Advanced Application UT75A

The UT75A temperature controllers employ an easy-to-read, 14-segment large color LCD display, along with navigation keys, thus greatly increasing the monitoring and operating capabilities. A ladder sequence function is included as standard. The short depth of the controller helps save instrument panel space. The UT75A also support open networks such as Ethernet communication.

UT75A Temperature Controller Features

  • Comes with a 2-loop control function
  • Ladder sequence capacity up to 1,000 steps
  • Includes custom ladder function
  • Offers 20 sets of target setpoints
  • Supports open networks (CC-Link, PROFIBUS-DP, DeviceNet)

Details

Product Details

UT75A Temperature Controller

ut75a-00.png

The Enhanced Peformance, Usability, and Flexibility Meet the Advanced Control Needs in a Wide Variety of Applications

Enhancing Productivity by Managing a Variety of Recipes

Switching between 20 Recipes

  • Increasing yield by managing a variety of recipes
  • Increasing quality in combination with 16 PID values

Increasing yield by managing a variety of recipes

Program pattern operation

  • Program pattern consists of up to 20 segments
  • 2-loop program pattern can be operated

2-loop program pattern can be operated

Easy to switch between recipes with a PLC

  • Since CC-Link, Profibus, and DeviceNet are supported, it is easy to link to a PLC that manages recipes

Reducing Engineering Costs and Peripheral Devices

Easy to switch between recipes with a PLC

Simplifying ladder programs

  • Multi-line ladder programs such as numerical calculation can be turned into a single line using a custom ladder instruction.
  • This simplifies the ladder programs and facilitates easy engineering and maintenance.
  • Created custom ladder instructions can be saved in a file.
  • Custom ladder instructions saved in a file can be used by another UT75A temperature controller.

 

 

ut75a-04.png

External calculators and sequence control circuits (relay, timer, etc.) can be reduced

  • Complex I/O offset calculation and alarm sequence control can be accomplished using a ladder program
  • Engineering costs such as wiring and initial setup can be reduced significantly
  • A sequence over 2 loops can be created for 2-loop control

External calculators and sequence control circuits (relay, timer, etc.) can be reduced

Communication with a PLC is possible without using any program

  • CC-Link, Profibus, and DeviceNet are supported (optional)
  • Since communication with the PLC without using any program is possible, engineering costs can reduced.

Communication with a PLC without using any programProtecting Knowledge of Users

Custom arithmetic expressions can be created using a ladder program

  • Multi-line ladder programs such as numerical calculation can be simplified into a single line using a custom ladder program
  • Custom ladder programs are securely managed using passwords
    - Custom arithmetic expressions can be made inaccessible to protect the knowledge of users

Custom arithmetic expressions can be created using a ladder program

Inheriting and Enhancing the UT750

2-loop control with a single controller

  • 2-loop synchronous and independent operation is available
    - The start and stop instructions can be run synchronously or independently.
  • Program pattern operation and constant value operation are available for 2-loop control
    - A sequence can be run by combining the program pattern operation and fixed-point operation.

2-loop control with a single controller

A variety of arithmetic instructions and large capacity ladder programs

  • 15 basic instructions and 111 application instructions
  • Ladder program capacity up to 1,000 steps

A variety of arithmetic instructions and large capacity ladder programs

Advanced arithmetic instructions are available

  • Square root, exponential, and logarithmic calculations are available
  • Temperature/humidity and CP calculations are available

Advanced arithmetic instructions

Reducing Downtime

Universal input and output

  • A single backup controller can be used for different control objects with different types of sensors and heaters/actuators
    - The UT75A can flexibly respond to a failure and sudden specification changes.

Universal input and output

Simple parameter setting and transition using an LL50A

  • Parameters can be set on other controllers just by copying them
  • Parameters can be set before mounting the controller to the panel
  • Parameters can be set without power supply for the controller

Simple parameter setting and transition using an LL50A

Advanced Control

9 Built-in Control Modes

The control mode allows easily configuring settings and making changes with parameters.

  • Single-loop control
  • Cascade primary-loop control
  • Cascade secondary-loop control
  • Cascade control
  • Loop control for backup
  • Loop control with PV switching
  • Loop control with PV auto-selector
  • Control with PV-hold function
  • Dual-loop control

8 built-in Control Mode

8 Built-in Control Types

  • 8 Built-in Control TypesPID control
  • ON/OFF control (1 point of hysteresis)
  • ON/OFF control (2 points of hysteresis)
  • Two-position, two-level control
  • Heating/cooling control
  • Sample PI control
  • Batch PID control
  • Feedforward control

For the correspondence between the above control mode and control types for each model, please refer to the specifications of each model.

