Name: Program Controller UP35A/UP32A
Brand: Yokogawa
SKU: up35a-up32a

Software
FAQ
Selection Guide
Brochures
Instruction Manuels
Général Spécifications
Support technique

The UP35A is a program controller with available 4 patterns and 40 segments (max.) and multi-channel contact I/O. It also includes a ladder sequence function. The UP32A is a compact program controller with up to 4 patterns and 40 segments available. It also includes a ladder sequence function.

UTAdvanced

Reliability

CSA C22.2 61010-/1
UL61010-1

> Important notice: UTAdvanced UT52A, UP35A parts of Suffix code

Overview

Advanced Control

Ladder sequence control
Fuzzy logic control

Simplicity

Easy-to-read, 14-segment large color LCD display
Scrolling text feature for parameters
Navigation guide & navigation keys
Programmable funciton keys
User settable default values
Multiple language support (English, Spanish, French, German)
Compact design of 65-mm depth

Networking

Ethernet (Modbus/TCP)
RS-485 (Modbus/RTU, peer to peer, coordinated, PC-Link)
Open network (PROFIBUS-DP, CC-Link, DeviceNet)

Reliability

3 year warranty*1
RoHS/WEEE
NEMA4*2/IP66 front panel

*1: The 3 year warranty extendes 36 months after shipment from our factory.
*2: Hose-down test only

Application Software

LL50A parameters setting software with the ladder program building function (sold seperately)

Reliability
CSA C22.2 61010-/1
UL61010-1

【Support Information】List of RoHS

This is a list of recorder and controller products that support the RoHS (2011/65/EU) directive.

Voir plus
【Support Information】UTAdvanced Series Parameter Maps and Lists

UTAdvanced series Parameter map list for each model can be downloaded.
Please use it to manage and save the set parameters. Also please use it as a reference for the key operation at that time.

Voir plus
【Support Information】New Legislative Framework (NLF) Conforming Products

This is a list of recorder and controller products that support the New Legislative Framework (NLF.)

Voir plus

Références

Control of Heat Treating Furnace Operation

Notes Applicatives

Controlling a pharmaceutical sterilizer/pasteurizer

Questions fréquentes

At the end of UP32A/UP35A/UP55A programs, does the PIDNo. change when local is set (JC=LOCAL)?

(ns-faq-ut-2079-spec)

Questions fréquentes

How do I set up output of alarm output 1 from the UP32A/UP35A/UP55A AL1 terminals (relay contact output)?

(ns-faq-ut-2082-setting)

Questions fréquentes

I want to check the program controller patterns from the main unit.

(ns-faq-ut-2122-setting)

Questions fréquentes

With a program controller, if you don't turn ON the wait function on/off 1–5 setting (parameter WT.SW1–WT.SW5), does the wait function not operate?

(ns-faq-ut-2127-spec)

Questions fréquentes

With program controllers, can you do auto-tuning while programs are running?

(ns-faq-ut-2128-setting)

Questions fréquentes

With program controllers, can you change the SP while programs are running?

(ns-faq-ut-2133-setting)

Questions fréquentes

On a program controller, can I do contact output when an operation parameter ends?

(ns-faq-ut-2134-setting)

Questions fréquentes

While a program is running, I want to judge advancing to the next segment with an operator. How can I do that?

(ns-faq-ut-2142-setting)

Questions fréquentes

I use the UP under batch control. I want to display a message on the front panel of the UP after batch control stops.

(ns-faq-ut-2169-setting)

Questions fréquentes

How can I delete a segment from a UP program pattern through CC-Link communication?

(ns-faq-ut-2189-setting)

Questions fréquentes

I want to write program patterns to the UP Program Controller via communications, but can I do that while the UP is running a program?

(ns-faq-ut-2201-connect)

Questions fréquentes

Can I use DO to transmit the pattern number currently used on the UP to an external device?

(ns-faq-ut-2216-setting)

Questions fréquentes

Can I set control for power fail recovery to MAN?

(ns-faq-ut-2117-setting)

Questions fréquentes

I want to wire a 2-wire transmitter and a 24 VDC sensor power supply.

