable I/O Terminal (472 KB)
- YS011 Expandable I/O Cable (432 KB)
- YS1000 Series YS1xx0-03x Compatible Type for YS80 Internal Unit/Compatible Type for EBS, I, EK, and HOMAC (378 KB)
- YS1000 Series YS1xx0-04x Compatible Type for YS80 (compatible size for YS80 with YS100 terminal) (295 KB)
- YS1500 Indicating Controller(YS1500-00x), YS1700 Programmable Indicating Controller (YS1700-00x, YS1700-01x) (361 KB)
- YS1000 Series YS1xx0-02x Compatible Type for YS100 (with YS100 case) (327 KB)
- YS1000 Series YS1xx0-05x Compatible Type for Pneumatic 100 Line (with YS100 Terminal) (313 KB)
- YS1000 Series Single loop controller (YS1700-00, YS1500-00, YS1300-00) DXF data (248 KB)
- YS020 120ohm Terminating Resistor for RS422/RS485 Communication (71 KB)
- YS021 250ohm Shunt Resistor for a Built-in 24V Transmitter Power Supply (68 KB)
- YS1000 Series Single loop controller (YS1700-00, YS1500-00, YS1300-00) DWG data (222 KB)
- YS1000 Series Single loop controller (YS1700-01) DXF data (305 KB)
- YS1000 Series Single loop controller (YS1700-01) DWG data (235 KB)
- YS1000 Series Single loop controller (YS1700-02, YS1500-02, YS1300-02) DXF data (277 KB)
- YS1000 Series Single loop controller (YS1700-02, YS1500-02, YS1300-02) DWG data (203 KB)
Videos
The YSS1000 setting software (hereinafter referred to as the YSS1000) is package software to configure the functions of the YS1000 series (hereinafter referred to as the YS1000) devices. Writing and reading of parameters and user programs of the YS1000, and PID tuning and monitoring of user programs can be performed through the use of communication.
Looking for more information on our people, technology and solutions?
Contact Us