Ladder Sequence Control

With built-in ladder sequence control, the range of applications are dramatically increased. This feature is standard in all the UTAdvanced controllers (except UM33A). The ladder sequence control function can replace a small PLC required by the application. Sequence control and PID control can be performed simultaneously.

  • Monitoring and control of external machinery
    E.g.: Lamps, switches, timers
  • Solve digital input/output logic functionality easily.
    Number of basic command types: 13
    Number of application command types: 73
[Example of ladder instruction] [Example of ladder programming]
ladder programming

Application Examples of Ladder Sequence Program

Alarm Sequence Control Circuits Can be Reduced
The ladder sequence program is built in the UTAdvanced as standard. The ladder sequence function enables monitoring and controlling peripheral devices such as relays, thus making it possible to reduce costs.

[Conventional]
Alarm action was built by a sequence control circuit (relay, timer, etc.) outside of the controller.

[UTAdvanced]
Alarm action is built by the ladder sequence program inside the UTAdvanced, thus making it possible to reduce costs.

Alarm Sequence Control Circuits can be Reduced

Example: Alarm annunciator

Host System Load is Reduced

[Conventional]
Action

Various types of analog data were captured into the host system (PLC, etc.) and calculated, and the results were processed by the field controller for control via a command.

[UTAdvanced]
Merit

The UTAdvanced with up to 4 analog inputs* enables various types of analog data to be captured directly into the controller and calculated by the ladder program, thus reducing the system-building load of the host. Action: Various types of analog data were captured into the host system (PLC, etc.) and calculated, and the results were processed by the field controller for control via a command.
* In the case of the UT55A

Host System Load is Reduced

Universal Input/Output
Select Input and Output Types via Configuration

Universal Input

Select from TC, RTD, mV/DC voltage and DC current.
(DC current input: No shunt resistor required)

Universal InputThe input type and range is user selectable via the front panel or by using the LL50A parameter setting software.

  • ±0.1% Indication Accuracy.
  • Connect up to two 2-wire transmitters simultaneously.

All instruments have a 15 V Loop Power Supply (15 V LPS) for a transmitter.
In addition, a 24 V LPS is also available simultaneously for some instruments as optional function.

Universal Input

Universal Output

User selectable for relay, Voltage pulse and current outputs.

  • Relay output: ON/OFF control, time-proportional PID control
  • Voltage pulse output: time-proportional PID control
  • Current output: continuous PID control

Heating/cooling control has two sets of universal outputs.

  • Any combinations of relay, pulse and current outputs are available.

Drive a motorized control valve by using position-proportional PID.

  • The position-proportional PID control function has two sets of relay outputs for direct/reverse rotation of motorized control valve.
  • The slide wire input to feed back the valve position is also available.

Auto-tuning (AT) Function

The following conditions can be set in order to increase the accuracy of calculating PID constants using AT .

  1. Two types of algorithms to calculate PID constants are available for selection.
    Normal: fast-rising PID constant
    Stable: slow-rising PID constant
  2. High and low output limits can be set individually for control output values during AT runtime.

Fuzzy Logic

SUPER Function Suppresses Overshoot

The field proven SUPER function utilizes a built-in operator experience and fuzzy theory to deliver fine control and suppress overshoot.

SUPER Function Suppresses Overshoot

SUPER2 Function Suppresses Hunting

The new SUPER2 function utilizes a built-in operator experience and modern control theory to deliver fine control and suppress hunting.

SUPER2 Function Suppresses Hunting

LL50A Parameters Setting Software

Parameter Setting/Program Pattern Creating Function

Parameters that determine controller functions can easily be set: controller model type, controller mode (single-loop control, cascade control, loop control with PV switching, etc.), universal input/output functions, setup parameters and others. It also allows you to create program patterns.

Parameter setting functions

Tuning Function

Used to tune a controller's PID parameters. Displays measured input value, target setpoint, and control output value as a trend graph on a personal computer screen, allowing PID parameter modification, AUTO/MAN switching, control output modification in manual operation, etc.

Tuning function

Ladder Building Functions

Ladder sequence programs can be created and ladder programs can be monitored.

Ladder Building functions

Network Profile Creation Function

Can be used to create an electronic device data sheet for Open Network.