(ns-faq-ut-2119-connect)

Questions fréquentes

Can I convert GREEN series (UT300/UT400/UT500/UP500) parameters for use with the UTAdvanced series?

(ns-faq-ut-2060-soft)

Questions fréquentes

Can I use square root extraction on measured input?

(ns-faq-ut-2183-spec)

Questions fréquentes

I want to convert my old controller (GREEN series) parameter data for the UTAdvanced series. Is there a program for that?

(ns-faq-ut-2222-soft)

Questions fréquentes

I used the parameter conversion tool to convert GREEN series data for the UTA series. I can’t add the CC-Link communication option code to the converted data.

(ns-faq-ut-2230-spec)

Questions fréquentes

Can you tell me the procedure for assignment when the heater break alarm output option (suffix code /HA) is installed?

(ns-faq-ut-2015-setting)

Questions fréquentes

Can I set up 4 alarm relay outputs?

(ns-faq-ut-2016-setting)

Questions fréquentes

With the types that have an Ethernet communication function, even if I set the Ethernet setting switch to "1," it reverts to "0."

(ns-faq-ut-2022-connect)

Questions fréquentes

What does the Ethernet 2 connections max mean?

(ns-faq-ut-2023-spec)

Questions fréquentes

After changing the UT's SP values from the MELSEC via CC-Link, when I change the SP value on the UT main unit, I can't change to the same value as before from the MELSEC.

(ns-faq-ut-2026-connect)

Questions fréquentes

With CC-Link, I write 1 to RY48 and change to MAN, and then change to AUTO using the main unit A/M key. Can you tell me how to change back to MAN again via CC-Link?

(ns-faq-ut-2027-connect)

Questions fréquentes

What profile number is used when using CC-Link on only 1 unit?

(ns-faq-ut-2028-connect)

Questions fréquentes

Can I switch between RUN and STOP via CC-Link?

(ns-faq-ut-2029-connect)

Questions fréquentes

To use valve opening in a position proportional type UT ladder program, which register should I reference?

(ns-faq-ut-2040-program)

Questions fréquentes

Can I output an alarm (close the alarm terminal) on a power failure?

(ns-faq-ut-2056-setting)

Questions fréquentes

Is calibration of position still required if the position proportional type feedback input is current?

(ns-faq-ut-2059-spec)

Questions fréquentes

Can I change the temperature controller profile information for CC-Link communication?

(ns-faq-ut-2068-spec)

Questions fréquentes

What is the Modbus master function that is added when CC-Link communication is installed?

(ns-faq-ut-2069-spec)

Questions fréquentes

What happens to transmission output when an input OVER occurs at 4–20 mA input (PV: 4–20 mA)?

(ns-faq-ut-2081-setting)

Questions fréquentes

Do you have a 48 x 96 sized controller that supports CC-Link?

(ns-faq-ut-2091-select)

Questions fréquentes

I connect multiple UTs as CC-Link slaves. How should I assign PLC CPU registers?

(ns-faq-ut-2092-connect)

Questions fréquentes

Is there a C contact with alarm contact output?

(ns-faq-ut-2112-spec)

Questions fréquentes

Can you describe the register symbols in the profiles for open network communication?

(ns-faq-ut-2115-term)

Questions fréquentes

Can a UT100 series instrument be connected downstream of a UTAdvanced series with CC-Link communications?

(ns-faq-ut-2125-spec)

Questions fréquentes

Can I connect transmission output (current output) to a voltage input meter?

(ns-faq-ut-2135-setting)

Questions fréquentes

I'm writing PID settings via CC-Link communication, but when I send 100 to proportional band P, 10.0 appears on the main unit.

(ns-faq-ut-2138-setting)

Questions fréquentes

b.out was displayed on the controller's PV display. What does that mean?

(ns-faq-ut-2148-spec)

Questions fréquentes

Can I read a valve opening value via communication on a position proportional controller?

(ns-faq-ut-2159-spec)

Questions fréquentes

Which station type should I select for the UTAdvanced series for CC-Link communication: Remote I/O, Remote Device, or Intelligent Device?

