Differential pH and ORP Sensors

The cation differential pH and ORP sensors were designed for difficult applications where conventional sensors are ineffective. These include measurements such as brine solutions to applications as diverse as electrolysis processes and cheese manufacturing.

The problems experienced in these applications most often relate to the reference cell and are the result of either:

  • high diffusion potentials at the reference junction
  • high temperatures (often encountered in applications such as in chlorinated brine processes)
  • and high ground-loop currents.

Which Sensor is right for you?

There are three known different types of differential pH measurements.

Glass-in-Glass Design

The first is a Glass-in-Glass design. This design uses a standard glass electrode as the measuring electrode which generates a potential proportional to the process pH. The second glass electrode serves as the reference electrode and consists of an internal measurement electrode immersed in a stable buffer solution. The internal electrode makes electrochemical contact with the process via a salt bridge chamber (double junction) and generates a standard reference potential. Both glass electrodes have a common potential developed at the third electrode-the solution ground electrode.

This design eliminates the stability problems experienced with conventional references due to process poisoning of the reference element. However, since it utilizes a liquid junction interface with the process, this reference design will still suffer from plugging and coating problems.

Dual Enamel Design

The second is the Dual Enamel design. This is an ion specific technology. The electrode is a 316SS rod coated with enamel. The top enamel functions as the pH measuring site by reacting to Hydrogen Ions. A positive or negative change in the activity of the Hydrogen Ions in the measured fluid results in corresponding change output of the pH enamel. The bottom enamel band measures Sodium Ions and provides the reference voltage. The sodium enamel is a measurement band sensitive to all sodium ions. Increases or reductions in the concentration of sodium (in any formulation) have a corresponding effect on the output of the sodium glass enamel.

A disadvantage to this technology is that the reference voltage of the sodium ion electrode is not definite and predictable as is true in traditional reference electrodes. The reference voltage is determined by and is dependent on the background concentration of sodium ions in the process solution. The stability of the reference voltage is enhanced with higher concentrations of sodium ion. Low conductivity solutions, below 5 mS, lack sufficient sodium and will result in unstable measurements.

Cation-Sensitive Reference Electrode

The third design is a cation-sensitive reference electrode. It is actually a measuring electrode which measures or responds to the concentrations of salts present in the solution. Therefore, as salt concentrations change, so will the reference voltage it generates. Therefore it is process dependent and applications specific.

However, the sensor has NO junction. There is NO path from the process to the internal element; so NO poisoning can occur. Also since there is NO junction, there are NO plugging or coating problems to worry about and there is NO electrolyte depletion problem because there is NO electrolyte.

So when applied correctly differential pH is an exciting new technology and provides a giant step in solving difficult or nearly impossible process pH measurements. 




Measurement Theory Cation Reference Sodium Reference
pH Range 2-14 3-11
ORP Range -1500 to 1500 mV NA
Temperature Range 0 to 105°C (14 to 221°F)

0-140°C (32 to 284°F)

*Reference specificaiton sheet for corrosion resistant curve*

Pressure Range

0 to 10 bar (0 to 145 PSIG) @ 25°C

0 to 5 bar (0 to 72 PSIG) @ 105°C

-1 to 15 bar ( -14.5 to 214 psi)


The FU20-FTS is the newest development in pH sensor technology available from Yokogawa. This sensor combines the measuring technology of our 12 mm differential sensor and the ruggedness of the appreciated wide body FU20 design in one product.

As is common in the market, Yokogawa has used silver/silver chloride reference cells in its products. In a wide range of applications, this solution has proven very effective and remains a cost-effective solution.

The lifetime of the conventional sensors is highly dependent on regularly maintaining pH equipment. Frequent cleaning is required to eliminate reference poisoning. 70-80% of industrial users will fully benefit from using differential sensor technology in their high temperature and pressure applications.


  • No junction
  • No open connection from the process to the inside of the sensor
  • No possibility of poisoning reference element
  • No use of diaphragm hence no issues of plugging or coating of the junction diaphragm
  • No outflow of electrolyte so no depletion issues

The model PH18 differential pH sensor is unique and offers the possibility or maintenance free operation for the correct application.

Construction of the enamel coated probe is based on a rigid steel rod. A blue base enamel is over-laid with two yellow bands of sensitive enamel. A pH sensitive enamel and sodium ion enamel are combined with a rhodium liquid earth electrode and a temperature sensor.

The differential probe measuring principle combines the normal potential generated by the pH enamel with the potential from a sodium membrane. In suitable applications the level of sodium ions creates a stable reference voltage. Hence the measurement can be made without a conventional reference electrode, and drawbacks associated with a liquid junction.

The sensitive membranes are directly bonded to a metallic substrate, which eliminates the need for conventional internal reference elements. This unique construction makes the PH18 independent of the drift which can be caused as reference elements age or become contaminated. When used in a system which is cleaned and/or sterilized with hot water or steam, the membranes produce a signal which has long term stability unrivaled by conventional systems.

