Dissolved oxygen (DO) is a liquid process measurement for determining the amount of oxygen dissolved or carried in the process liquid. There are three common technologies for dissolved oxygen measurements: polographic, galvanic and optical. The standard units of measure are milligrams per liter (mg/l), parts per million (ppm), parts per billion (ppb), or % saturation.
The FLEXA™ series analyzers are modular-designed analyzers used for continuous online measurements in industrial installations. They offer single or multi-sensor measurement.
The FLEXA™ series analyzers are used for continuous on-line measurements in industrial installations. With an option for single or dual sensor measurement, they are the most flexible two-wire analyzer available.
What is a 4-Wire analyzer?
This terminology only refers to power supply of the analyzer. It does not have any reference to the number of wires. The 4-wire analyzers separate the power supply from the measurement output. As a minimum we need two wires for the power supply and two wires for the current output of the analyzer. The EXA450 has two analog outputs. four digital outputs. One digital input and of course the sensor input wiring. That is why EXA450 has 6 cable glands. The advantage is that any functions are combined in one enclosure. Local control and alarm functions are possible. In small control installations this is a cost saving feature.
What is a 2-Wire analyzer?
The 2-wire analyzers commonly referred to as Analyzers combine the wires for current output, for power supply and digital communication. The FLXA21 combines the power supply with mA output and HART® communication: all with only two wires plus shield. The advantage is safety (only 24VDC) and simple installation. Just two wires between control room and analyzer. This is an advantage in large scale operations where process control is centralized in the DCS system.
Rechercher plus d'informations sur nos compétences, technologies et solutions