Nano-point Delivery / Nano-point Sampling SU10

Single Cellome Unit SU10 enables the delivery of substances, such as genome editing tools, directly to the cytoplasm or nucleus of targeted single cells.
For use with an inverted optical microscope. The microscope is not included with the SU10.

Advantages of SU10

- Single-cell targeting with direct delivery into nucleus or cytoplasm.
- Minimal damage to cells.
- Automated, high speed, and high success rate.

Details

Automated nano-point injector for single cell: SU10

 

Single-cell targeting with direct delivery into nucleus or cytoplasm

  • Select cells for delivery while observing under a microscope and deliver substances to into nucleus or cytoplasm of targeted cells.
  • Easy Control of XY-position and automatic control of delivery Z-position in software.

 

SU10 direct delivery

FITC-labelled dextran solution (molecular weight 70,000) was delivered into HeLa cells.

 

Minimal damage to cells

  • The nanopipette is a glass pipette with minimum tip outer diameter of several tens of nanometers, minimizing damage to cells.
  • Delivery with high cell viability enables live single-cell analysis.

SU10 tip of the nanopipette

The tip of the nanopipette under an electron microscope.

SU10 damage less

 

Automated, high speed, and high success rate

  • The SU10 uses automated cell surface detection, insertion, and delivery to the cell. The process takes approximately 10 seconds with a 90% success rate. (Experiment by Yokogawa)
  • Operations that were previously performed manually by experienced researchers are much easier with SU10.

SU10 nano delivery process

 

Examples of cells that can be targeted

  • Cell line (HeLa, HEK293, CHO, MDCK, HepG2, etc.)
  • Primary cell culture (Neuron, Hepatocyte, etc.)
  • Stem cell lines (iPS cell, ES cell, etc.)
  • Immune cell lines (T cell, Ba/F3 cell, etc.)
  • Plant cell with cell wall

 

Examples of materials that can be injected

  • CRISPR-Cas9 (Cas9 RNP)
  • Protein (antibody, GFP, etc.)
  • Nucleic acid (single-stranded DNA, etc.)
  • Fluorescent reagent

 

Application example

SU10 application

 

Q&A

Q1. How is it different from a microinjection system?

A1. The SU10 lowers the damage to a cell with the nanopipette because its tip size is less than 1/10 of a tip used for microinjection.
Automatic detection of cell surface enables a high success rate of insertion to the intended depth of a cell.
The delivery operation uses an electrical method rather than pneumatic or hydraulic pressure.

 

Q2. How is it different from traditional transfection methods (e.g. transfection reagents, electroporation)?

A2. The SU10 can deliver materials into the selected cells.
The SU10 enables direct delivery of reagents into the cytoplasm or nucleus.

 

Q3. How is it different from electroporation?

A3. In addition to the above-mentioned “difference from traditional transfection methods”, due to automated cell surface detection, the suspension of cells is not required during injection.

 

Q4. What is the max volume of injection into the cell?

A4. It is estimated to be tens of femtoliter (fL) per second (1fL=1x10-15L).
The volume can be changed by software settings.
* The delivery volume may vary depending on the solute and vehicle.

 

Q5. Is the nanopipette disposable?

A5. Yes, but one nanopipette can deliver to 50 cells or more*.
* Experiment using HeLa cells by Yokogawa.

Specification

Actuator Module Coarse movement (Motor actuator) Stroke: Approx. 50mm/axis (setting resolution XYZ axis: 0.625μm)
Fine movement (Piezo actuator) Stroke:100μm/axis
(setting resolution XYZ axis: 10nm, at penetration and extraction: 1nm)
Measurement Module Voltage generation range -10V to +10V (setting resolution: 10mV)
Current measurement range -900nA to +900nA (setting current range:±9V)
Power supply Power consumption (Main controller + Piezo controller) 100VA or lower
Supply voltage (Main controller) 100 to 200V / 220 to 240VAC (Switching not required)
Supply voltage (Piezo controller) 100 to 120V / 220 to 240VAC (model must be specified when placing an order)
Power supply frequency (Main controller + Piezo controller) 50/60Hz
External dimensions and weight Main controller 260(W) x 99(H) x 280(D) mm, Approx. 2.8kg
Piezo controller 236(W) x 88(H) x 273(D) mm, Approx. 4.6kg
Actuator module 270*(W) x 219(H) x 245*(D) mm, Approx. 2.2kg
* In case the X and Y axes move in the direction of the maximum size
Measurement module 85(W) x 30(H) x 43(D) mm, Approx. 0.1kg
Joystick 100(W) x 145(H) x 144(D) mm, Approx. 0.3kg
Safety guard 130(W) x 230(H) x 287(D) mm, Approx. 0.7kg
Tip outer diameter of nanopipette (in case of SU10ACC-NP01) Under 100nm (reference value)
Operation Environment 15 to 35℃, 20 to 70%RH No condensation, altitude up to 2000m
Microscope compatibility For use with an inverted optical microscope. * Microscope is not included with the SU10.
Please contact Yokogawa to possibly install the SU10 on a different inverted microscope.
Installation examples; Olympus IX71, Olympus IX83, Nikon Ti2

 

Resources

Overview:

SU10 is a novel technology that enables the delivery of target substances directly into cells (nucleus or cytoplasm) using a "nano" pipette made of a glass capillary with an outer tip diameter of tens of nanometers.

Overview:

This application note will introduce the features of the SU10 and provide examples demonstrating the delivery of genome editing tools (Cas9 RNP) using the technology.

Downloads

Videos

Overview:

YOKOGAWA will contribute to technology evolution particularly in measurement and analytical tools to help build a world where researchers will increasingly focus on insightful interpretation of data, and advancing Life Science to benefit humanity.

Notizie

Cerchi più informazioni su tecnologia, soluzioni o sulla nostra squadra?

Contattaci

Top