The use of this sensor is highly application specific. Your local Yokogawa sales office will be please to advise on the suitability of your application, on receipt of the completed application data sheet. Any and all information received by Yokogawa will be treated in the strictest confidence.

  • Sterilizable pH sensor
  • All enamel construction
  • No reference electrode or junction
  • Easy installation and commissioning
  • No routine maintenance
  • Flexible installation options
  • 140 ºC, 15 bar (284 ºF, 214 psi)

Wet scrubbers are used in utilities, paper mills, and chemical plants to remove sulfur dioxide (SO2) and other pollutants from gas streams. Undesirable pollutants are removed by contacting the gases with an aqueous solution or slurry containing a sorbent. The most common sorbents are lime, Ca(OH)2, and limestone, CaCO3


Sodium chlorate is an inorganic compound with the chemical formula NaClO3. It is a white crystalline powder that is readily soluble in water. It is hygroscopic. It decomposes above 300 °C to release oxygen and leave sodium chloride. Several hundred million tons are produced annually, mainly for applications in bleaching paper.


Continuous technology improvement is ongoing in the pulp & paper industry to obtain the best possible performance. Problems at the wet end (stock preparation) can rarely be corrected downstream. That is why monitoring and controlling pH in pulp stock is critical to the paper making process. Essentially, at every stage in the manufacture of paper, correct pH values play a vital role.

Application Note

pH measurement in brine solutions (for example NaCl solutions as found in electrolysis processes or cheese manufacturing) are difficult and inaccuracy and short sensor life are the key problems in these applications. 


Current trend for increasing mercury awareness throughout the public sector has caused the government to take action. Recently, the Environmental Protection Agency (EPA) has focused their efforts on controlling mercury levels produced in various coal fired power plants. Based on information from several case studies, the EPA developed the Mercury and Air Toxics Standards to cut back mercury emissions. The most popular technology utilized by coal plants to meet the new standards is a scrubber which cleans the off gas from the combustion process. ORP sensors can further monitor the effluent from these scrubbers to ensure optimal mercury emission levels are achieved. By closely monitoring the mercury concentrations in the effluent, plant managers will be able to easily confirm their plants are meeting the EPA's standards.

Media Publication

The different combinations available can make selecting the right pH sensor for your particular needs seem overwhelming. Because pH measurement points within a process vary, a sensor suitable for one application may not work well elsewhere in the plant or provide the same operational life there. This article discusses some important items for determining the optimal sensor for the process.

The first thing to remember is that a complete pH sensor consists of four mandatory elements: temperature electrode; solution ground; pH measuring glass electrode; and reference electrode. These elements either can be individual electrodes or combined into one sensor body. For a better understanding of the different options available and where one option better suits an application than another, you should consider the individual parts independently.

Temperature Electrode and Solution Ground

These are the simplest components of a pH sensor. A temperature electrode is essential to accurately and automatically compensate for temperature variations in the liquid being measured and temperature-dependent effects on the contact potentials in the glass and the reference systems.

The existence of a solution ground also is vital. However, in both cases, knowing the materials utilized isn't that important. Concentrate instead on ensuring the pH measuring glass and reference system used are the best ones for the process conditions.

Applicability of Common pH-Sensitive Glass: Thickness of the glass as well as its composition determine service range.

Figure 1. Applicability of Common pH-Sensitive Glass: Thickness of the glass as well as its composition determine service range.

pH Measuring Glass Electrode

The correct choice of a glass electrode for a particular application requires knowledge of the components of the measuring loop and their significant properties. Selection must consider not only the "pH glass" chemical makeup but also the mechanical design shape. 

Normally, the glass electrode has a bulb-shaped membrane of specific pH glass that is welded to the glass tube. (Alternatives to the standard bulb version of the pH-sensitive glass membranes are available and are better suited for certain process conditions.) The most common bulb constructions are:

Ball shape (shockproof) - universal electrode suitable for most pH applications;

Dome shape (heavy duty) - extremely durable pH membrane (≈1-mm thickness) best suited for measurements in aggressive or abrasive media; and 

Flat shape - used in combined sensors for applications involving a considerable solids' component.

The H+ ions in the liquid being measured interact with the surface (texture) of the pH-sensitive glass to form a stable balance at a specific active H+ concentration. This texture, which provides a high affinity for such a reaction, stems from the specific alkali metal ions used in the composition. Each manufacturer has its own "recipe."

To facilitate the interaction, the pH-sensitive glass membrane must be "conditioned" by allowing it to absorb a film of water or gel. Conditioning is achieved by soaking the electrode in water for a minimum of 24 hours. Most sensors come pre-conditioned and can be used immediately without soaking.