(ns-faq-ut-2164-setting)

Questions fréquentes

I purchased a unit with CC-Link communication. I'm setting up the parameters for CC-Link, and there are 2 communication speed settings, BR and BPS. Which setting should I use?

(ns-faq-ut-2166-setting)

Questions fréquentes

Sometimes data can't be written to the "1.SP" register via CC-Link communication. What causes this?

(ns-faq-ut-2178-spec)

Questions fréquentes

Sometimes with CC-Link communication it stops writing data. What should I do?

(ns-faq-ut-2180-spec)

Questions fréquentes

What happens if I write data outside the specified range via CC-Link communication?

(ns-faq-ut-2181-spec)

Questions fréquentes

Is there support for the "CC-Link IE" standard?

(ns-faq-ut-2182-spec)

Questions fréquentes

I want to perform autotuning via communication on a UT with CC-Link communication. Should I turn AT_L1 which is assigned to the OUT area in the profile to ON (=write 1)?

(ns-faq-ut-2175-program)

Questions fréquentes

Downstream from a UT with CC-Link communication (the Modbus master), the power to a controller connected via RS485 communication (the Modbus slave) went out. After the power to the controller was restored, communication did not restart. What should I do?

(ns-faq-ut-2179-spec)

Questions fréquentes

I have the /LP option and I’m wiring a 2 wire transmitter power supply. How can I input a simulated current signal?

(ns-faq-ut-2239-connect)

Questions fréquentes

What is the model of the current transformer for heater current measurement used by UTAdvanced?

(ns-faq-ut-2248-spec)

Questions fréquentes

How can I display the currently used PID no. on the operation screen?

(ns-faq-ut-2249-setting)

Questions fréquentes

Even when I turn ON the power, nothing appears on the UT display.

(ns-faq-ut-2013-setting)

Questions fréquentes

I can't find a parameter I want to set.

(ns-faq-ut-2001-setting)

Questions fréquentes

I set up a difference lower limit alarm, but no alarm is output.

(ns-faq-ut-2017-setting)

Questions fréquentes

With the UTAdvanced ladder program function, can I use constants and other parameters in basic math functions?

(ns-faq-ut-2024-connect)

Questions fréquentes

Are communications with the FA-M3 possible?

(ns-faq-ut-2021-connect)

Questions fréquentes

Can I use an RS-485 communication program written for the GREEN series (UT300/UT400/UT500/UP300/UP500/UM300) on a UT-Advanced series instrument?

(ns-faq-ut-2025-connect)

Questions fréquentes

When using the LL50A to create ladder programs, which ladder program edit mode should I use: "input ladder calculation," "output ladder calculation," or "user ladder"?

(ns-faq-ut-2030-program)

Questions fréquentes

I'm creating ladder programs on the LL50A. I want to set input computed results to R.SP, but I see lots of digits are displayed after the decimal point of the data on the ladder monitor. Can I reduce the number of digits displayed after the decimal point?

(ns-faq-ut-2031-program)

Questions fréquentes

Can I use analog input in computations?

(ns-faq-ut-2032-program)

Questions fréquentes

Can I rewrite constants used in ladder programs via communication?

(ns-faq-ut-2033-program)

Questions fréquentes

Can I disable ladder programs that I used?

(ns-faq-ut-2034-setting)

Questions fréquentes

Can I detect when the power is turned ON?

(ns-faq-ut-2035-program)

Questions fréquentes

My LL50A ladder program monitor does not start.

(ns-faq-ut-2036-program)

Questions fréquentes

A ladder program that I wrote doesn't work properly.

(ns-faq-ut-2037-program)

Questions fréquentes

My ladder program's comparison commands don't work properly.

(ns-faq-ut-2038-program)

Questions fréquentes

When using contact input in ladder programs, is it necessary to turn OFF the contact function assigned to the setup parameters?

(ns-faq-ut-2039-program)

Questions fréquentes

Can you tell me how to wire and set up waste liquid pH control?

