Data Management Solutions for Green Energy Yokogawa provides complete solutions for green energy with a variety of measurement/control instruments PDF

下载 (699 KB)

Yokogawa provides complete solutions for green energy with a variety of measurement/control instruments

Providing Critical Performance Data Measurement in Green Energy for accurate measurement, recording, and monitoring of development, evaluation, and operation.

Facing serious environmental problems for the whole earth, clean energy using solar, wind, geothermal, tidal, etc... to reduce CO2 emissions is an inevitable matter. Renewable energy providers need economical/reliable/efficient solutions. Yokogawa provides a reliable data acquisition system with high accuracy for measurement and control instruments.

Solar Energy Data Recording and Remote Monitoring

Solar Energy Data Recording and Remote MonitoringOverview

MW100 records solar power parameters such as radiance, ambient temperature and before/after electric conversion power data.

Application keys

  • Solar module data (temperature, DC current/voltage) before electric conversion can be recorded via JUXTA (converter)
  • Power data after electric conversion using power meter record by communication (digital data can be more accurate). Some inverters have direct Modbus output.
  • Panel efficiency calculation from measurements in math channels

Benefits of using MW100

  • On-demand data recording/monitoring
    Data recorded simultaneously to CF and network (OPC).
  • Continuous data recording
    Even after power failure recovery failure, MW100 continues to record data.
  • Sum of power data display
    Displays the integral value for each channel
  • Operates in harsh environment (-20 to 60 C)

Before electric conversion 
(DC power measurement) 
Module data: Current, voltage, temperature

After electric conversion 
(AC power measurement) Power meter data

Environment data 
Radiance, ambient temperature

Wind Energy Data Recording and Monitoring

Wind Energy Data Recording and MonitoringOverview

Power generator parameters and weather environment data at wind-farms can be recorded. Remote access allows users to monitor all data for operational status.

Application keys

  • Strain gauge sensor at slip-ring and communications across rotating interface.
  • Environmental tolerances (vibration and operational temperatures)
  • Reliable data logging with local storage and ability to feed real-time data to SCADA package
  • Event based recording with reporting options

Benefits

  • Remote monitoring via WAN
  • On site continuous data logging for extended periods
  • Recovery of data logging after power failure
  • Critical diagnostics alarm function
  • E-mail notification by an alarm on math and I/O channels helps users keep track of system for maintenance etc.

Geothermal Electrical Generation Control and Monitoring

Geothermal Electrical Generation Control and MonitoringOverview

Hot rocks and water come together in select areas to produce renewable energy. CX2000s networked to US/UP controllers provide primary control with distributed backup control for steam turbines.

Application keys

  • Fail safe operation of control valves using CX2000 as primary controller with US1000 controllers as backup
  • Distributed Control and Data Acquisition

Benefits of using CX2000 and US1000's

  • Networking capability of CX2000 to US1000 for accurate data transfer
  • Internal logic capabilities of CX2000
  • System Fault to Fail relay for transfer of control to US1000's
  • Data logging capability of CX2000 to CF card
  • Ability of US1000's to accept pass through control output and switch to local control output as backup control strategy

Hydrogen Fuel Cell Monitoring

Hydrogen Fuel Cell MonitoringOverview

Industrial hydrogen fuel cells can be used to produce hydrogen and oxygen from distilled water as well as run in reverse to generate electricity. Fuel cells can also be used in conjunction with intermittent energy sources like solar or wind to provide regulated continuous energy output.

Application keys

  • Scalable voltage and temperature measurement and monitoring (stacked cells)
  • High levels of noise rejection and channel to channel isolation
  • 100ms collection rate for channel data
  • Ability to communicate real-time data via Modbus TCP

Benefits of using MW100

  • Options for communicating with control systems
    Modbus TCP, Modbus RTU, Ethernet IP, DNP 3
  • Superior noise rejection compared to competitor models
  • High density of isolated inputs per MW100 rack
  • Event based data logging for diagnostic purposes

Energy Monitoring for Manufacturing Lines

Energy Monitoring for Manufacturing LinesOverview

MW100 and PR300 system measures and quantifies the electrical energy consumption for each assembly line

Application keys

  • Scalable from a single node to 100's of locations
  • Cost effective Individual electrical monitoring for many areas
  • Demand monitoring with alarm output for load shedding

Benefits of using MW100/PR300

  • On demand data recording/monitoring with easy access
  • Easy connection with MW100/PR300
  • Available with serial or Ethernet communications
  • Remote monitoring from any PC with internet connection