The suitability of an electrode depends on its type of glass membrane. Every manufacturer has its own unique formulation; however, some common types of glass are available:

  • "G" or general-purpose glass is used in processes where the nominal pH value varies around pH 7 and the operating temperature is from -20° to 70°C.
  • "L" or chemical-resistant glass is designed for measurements in alkaline media with process temperatures up to 130°C.
  • "Na" or sodium glass is utilized where good interaction with alkaline (sodium, potassium, calcium and magnesium) ions, rather than H+, is necessary. This glass serves as the reference element in differential sensors or as the measurement sensor for applications that determine/monitor salt concentration.

Figure 1 illustrates the general applicability of G and L glasses. As it shows, the range of any particular glass type also depends on the membrane thickness.

Process conditions greatly influence the chemical resistance of the glass membrane. Elevated temperatures and high salt concentrations (NaCO3 and CaCO3 dissolve the glass) or applications in strongly alkaline liquids generally shorten electrode life. Additives can be included during the manufacturing of the glass to make it more resistant to attack; electrodes suitable for measurements in either strongly acidic or basic liquids can be produced. In aggressive solutions, a heavy duty electrde with a thick dome-shaped glass membrane is preferable.

Reference Electrode

The accuracy of the pH measurement also depends on the properties of the reference electrode, which must be considered to make the correct selection.

A good reference electrode satisfies the following requirements:

  • The probe is insensitive to expected changes in the process liquid composition.
  • According to Nernst's Law, the output voltage of the internal reference probe must be the same as the internal reference probe on the pH measuring glass sensor.
  • The output voltage is stable.

Reference electrodes use a variety of reference systems, flow diaphragms and electrolytes.

Generally, reference electrodes rely on a silver/silver-chloride-potassium chloride (Ag/AgCl-KCI) system. The reference system consists of a silver wire elecrolytically coated with silver chloride (Figure 2). This metal-metal salt combination is dipped in a KCI solution.

Normal Reference System: This relies on a silver wire coated with silver chlorine.

Figure 2. Normal Reference System: This relies on a silver wire coated with silver chlorine.

An alternative construction more suitable for high-temperature applications dips the silver wire into a paste of Ag, AgCl and KCI (Figure 3). A plug of wadding soaked in KCI seals the paste into a tube. This reference assembly simlarly is dipped in a KCI solution.

The electrolyte used in the reference electrode must:

  • be chemically inert and neutral;
  • have a constant activity of ions;
  • be equi-transferent (i.e. the ions of the electrolyte must pass the diaphragm at the same speed); and
  • have a low electrical resistance

The most common electrolytes used in reference electrodes are: 1-M KCI solution (with or without gel); 3.3-M KCI solution; and saturated KCI solution. High viscosity KCI solutions suit high-temperature (>70°C) applications.

The conductivity of the 3.3-M KCl electrolyte solution is roughly three times higher than that of the 1-M KCI electrolyte solution. So, the same reference electrode will have a lower reference impedance. The high conductivity solution is an advantage for some ultrapure water applications that someimes show a high impedance error when using 1-M KCI to 3.3-M KCI solution, you must recalibrate the sensor. Without recalibration, readings will be off by approximately 0.5 pH.

High Temperature Reference System: Such a system uses of a plaste containing silvre, silver chloride and potassium chloride.

Figure 3. High Temperature Reference System: Such a system uses of a plaste containing silvre, silver chloride and potassium chloride.

Junction Issues

Selecting the correct type of junction for a reference electrode also is important because the junction maintains contact between the reference system in the electrode and the process liquid. The choice depends on the process conditions under which the electrode must function. The process liquid must not penetrate the electrode because this could cause poisoning and unstable reference potential.

Figure 4 shows the four available types of junction: two versions of a ceramic, polytetrafluoroethylene (PTFE), and glass-sleeve capillary element. In the first two types, the KCI solution flows slowly into the process. The flow rate depends on the overpressure in the electrode and the process temperature. The electrolyte flow rate rises with increasing temperature.

Non-flowing reference electrodes with a porous PTFE junction suit many dirty liquid applications. The dirt-resistant properties of PTFE will prevent complete fouling of the diaphragm.

However, with very dirty liquids, a glass-sleeve capillary element is preferred because of its larger flow surface. The sleeve easily can be cleaned by first moving the ground ring upwards and then wiping the ground faces.

To provide a stable reference value, tjhe electrolyte in the reference electrode must not be changed by penetration of the process liquid. However, some applications contain ions - e.g., mercury (Hg2+), copper (Cu+), lead (Pb2+) and silver (Ag+) - that will react with the KCI solution if process ingress occurs. The leads to an internal differential that results in errors in pH measurements.

Solving this problem requires separating the KCI solution and the process liquid using a double junction electrolyte, resulting in a reference electrode with a built-in salt bridge.

