Radar Level Meter PULS60Y Series

Measuring Principle

The measuring instrument sends out short radar pulses toward the measured product via the antenna system. The product surface reflects the signal waves, which are then received back by the antenna system. The instrument calculates the level from the running time of the radar pulses and the entered tank height.

Advantages

Non-contact radar technology is characterized by a particularly high measurement accuracy. The measurement is affected neither by fluctuating product properties nor by changing process conditions such as temperature, pressure or intense dust generation. User-friendly adjustment without vessel filling and emptying saves time.

Contact

< Notes>

These products are released to the Customers in the following Sales area.

(1) Sales area : Australia, New Zealand, South East Asia, India, Middle East

(2) Customers : Customers for bundled solution, major project and selected global major accounts

We can also provide Level switches : Vibration(SWING, VIB, WAVE) & Capacitance(CAP).
For more information, please contact our sales.

 

Singapore
(Regional Head Quarters)
Yokogawa Engineering Asia Pte. Ltd.
5 Bedok South Road, Singapore 469270, Singapore
Phone: (65)-6241-9933  Fax: (65)-6241-2606
Australia Yokogawa Australia Pty. Ltd.
Tower A, 112-118 Talavera Road, Macquarie Park NSW 2113, Australia
Phone: (61)-2-8870-1100  Fax: (61)-2-8870-1111
Thailand Yokogawa (Thailand) Ltd.
799 Rama 9 Road, Bangkapi, Huaykwang, Bangkok 10310 Thailand
Phone: (66)-2-715-8600  Fax: (66)-2-715-8688
India Yokogawa India Ltd.
Plot No.96, Electronic City Complex, Hosur Road, Bangalore - 560 100, India
Phone: (91)-80-4158-6000  Fax: (91)-80-2852-0625
Middle East Yokogawa Engineering Middle East FZE- Dubai
P.O.Box 18112, Jebel Ali Free Zone, Bldg no. LIU FZS1-BH03,
Free South Zone, Dubai, UAE
Phone: (971)-4-8049100  Fax: (971)-4-8860844

* For the users in Japan, click here.

 

Applications in liquids

Low frequency C-band sensors PULS 65Y and 66Y are able to penetrate foam and strong condensation and are thus suitable for very difficult process conditions. Completely unaffected by vapour, gas composition, pressure and temperature changes, the sensors reliably detect the surface of widely different products.

The compact, high frequency K-band sensors PULS 61Y, 62Y and 63Y are particularly suitable for applications where high accuracy is required. Excellent signal focussing is achieved even with small antennas.

pus60y-figure1

Optimized for bulk solids

Due to the very good signal focussing, internal silo installations or buildup on the vessel wall do not influence the measurement. A high sensitivity electronics adapted to the requirements of bulk solids measurement enables reliable level measurement of different products up to 120 m. The measuring principle is unaffected by strong dust generation, filling noise, air flow due to pneumatic filling and temperature fluctuations.

pus60y-figure2

Model / Application Outward Measuring Range Accuracy Process Fitting Process Temperature Process Pressure
PULS WL 61Y

Liquids, 
in the water
and sewage
management
pulswl61y up to 15 m,
+/- 2 mm
Thread G1½,
mounting
strap, compression
flanges from
DN 80, 3"
-40 to +80
deg C
-1 to +2 bar
(-100 to
+200 kPa)
PULS 61Y

Liquids under
easy process
conditions
puls61y up to 35 m,
+/- 2 mm
Thread G1½, 1½ NPT,
mounting
strap, compression
flanges from
DN 80, 3"
-40 to +80
deg C
-1 to +3 bar
(-100 to
+300 kPa)
PULS 62Y

Storage tanks,
reactors and
process vessels,
also with
arduous process
conditions
puls62y up to 35 m,
+/- 2 mm
Thread from G1½, 1½ NPT,
flanges from
DN 50, 2"
-196 to +450
deg C
-1 to +160
bar
(-100 to
+16000 kPa)
PULS 63Y

Aggressive
liquids or
with hygienic
requirements
puls63y up to 35 m,
+/- 2 mm
Hygienic
fittings,
boltings,
flanges from
DN 50, 2"
-196 to +200
deg C
-1 to +16 bar
(-100 to
+1600 kPa)
PULS 65Y

Liquids under
easy process
conditions
puls65y up to 35 m,
+/- 8 mm
Thread from
G1½, 1½ NPT,
flanges from
DN 50, 2"
-40 to +150
deg C
-1 to +16 bar
(-100 to
+1600 kPa)
PULS 66Y

Storage tanks,
process vessels
or standpipes
under arduous
process
conditions
puls66y up to 35 m,
+/- 8 mm
Flanges from
DN 50, 2"
-60 to +400
deg C
-1 to +160
bar
(-100 to
+16000 kPa)
PULS 67Y

Bulk solids
under easy
process
conditions
puls67y up to 15 m,
+/- 2 mm
Mounting strap,
compression
flanges from
DN 80, 3"
-40 to +80
deg C
-1 to +2 bar
(-100 to
+200 kPa)
PULS SR 68Y

Bulk solids
also under
arduous process
conditions
pulssr68y up to 30 m,
+/- 2 mm
Thread from
G1½, 1½ NPT,
flanges from
DN 50, 2"
-40 to +250
deg C
-1 to +100
bar
(-100 to
+10000 kPa)
PULS 68Y

Bulk solids
also under
arduous process
conditions
puls68y up to 75 m,
+/- 2 mm
Thread from
G1½, 1½ NPT,
flanges from
DN 50, 2"
-196 to +450
deg C
-1 to +160
bar
(-100 to
+16000 kPa)
PULS 69Y

Bulk solids
for smaller
or very large
vessels.
puls69y up to 120 m,
+/- 5 mm
Mounting strap,
compression flanges
from DN 80, 3",
flanges from
DN 80, 3", adapter
flanges from
DN 100, 4"
-40 to +200
deg C
-1 to +3
bar
(-100 to
+300 kPa)

Looking for more information on our people, technology and solutions?


Contact Us
Top