MW100 Web-Enabled Data Acquisition/Stand-Alone Data Logging System

  • Green Energy ProductsMax. 10 ms measurement interval and mixing of three different measurement intervals
  • Acquire up to 360 channels in one system
  • High-withstand-voltage: 3700 Vrms, 600 Vrms/V DC
  • Standard 10/100 Base T Ethernet with MODBUS TCP, EtherNet/IP, WITS and DNP3
  • Wide range of operation temperatures: -20 to 60°C

DX1000/DX2000 DAQSTATION DXAdvanced

  • Max. 25ms measurement interval and Max. 48 Channels
  • Custom display and multi batch function
  • Dust- and splash-proof front panel (IP65, Nema4 compliant)
  • Standard Ethernet interface. RS485/RS232 interface.
  • Networking functions: Web server, FTP data transfer, and E-mail messaging
  • MODBUS, EtherNet/IP, PROFIBUS-DP protocol support

CX1000/CX2000 Control/Measurement Station

  • Max. 6 control loops and 20 measurement channels
  • Program control function (Max. 30 program patterns)
  • Support for up to 16 external loop controllers
  • Dust and splash-proof front panel (IP65, Nema4 compliant)
  • Standard Ethernet interface. RS485/RS232 interface.
  • Networking functions: Web server, FTP data transfer, and E-mail messaging

MV1000/MV2000 Portable Paperless Recorder

  • Max. 25ms measurement interval and Max. 48 Channels (MV2000) 24 channels (MV1000)
  • Insulated between channels,1000 VAC withstand voltage.
  • The simplified interface lets you start measuring sooner
  • Standard Ethernet communication with FTP data transfer and e-mail notification
  • MODBUS TCP/RTU protocol support

PR300 Power and Energy Meter

  • Measurement functions for Wh, W, PF, Hz, V, A etc as well as transducer function
  • Three desired measurement items display
  • High accuracy measurement: Voltage, Current: 0.25 % of F.S.
  • Ethernet and RS485 communication
    Demand measurement and demand alarm output

UT52A/55A Digital Indicating Controllers

  • Universal input and Max. 50 ms control cycle
  • Ladder sequence control and fuzzy logic control
  • Active color LCD display
  • Ethernet, RS485 and PROFIBUS DP* communication
    *PROFIBUS DP coming soon

DAQSTATION and DXAdvanced are registered trademark of Yokogawa Electric Corporation.
Ethernet is a registered trademark of Xerox Corporation.
Other company names and product names appearing in this document are registered trademarks or trademarks of their respective holders.

Subject to change without notice.
All Rights Reserved, Copyright© 2009, Yokogawa Electric Corporation.

行业

相关产品&解决方案

Button Operated DX1000/DX2000

The Daqstation DX1000/2000 series is a data acquisition system with display. Its HMI supports custom graphics for industry applications, audit trail and advanced security conforming to FDA 21CFR Part 11.

Button Operated MV1000/MV2000

The MVAdvanced portable battery powered paperless recorders are high performance and easy to use test instruments that handle a wide range of measurements.

Data Acquisition with PID Control CX2000

CX defines the next generation in process control by fusing recording, control and networking into a single, compact product.

Standalone MW100

For industrial DAQ applications, the MW100 offers scalability and can operate either standalone or integrated as a node within a larger automated system including SCADA or DCS.

中级UT55A/UT52A

UT55AUT52A温度控制器采用易读的14段大型彩色LCD显示屏,并配以导航键,从而极大地提升了监视和操作性能。标配梯形图顺控功能。控制器安装深度较短,有助于节省仪表面板的空间。UT55A/UT52A还支持以太网通信等开放网络。

图表记录仪

条形图表记录仪将电气或机械信号趋势记录在纸上。 横河提供的图表记录仪具有世界一流的性能和可靠性。

数据记录仪

数据记录仪记载较长时间内监视、测试、分析资产健康状况和性能的传感器数据。横河数据记录仪以其卓越的可靠性、抗噪声性、测量精度和易用性得到业界的认可。

面板式记录仪

面板式记录仪将数据采集和显示站完全集成,具有安全的内置数据存储和网络连接。面板式的解决方案将数据采集设备集成到控制面板中,并符合NEMA标准。

面板指示器

UM33A可以提供多达9个报警输出和输入的校正功能(PV偏移、折线近似、折线偏移)。另外,也可选用24 V DC传感器电源。

×

Have Questions?

Contact a Yokogawa Expert to learn how we can help you solve your challenges.

置顶
WeChat QR Code
横河电机(中国)有限公司
WeChat Recruiting QR Code
横河电机中国招聘