EJX310B无线绝对压力变送器

高性能无线压力变送器EJX310B具有单晶硅谐振传感器,适用于测量液体、气体或蒸气的流量以及液位、密度和压力。此变送器不仅能够传输过程变量,而且可以使用无线信号设置参数。变送器使用内部自带电池,因为不需要硬件布线可以大幅降低安装成本。该通信协议兼容ISA100.11a协议规格

详细介绍

  • 电池寿命长
    使用两个大容量锂亚硫酰氯电池,超低耗电设计为无线运行提供更长的电池寿命。
  • 安全可靠的无线网络连接
    设备之间的红外通信用于无线网络配置和参数设置。
  • 快速更新时间
    可将无线发布测量过程值的时间设定为0.5秒~60分钟。

参考

概述:

ISA100 wireless temperature and pressure transmitters.

概述:
  • Daily manual reading of pressure and temperature gauges with report by phone.
  • The customer wants to change measurement from off-line to on-line.
  • Cabling for wired transmitters in huge plants (up to 300 meters long) is expensive.
行业:
概述:
  • Wireless pressure and temperature monitoring.
  • Repeater was set under the gateway.
  • The maximum distance between the repeater and transmitters is approximately 500m.
行业:
概述:

ISA100 wireless temperature and pressure transmitters with orifice plates allow:

  • No cabling installations or maintenance.
  • Small amount of hardware and simple equipment implementation means minimizing potential vandalism.
行业:
概述:

ISA100 Wireless Monitoring  

  • Gateway x1, Temperature Transmitter (YTA) x3, Pressure Transmitter (EJX) x1, Repeater x1

Gateway is installed at control room and 3m height extended antenna is set.

行业:
概述:
  • Temperature Transmitter (YTA) and Pressure Transmitter (EJX) are installed at each monitoring point.
  • Repeater is installed on high position.
行业:
概述:
  • Oil level measurement of diesel tanks that feed fuel to their diesel generator's which are at three locations and 400 meters apart from each other.
  • Also to measure level , pressure and flow to and from their main storage yard.
行业:
概述:

ISA100 Wireless Temperature and Pressure Transmitters

  • Gateway x1, Temperature Transmitter (YTA) x1, Pressure Transmitter (EJX) x1

High quality wireless communication confirmed

  • Packet Error Rate (PER) is 0 to 2.5%/ 5 days
概述:

The use of wireless technology in industrial automation systems offers a number of potential benefits, from the obvious cost reduction brought about by the elimination of wiring to the availability of better plant information, improved productivity and better asset management. However, its practical implementation faces a number of challenges: not least the present lack of a universally agreed standard. This article looks at some of these challenges and presents the approach being taken by Yokogawa.

概述:

In recent years, more field wireless devices have been used in hazardous areas. Meanwhile, in plants that are usually recognized as hazardous areas, there are numerous metallic tanks and pipes that easily shield or reflect radio waves, as discussed later, thus resulting in a poor environment for wireless communication.

概述:

The innovation of wireless technology increases the use of wireless communication in the industry. The introduction of wireless communication to plants, however, requires strict features such as robustness, real-time responsiveness, and low power consumption. This has restricted the use of wireless communication to limited applications such as data logging and device status monitoring that does not require strict real-time responsiveness and data arrival reliability in communication.

下载

想要了解更多的信息,技术&解决方案?

联系我们

置顶
WeChat QR Code
横河电机(中国)有限公司