Processes containing cyanides, bromides, iodides or sulfides are a second example of where selecting the KCI solution is critical. (Many biological process liquids contain sulfur compounds.) In most cases, a black diaphragm indicates the reference electrode lacks a double junction. The black is a deposit of silver sulfide in or directly after the flow diaphragm.

Glass-in-Glass Reference Method

Such deposits can result in:

  • long response of the pH measuring circuit;
  • non-reproducible diffusion voltages and, consequently, drift in the indication;
  • extreme difficulty in calibration (because the formed diffusion voltage can be pH dependent); and
  • increased resistance of the diaphragm (slower measurement).

In processes with pressure variations, the composition of the electrolyte may change as a result of process liquid penetration into the electrode. Such a change may cause a measurement error or even poisoning of the reference system of the electrode. To alleviate this problem, consider an electrode with an integral pressure-compensation system. Various designs exist but ones using a bellows are most common.

In that design, a compressed bellows is positioned within the electrolyte vessel of the electrode. One side of the bellows is connected ot the outside pressure via a ceramic junction. The pressure inside the bellows equals the pressure outside; only the elasticity of the bellows itself causes the over-pressure that results in a flow of electrolyte. When the bellows is fully expanded, the electrolyte is exhausted and refilling is required. The bellows msut be compressed before refilling.

Pressure-compensated systems also can be used in processes with pressures below atmosphere; some designs can allow for 360° mounting capabilities.

Differential Measuring System

All designs of KCI reference electrodes are susceptible to the process coating or plugging the junction, causing an inaccurate or unstable reference voltage that results in pH measurement errors. Over time, depletion of internal electrolyte and poisoning by the process will affect a standard reference. This issue has led to development of an alternative reference design known as a differential reference system. There are two common approaches:

1. Glass-in-glass (Figure 5). This uses a standard glass electrode as the measuring electrode to generate a potential proportional to the process pH. The second glass electrode serves as the reference electrode and consists of an internal measurement electrode immersed in a stable buffer solution. The internal electrode makes electrochemical contact with the process via a salt bridge chamber (double junction) and generates a standard reference potential. Both glass electrodes have a common potential developed at the solution ground electrode.

This design eliminates the stability problems experienced with conventional references due to process poisoning of the reference element. However, because of the liquid junction interface with the process, plugging and coating problems still can occur.

Glass-in-Glass Reference Method

Figure 5. Glass-in-Glass Reference Method: Internal electrode reference electrode makes contact with process via a salt bridge chamber. Note: Reference Electrode (left) and Measuring Electrode (right)

2. Sodium or cation references (Figure 6). Its reference portion is made entirely of a glass that provides a mV output corresponding to the sodium or salt (cation) concetration of the process or solution it's in. Therefore, as the sodium or cation salt concentrations change, so will the reference voltage it generates.

This design avoids many of the challenges encountered in pH applications. There's no liquid junction to be coated or clogged and no path for the process to affect the electrolyte or the internal Ag/AgCl element. This makes the sensor truly maintenance free.

Cation Reference Method

Figure 6. Cation Reference Method: The reference portion in the reference electrode is made completely of glass. Note: Reference Electrode (left) Measuring Electrode (right)

Choose Correctly

Careful consideration of the demands of the specific application undperpin achieving an accurate, reliable measurement with a sensor that provides reasonable life expectancy while minimizing required routine maintenance. If you're frequently calibrating or replacing a pH sensor, then there's a good chance it's not the right combination for the process. Many general-purpose wide body (all-in-one) electrodes will work very well for many applications. However, some services do better if you choose individual electrodes with unique glass design and reference systems not available in an all-in-one design. Use the quick reference charts in Figure 7 as a best practice guide to find the recommended sensor based on the specifics of a particular application.

Selection Guide: These charts highlight factors that suggest a particular type of sensor for a given application.

Figure 7. Selection Guide: These charts highlight factors that suggest a particular type of sensor for a given application.


That is possible but not guaranteed. The 225 mm sensor body is longer, so it has more electrolyte. Often the reference electrode fails because the electrolyte is depleted as it diffuses through the reference junction into the process. With ...
Most pH sensors with a glass membrane cannot be mounted upside down. To absorb the thermal expansion of the internal buffer solution there is always a sizeable air bubble inside the sensor. When the sensor is mounted upside down the reference element...
Yokogawa offers the PH18 sensor. This sensor is nonglass and suitable for regular CIP and SIP cycles.

The lifetime of a pH sensor has a significant impact on the overall annual costs of a pH measuring loop. Optimizing four key factors will decrease these costs and optimize process control and overall plant efficiency.



    This video aims to answer the following: How does a traditional pH reference work and what are it's common problems? How does a sodium pH reference work and what are it's benefits? This webinar was presented February 12th, 2013.

Looking for more information on our people, technology and solutions?

Contact Us