Via Bus Powered USB Cable

Can be set parameters and ladder program while no power supply to controller.

Via Bus Powered USB Cable

Via Ethernet Communication Connector

Via Ethernet Communication Connector

Via Dedicated Adapter

Via Dedicated AdapterCan be used while attached to the control panel.

  • Applicable Termperature Controllers: UT75A, UT55A/UT52A, UT35A/UT32A, UP55A/UP35A/UP32A, UM33A

Via RS-485 Communication Terminals

Via RS-485 Communication Terminals

Simplicity

Bright & Easy to Read Active Color LCD Display

Bright & Easy to Read Active Color LCD Display

Versatile Color LCD Display

Versatile Color LCD Display

 

Optimal Display

Optimal DisplayThe controller menus and layout are adjusted in accordance with the level (EASY, STD, PRO) of information required by the user. If simple temperature or level control is needed, then select the easy configuration. Very sophisticated applications are no problem for the UTAdvanced. Just select the PRO setting and make use of the additional functionality shown in this mode. Advanced applications can be programmed in the PRO setting and then changed back to the easy setting to lock out functions not required by operators.

Active Color LCD Display

With Yokogawa's Active color display you can instantly tell, at a glance, the status of your process.
Alarm Status: Active color display changes from white (normal) to red (alarm).
Deviation Status: Color changes based on a PV deviation from SP.
User-defined Color: Choose between white or red display for constant Readings.

Active Color LCD Display

Compact Design

The 65-mm depth of the controller reduces the constraints on installation location.

Compact Design

Easy Operation Map, Navigation Guide and Navigation Keys

The navigation keys is an intuitive method to navigate the controller's configuration menus and setting its various menus. Navigation arrows even tell you what button to push next.

Easy Operation Map, Navigation Guide and Navigation Keys

Programmable Function Keys

Programmable Function KeysIt is easy to assign frequently used functions, such as the operation mode switch, Run/Stop, program pattern selection, Remote/Local, alarm latch release, and PID parameter display. The function of an external switch can also be assigned to the front panel key in conjunction with a ladder sequence program.

Scrolling Text

Scrolling Text

The UTAdvanced is equipped with a scrolling text feature that fully lists the parameter being modified. There is no guessing what parameter you are looking at. It is possible to turn off scrolling the text function.

Multiple Language Support

Multiple language support

The UTAdvanced is fluent in multiple languages — English, Spanish, French, and German. The use of the UTAdvanced by local language operators is not an obstacle.

User Settable Default Values

User settable default valuesParameter values (SP, P, I, D, ALM1, etc.) configured by the user can be stored in the controller as the default values. Even if a parameter set value is accidentally changed, it can be restored to the original value with a simple operation.

Now Available in Two Colors (White or Black)

UT55A/UT52A White & Black Models

Now you can choose a color that matches your work area: white (light gray), or black (light charcoal gray).

Parameter Setting

LL50A Parameter Setting Software (sold separately) allows for easily setting parameters.

Parameter Setting

Message Function

Using the message function and turning the contact input on/off, the message registered beforehand can be displayed on PV display by interrupt.The message is registered using LL50A Parameter Setting Software.The messages are limited to 20 alphanumeric characters. A maximum of four messages can be registered.

Message Function

Quick Setting Function

Minimum parameters necessary for operation can be set.

Security Function

The password function can prevent inadvertent changes to the parameter settings. If a password is set, the password is required when moving to the Setup Parameter Setting Display. When the password is verified, can be changed to the Setup Parameter Setting Display.

Networking

Communication Functions

A simple and easy network connection is provided!
A built-in function in the controller eliminates the need for a converter and makes wiring simple.

Communication Functions

Modbus/TCP

Modbus TCP/IP, a protocol that allows the controller to connect to any Ethernet network and have the ability to exchange data with the computers or devices on that network.

  • Allows control devices to be integrated into an application simply.
  • Works with any Modbus TCP/IP compliant software. 
  • Support for Modbus function codes 03, 06, 08 & 16. 
  • Gateway function allows RS-485 Modbus devices to communicate via Ethernet. 
  • Reduced labor costs in wiring and setup of a communications network. 
  • Physical Layer: 10 BASE-T/100 BASE-TX 
  • Maximum number of connection: 2

Modbus / TCP

Modbus/RTU

The data of UTAdvanced (slave units) can be displayed and saved on the DXAdvanced using the Modbus RTU function.

Modbus / RTU

Open Network (PROFIBUS-DP, CC-Link, DeviceNet)

Embedded open networks will provide direct connection to PLC's.