(ns-faq-ut-2041-setting)

Questions fréquentes

I'm controlling the temperature of an electric furnace using a thyristor. How should I wire and configure this?

(ns-faq-ut-2042-setting)

Questions fréquentes

I'm controlling the temperature of an electric furnace using solid state relays. How should I wire and configure this?

(ns-faq-ut-2043-setting)

Questions fréquentes

Can you tell me how to wire and set up flow control using an inverter?

(ns-faq-ut-2044-setting)

Questions fréquentes

I'm controlling tank level ON/OFF. How should I wire and configure this?

(ns-faq-ut-2045-setting)

Questions fréquentes

I'm doing proportional control of tank level. How should I wire and configure this?

(ns-faq-ut-2046-setting)

Questions fréquentes

I'm controlling tank pressure. How should I wire and configure this?

(ns-faq-ut-2047-setting)

Questions fréquentes

With the LL50A and UTAdvanced, can I perform RS-485 communications without a dedicated cable?

(ns-faq-ut-2051-connect)

Questions fréquentes

How can I display parameters that aren't displayed in the LL50A parameter setting software?

(ns-faq-ut-2052-soft)

Questions fréquentes

Can I acquire trend data on the LL50A?

(ns-faq-ut-2053-soft)

Questions fréquentes

Can I switch scaling using contact input?

(ns-faq-ut-2054-program)

Questions fréquentes

What is the resolution of control output (4–20 mADC)?

(ns-faq-ut-2055-spec)

Questions fréquentes

I'm controlling tank temperature. How should I wire and configure this?

(ns-faq-ut-2048-setting)

Questions fréquentes

I'm controlling furnace temperature with a motorized valve. How should I wire and configure this?

(ns-faq-ut-2049-setting)

Questions fréquentes

I'm controlling temperature with a heat exchanger. How should I wire and configure this?

(ns-faq-ut-2050-setting)

Questions fréquentes

Are all COM terminals for contact input connected internally?

(ns-faq-ut-2061-spec)

Questions fréquentes

Can I reverse the 4–20 mA control output and change to a 20–4 mA signal?

(ns-faq-ut-2063-spec)

Questions fréquentes

How can I enter initial settings?

(ns-faq-ut-2064-setting)

Questions fréquentes

OVER was displayed on the PV (measured value) display. How will the control output operate in this case?

(ns-faq-ut-2070-spec)

Questions fréquentes

I initialized the controller, but no control output value is output.

(ns-faq-ut-2074-setting)

Questions fréquentes

B.OUT was displayed on the PV (measured value) display. What could be the cause of this?

(ns-faq-ut-2077-connect)

Questions fréquentes

There are differences between PV display values and the displays of other measuring instruments. Can I correct these?

(ns-faq-ut-2078-spec)

Questions fréquentes

An error occurs with position-proportional type automatic valve position adjustment (V.AT).

(ns-faq-ut-2083-setting)

Questions fréquentes

Is a terminal cover included?

(ns-faq-ut-2088-select)

Questions fréquentes

Can I set the PV display to -100 with 20 mA input, and to 0 with 4 mA input?

(ns-faq-ut-2089-setting)

Questions fréquentes

Can I switch the temperature units between°C and °F?

(ns-faq-ut-2087-spec)

Questions fréquentes

I'm doing temperature control. I did PID tuning, but the overshoots are still large and I want to suppress them. Is there a good way to do this?

(ns-faq-ut-2104-setting)

Questions fréquentes

I'm replacing my GREEN series with the UTAdvanced series. Is there anything I need to be careful of in terms of wiring?

(ns-faq-ut-2108-connect)

Questions fréquentes

Does the alarm function work when operation is stopped (STOP)?

(ns-faq-ut-2110-spec)

Questions fréquentes

What is the alarm standby function?

(ns-faq-ut-2111-spec)

Questions fréquentes

Are the control and alarm hysteresis values set as percentages?

(ns-faq-ut-2113-setting)

Questions fréquentes

I'm using the UP35A and UP55A. Are PV and local event hysteresis values set with percentages?