  • Reads data from UTAdvanced
  • Writes parameter setting value to UTAdvanced

Example:

PC-Link

Peer to Peer

The use of the ladder sequence program makes it possible to exchange analog data and status data between communication-capable UTAdvanced.

Example: A UTAdvanced in which an input error occurs sends a signal to another UTAdvanced to enable that UTAdvanced switch to MAN operation, thus shifting the whole system into a safe mode. In such a case, the safety mechanism can be built into the UTAdvanced and is not required in the host system.

Peer to Peer

Coordinated Operation

In coordinated operation, a single UTAdvanced termperature controller is used as a master controller and multiple UTAdvanced or other UTAdvanced digital indicating controllers as slave controllers.

The slave controllers are operated in accordance with the actions of the master controller.

Coordinated Operation

PC-Link

A protocol used for communicating with a general-purpose personal computer, or UTAdvanced series link module and serial communication module of FA-M3R (range-free controller).

PC-Link

Reliability

Dependable 3 year warranty*1

Backed by the high reliability and quality that Yokogawa has cultivated over many years.3 year warranty

RoHS/WEEE compliant

UTAdvanced is environmentally safe when disposing.

Dust-proof and drip-proof front panel (NEMA4*2 /IP66)

UTAdvanced can also be used for food-processing equipment with washable control panels.

Reliability

  1. The 3 year warranty extends 36 months after shipment from our factory.
  2. Hose down test only.

Specifications

ITEM UT75A
PV input Input type Universal input (TC, RTD, mV, V, mA)
Number 1(Std) 2(Max)
Indication accuracy ±0.1% of F.S.
Number of Control loops   1(Std) 2(Max)
Control scan period   50, 100, 200 msec
PV/SP data display   14-segment, 5 digits, Bar graph LCD display
Control outputs (MV) Type Relay, Voltage Pulse, Current
Algorithm ON/OFF, PID (Continuous, Time-proportional), Heating/Cooling, Position-proportional
Digital inputs Number 3(Std) 8(Max)
Type SP No.Change, PID No. Change, A/M Change, etc
Digital outputs Number 3(Std) 8(Max)
Function PV High, PV Low, Dev High, etc
Number of Program pattern Number 1
Number of program segment Number 20(Max)
Retransmission Number 1
Type PV, SP, OUT, etc
Remote (aux.) input (option) Number 1 or 2
Type 1 to 5 V, etc
Communication (option) Number 1 or 2
Type RS-485, Ethernet, PROFIBUS-DP, CC-Link, DeviceNet
Other specifications Power supply 100 to 240 VAC (+10%, -15%) or 24 VAC/DC (+10%, -15%) (option)
Power consumption Max 18 VA
Mass Max 0.5 kg

Comparison Chart (UT75A/UT55A/UT52A/UT35A/UT32A)

  UT75A UT55A UT52A UT35A UT32A
Model UT75A UT55A UT52A UT35A UT32A
Size 1/4 DIN    
1/8 DIN      
Depth from the panel surface (mm) 65 65 65 65 65
Number of Control loops Standard (Maximum) 1(2) 1 1 1 1
Control Scan Period (msec) Choice 50/100/200 Choice 50/100/200 Choice 50/100/200 200 200
Display Function Number of PV Display Digits 5 5 5 5 5
Active Color PV Display Function
Guide Scroll Display Function
Message Display Function
Bar graph display (Number) ✓(2) ✓(2) ✓(2) ✓(1) ✓(1)
PV Input Indication Accuracy (% of F.S.) 0.1 0.1 0.1 0.1 0.1
PV Input Type TC
RTD (3-wire)
RTD (4-wire)    
mV, V
mA
Number of Analog Inputs Standard (Maximum) 1(4) 1(4) 1(2) 1 1
Number of SPs (PIDs) Maximum 20(16) 8 8 4 4
Number of Control Modes Maximum 9 8 8 1 1
Number of Control Types Maximum 8 8 8 5 5
Control Output Type Relay Contact Output, Voltage pulse output, Current output
Algorithm ON/OFF
PID (Continuance, Time Proportion)
Position proportional
Heating/cooling
Number of Analog Outputs Standard (Maximum) 2(3) 2(3) 2(3) 2 2
Number of Digital Inputs Standard (Maximum) 3(8) 3(9) 3(5) 2(7) 2(4)
Number of Alarms   8 8 8 4 4
Number of Digital Outputs Standard (Maximum) 3(8) 3(18) 3(5) 3(8) 3(5)
Communication RS-485 communication (Maximum) ✓(2) ✓(2) ✓(1) ✓(1) ✓(1)
Ethernet communication    
Open Network (CC-Link/PROFIBUS-DP/DeviceNet)    
Various Function Quick Setting Function
Split Computation Output Function    
Ratio and Square Root Extraction Function    
Remote SP Function    
24 V DC Loop Power Supply Function  
Heater Break Alarm Function  
(Standard type)

(Standard type)

(Standard
type or
Heating/
cooling type)

(Standard
type or
Heating/
cooling type)
Ladder Sequence Function (Number of max. steps) ✓(1000) ✓(500) ✓(500) ✓(300) ✓(300)
Other specifications Power Supply AC100 V to 240 V
AC/DC 24 V
Dust and waterproof Level of Front Panel NEMA4 *1 (IP66) NEMA4 *1 (IP66) NEMA4 *1 (IP66) NEMA4 *1 (IP66) NEMA4 *1 (IP66)
Configuration Tool Via Light-loader Communication
Via Maintenance Port
Communication
Via RS-485/Ethernet
communication
✓/✓ ✓/✓ ✓/- ✓/✓ ✓/-

The table above includes specifications of the standard models only.
* 1: Hose down test only.

Input Range

Input type  
TC K, J, T, B, S, R, N, E, L, U, W
PL-2, PR20-40, W97Re3-W75Re25
RTD JPt100, Pt100
DC Voltage 0.4 to 2.0 V, 1.0 to 5.0 V, 0.0 to 2.0 V, 0 to 10 V, -10 to 20 mV, 0 to 100 mV
DC Current 4 to 20 mA, 0 to 20 mA

Ressources

Vue générale:

With advances in process automation comes a greater need for level measurement and control. As pressure on at the bottom surface of a liquid is proportional to the height of the liquid's surface, you can measure pressure using a differential pressure transmitter to detect the level of the liquid, acquire the data on the UT75A Digital Indicating Controller, and use the measurements to control the tank level.

Industries:
Vue générale:

Adding the CP calculation option to the advanced UT75A Digital Indicating Controller enables CP (Carbon Potential) control. CP calculation can be carried out with just one line of a UT75A ladder program.

Industries:
Questions fréquentes
Questions fréquentes
I want to use 2 communication systems.
(ns-faq-ut-2085-select)
Questions fréquentes
Questions fréquentes
Questions fréquentes
Questions fréquentes
Can I set up 4 alarm relay outputs?
(ns-faq-ut-2016-setting)
Questions fréquentes
Questions fréquentes
Questions fréquentes
Questions fréquentes
Questions fréquentes
Questions fréquentes
Questions fréquentes
Questions fréquentes
Questions fréquentes
I can't find a parameter I want to set.
(ns-faq-ut-2001-setting)
Questions fréquentes
Questions fréquentes
Questions fréquentes
Can I use analog input in computations?
(ns-faq-ut-2032-program)
Questions fréquentes
Questions fréquentes
Questions fréquentes
Questions fréquentes
Questions fréquentes
Questions fréquentes
Questions fréquentes
Questions fréquentes
Questions fréquentes
Questions fréquentes
Questions fréquentes
Questions fréquentes
Questions fréquentes
Questions fréquentes
Questions fréquentes
Questions fréquentes
How can I enter initial settings?
(ns-faq-ut-2064-setting)
Questions fréquentes
Questions fréquentes
Is a terminal cover included?
(ns-faq-ut-2088-select)
Questions fréquentes
Questions fréquentes
Questions fréquentes
Questions fréquentes
Questions fréquentes
Questions fréquentes
What is the alarm standby function?
(ns-faq-ut-2111-spec)
Questions fréquentes
Questions fréquentes
Questions fréquentes
Questions fréquentes
Questions fréquentes
Questions fréquentes
Questions fréquentes
Questions fréquentes
Questions fréquentes
Questions fréquentes
Questions fréquentes
Questions fréquentes
Questions fréquentes
Questions fréquentes
Questions fréquentes
Questions fréquentes
Questions fréquentes
Questions fréquentes
Questions fréquentes
Do you sell terminal covers?
(ns-faq-ut-2233-other)
Questions fréquentes
Questions fréquentes
Questions fréquentes

Downloads

Rechercher plus d'informations sur nos compétences, technologies et solutions

Contactez-nous

Haut