(ns-faq-ut-2114-setting)

Questions fréquentes

How can I check the RS485 communication status?

(ns-faq-ut-2116-connect)

Questions fréquentes

I want to set the PID, output limiter, and hysteresis for each SP number.

(ns-faq-ut-2120-setting)

Questions fréquentes

What is the minimum hold time that contact input can detect?

(ns-faq-ut-2121-spec)

Questions fréquentes

Why are PID parameters set with relay output?

(ns-faq-ut-2123-spec)

Questions fréquentes

Does the UTAdvanced series support CCC and GB standards? Can it be used in China?

(ns-faq-ut-2124-spec)

Questions fréquentes

Can the alarm operation be disabled during operation stop (STOP) or manual operation (MAN)?

(ns-faq-ut-2129-setting)

Questions fréquentes

I want to stop the lamp indicator or action for unused alarms.

(ns-faq-ut-2136-setting)

Questions fréquentes

Can I assign heater disconnection alarm 1 to alarm 1 output (terminal no. 108-109)?

(ns-faq-ut-2137-setting)

Questions fréquentes

Is there a limit on the number of times you can write to the D register via communication?

(ns-faq-ut-2140-spec)

Questions fréquentes

What should I do if DI input is not accepted on relay contacts?

(ns-faq-ut-2141-spec)

Questions fréquentes

Can I remove the output limit value restriction during manual operation?

(ns-faq-ut-2143-setting)

Questions fréquentes

I'm controlling temperature by using voltage pulse output to operate a heater with an SSR, but I can't stop the hunting. I already performed auto-tuning.

(ns-faq-ut-2146-setting)

Questions fréquentes

Valve calibration parameters don't appear on position proportional controllers.

(ns-faq-ut-2147-setting)

Questions fréquentes

I'm controlling pressure. Are there PID reference values?

(ns-faq-ut-2153-setting)

Questions fréquentes

I'm controlling flow. Are there PID reference values?

(ns-faq-ut-2154-setting)

Questions fréquentes

I'm controlling flue levels. Are there PID reference values?

(ns-faq-ut-2155-setting)

Questions fréquentes

With 1-5 VDC input, can I make the PV display 0.00 to -10.00 kPa?

(ns-faq-ut-2156-setting)

Questions fréquentes

I want to create a ladder program that writes output tracking values via communication.

(ns-faq-ut-2158-setting)

Questions fréquentes

I'm using a thermocouple for the input, but "b.out" appears on the PV display. What should I check first?

(ns-faq-ut-2160-other)

Questions fréquentes

Can you tell me the inrush current value of the UTA series of instrument power?

(ns-faq-ut-2162-spec)

Questions fréquentes

Can you tell me how to get the measurement accuracy when measuring 0 to 1000°C with a type K thermocouple? I selected input type K2 (-270.0 to 1000.0).

(ns-faq-ut-2163-spec)

Questions fréquentes

What is the measured current during RTD input?

(ns-faq-ut-2167-spec)

Questions fréquentes

I'm pressing SET/ENTER on the front panel keys but I can't change the SP value.

(ns-faq-ut-2171-setting)

Questions fréquentes

I set the UTA output to 10-segment linearizer approximation. Can the resulting output values be read via communication?

(ns-faq-ut-2177-spec)

Questions fréquentes

Can I make it display the alarm type when an alarm occurs?

(ns-faq-ut-2184-spec)

Questions fréquentes

What is the MR (manual reset) function?

(ns-faq-ut-2185-spec)

Questions fréquentes

How to connect one UT with CC-Link communication to another downstream UT via RS485. The RS485 communication terminal of the UT with CC-Link communication is a 2-wire system, and that of the other UT is a 4-wire system.

(ns-faq-ut-2187-connect)

Questions fréquentes

I want to control the temperature of 3 zones. How should I configure it?

(ns-faq-ut-2191-select)

Questions fréquentes

I purchased a general type of controller. Can this control cooling?

(ns-faq-ut-2194-other)

Questions fréquentes

I want to check the suffix code but I can't see the name plate. Is there another way to check it?

(ns-faq-ut-2195-setting)

Questions fréquentes

After converting the controller manual output value to a number like the SP, can I finalize it with the ENT key?

(ns-faq-ut-2196-setting)

Questions fréquentes

I'm using the Pt100 sensor. The PV input type IN parameters include PT1, PT2, and PT3, but which should I select?

(ns-faq-ut-2197-setting)

Questions fréquentes

Can I apply a 24 VDC voltage to a contact input?

(ns-faq-ut-2198-spec)

Questions fréquentes

I want to output the results of calculations by ladder programs with 4-20 mA on the OUT output terminal, but nothing happens.

(ns-faq-ut-2207-program)

Questions fréquentes

I want to output the results of calculations by ladder programs with 4-20 mA on the RET output terminal, but nothing happens.

(ns-faq-ut-2208-program)

Questions fréquentes

I want to output the results of calculations by ladder programs with 4-20 mA on the OUT2 output terminal, but nothing happens.

(ns-faq-ut-2209-program)

Questions fréquentes

I want to contol pressure and temperature with a single pattern using the UP and UT.

(ns-faq-ut-2213-spec)

Questions fréquentes

When installing the UTAdvanced series, what is the depth in millimeters from the surface of the panel?

(ns-faq-ut-2214-spec)

Questions fréquentes

Can I use DO to transmit the SP number currently used on the UT to an external device?

(ns-faq-ut-2215-setting)

Questions fréquentes

Can I switch heating and cooling control?

(ns-faq-ut-2218-spec)

Questions fréquentes

Can I connect multiple instruments such as power controllers to a controller's analog current output?

(ns-faq-ut-2219-connect)

Questions fréquentes

Do you sell terminal covers?

(ns-faq-ut-2233-other)

Questions fréquentes

Can I set it for 1 shot-only event display and contact output ON when an alarm activates?

(ns-faq-ut-2241-setting)

Questions fréquentes

Is it possible to connect multiple contact inputs to a single relay contact?

(ns-faq-ut-2243-connect)

Questions fréquentes

Can I choose the color of the UTAdvanced terminal cover?

(ns-faq-ut-2246-spec)

Questions fréquentes

Is the current transformer for heater current measurement that is used by UTAdvanced made by Yokogawa Electric?

(ns-faq-ut-2247-other)

Questions fréquentes

Can you tell me where to download catalogs, specifications, user manuals, technical information, drawings, software, and CAD data?

(ns-faq-gxgp-097-other)

Brochures

UTAdvanced Digital Indicating Controller (11.3 MB)
Digital Indicating Controller UTAdvanced for Customization (2.1 MB)
SMARTDAC+ Aerospace Heat Treatment (Option /AH) (886 KB)
SMARTDAC+ Automotive Industry Heat Treatment (Option /AH) (990 KB)

Instruction Manuels

Precautions on the Use of the UTAdvanced Series (286 KB)
UP35A/UP32A Program Controller Operation Guide (for Standard code model) (5.6 MB)
UP35A Program Controller Operation Guide (for Detailed code model) (5.3 MB)
UP35A/UP32A Program Controller User's Manual (13.6 MB)
Control of Pollution Caused by the Product (152 KB)

Général Spécifications

Logiciel

Technique Information

Dessin

UTAdvanced Model: UTAP002 Terminal Cover for 48 x 96 mm (145 KB)
Model UP32A Program Controller (283 KB)
Model UP35A Program Controller (UP35A-NNN-xx-xx/x) (258 KB)
Model UP35A Program Controller (281 KB)

Rechercher plus d'informations sur nos compétences, technologies et solutions

Contactez-nous

Program Controller UP35A/UP32A

Overview

Overview

Advanced Control

Simplicity

Networking

Reliability

Application Software

Details

【Support Information】List of RoHS

【Support Information】UTAdvanced Series Parameter Maps and Lists

【Support Information】New Legislative Framework (NLF) Conforming Products

Ressources

Downloads

Brochures

Instruction Manuels

Général Spécifications

Logiciel

Technique Information

Dessin