SV / MV용 YS1350 / YS1360 수동 설정기

YS1350은 수동으로 SP 신호를 컨트롤러 등에 출력할 수 있는 수동 설정기입니다. YS1360은 조작기에 MV 신호를 수동으로 출력할 수 있는 수동 설정기입니다. YS1350 및 YS1360에는 작동 모드 전환 스위치 [캐스케이드 (C) 및 수동 (M)], 상태 입력 기반 작동 모드 선택기 기능 및 작동 모드 식별 상태 출력 기능이 표준으로 포함되어 있습니다. YS1350 및 YS1360은 Yokogawa의 독점 기술, 사용의 용이성 및 확장성으로 높은 신뢰성을 제공합니다. 기본형은 DIN 사이즈로 장착 공간을 절약하고 표준 (CE 및 FM)을 준수합니다. 


  • 풀 도트, LCD에 의한 시인성 향상 : 햇빛이 직접 닿는 같은 패널면에서도 좋은 시인성을 확보 할 수 있습니다. 또한 미터 표시, 트렌드 표시, 바 표시, 알람 표시 및 이벤트 표시 등의 작업 화면을 선택하여 볼 수 있습니다. 모든 파라미터는 전면 패널 디스플레이를 통해 설정할 수 있습니다.
  • 전면 패널의 조작으로 파라미터를 모두 설정할 수 있습니다. (내부 장치를 꺼낼 필요 없음)
  • 파라미터는 별매인 YSS1000 설정 소프트웨어를 사용하여 설정할 수도 있습니다.
  • 메모리 백업을위한 비 휘발성 메모리 : 메모리 백업 시 배터리 또는 커패시터가 사용되지 않아 유지 관리에 용이합니다.
  • 깊이 250 mm (기본형만 해당)
  • 전면 방진 방적 IP54 구조 (기본형 만
  • CE 마크 (기본형 및 YS100 대응 형 전용)
  • FM 비발화 폭발 방지 (기본형에만 해당)
  • 통신 (옵션) 이더넷 (Modbus / TCP, 기본형만 해당),  RS485 (PC 링크, Modbus, YS 프로토콜, YS80 내부 장치 호환 형에서는 사용할 수 없음), DCS-LCS 통신
  • YS100 시리즈와 호환 : 설정 및 조작 방법에도 호환성이 있습니다. 기본형의 경우 신호 단자 간격은 다르지만 신호는 상대적으로 동일한 위치에 배치하고 있습니다. SMST와의 호환성을 보장하기 위해 다음과 같은 기능이 포함됩니다.
    ▪ 미터 디스플레이가 작동 디스플레이에 추가
    ▪ Housing 교체용 (SHUP-000 별도 이용 가능)

Easy to use



YSS1000 Configuration and Programming Software

Programming demonstration video

Programming demonstration video 

Three connection modes

Three connection modes
Connection modes: USB, Ethernet or RS485
When connecting via RS485 or Ethernet, a communication option is required on the main unit.

Full set of computation functions

  • Supports parameter setting for all YS1000 models

Password protection function

Passwords can be assigned to user programs to prevent unauthorized access to proprietary programs.
A password on the main unit prevents unexpected changes in the engineering parameters.

Compact case
Designed with a Lightweight, Compact Case

Designed with a Lightweight, Compact Case

Designed with a Lightweight, Compact Case

Provides for greater freedom of instrumentation design

Compact, lightweight design allows the use of smaller and less expensive panel. Moreover, it allows attachment to doors which was previously difficult.

Simple exterior 

High reliability

Control Output Backup Function

The control output backup function comes standard with YS1000 series controllers (YS1700 and YS1500) and the Manual Station for MV Setting (YS1360).

Dual CPU

With dual-CPU construction (main CPU and display CPU), manual control capability and display continues even if an abnormality occurs on one of the CPUs. If controller self-diagnostics detects a control circuit failure, the controller can suspend analog/digital output, switch to manual mode and allow manual control by operator.

Failure area
Main CPU fail Display CPU fail All CPU and
Control Circuit
Control with "Hard manual" X X X
Manual operation with front keys X X N/A
Display for PV and SV X X N/A
Control algorithm stop stop stop

Manual operation-"hard manual"

Independent manual override is built into the control circuits, ensuring that control output can continue even when a control circuit including the CPU experiences a problem.

*Comes standard with YS1700-1xx, YS1500-1xx, YS1360-1xx

Manual operation-"hard manual"


Battery free memory backup

Nonvolatile memory is used for memory backup. Service life is improved because no batteries, backup capacitors, or other components are used.


AC/DC power supply resists powerline fluctuations

The AC/DC (100 V /24 V ) power supply powers the instrument to provide consistent performance.Also accepts DC power regardless of polarity (specify 220 V power supply when ordering).


Improved basic control performance

The YS1000 series achieves higher performance than previous models (YS100 series).

  • I/O accuracy
    Voltage input accuracy: ±0.2% ⇒ ±0.1%
    Voltage output accuracy: ±0.3% ⇒ ±0.1%
    Current output accuracy: ±1.0% ⇒ ±0.2%
  • Internal data resolution of the I/O signal: 1/1000 ⇒ 1/10000
  • Internal computation resolution of PID and other computations: 1/4096 ⇒ 1/65536


Controller online replacement function (portable manual station)

Use the YS110 portable manual station when exchanging or performing maintenance on a controller. You can switch to the spare controller without interrupting the control output.

Controller online replacement function


Front panel conforms to the IP54 waterproof standard

Tougher environmental resistance.

Front panel conforms to the IP54 waterproof standard


Other specification

  • CE Mark (for basic type and compatible type for YS100)
  • FM nonincendive approved (FM Class I, DIV 2)
  • CSA safety and nonincendive approved (Class I, DIV 2)

Powerful and Flexible

Ethernet support

The instrument can be easily connected to DAQWORX, SMARTDAC+, general-purpose SCADA, and OPC servers via Ethernet (Modbus/TCP).

Ethernet support

Ethernet : Available to the YS1000 basic type. Modbus/TCP server function (one connection).

Communication with PLC

Connections are enabled using the FA-M3' s UT link module and the RS485 communication function. No programming is necessary to exchange data between the instrument and the FA-M3.

Communication with PLC

The YS1000 can also be connected to PLCs of various manufacturers via the Modbus communication protocol.

Communication with CENTUM

As with previous models, communication with Yokogawa's DCS (CENTUM) is supported. This is ideal for DCS backup in chemical plants and other applications requiring extreamly high reliability.

Applicable Models: YS1700,YS1500,YS1350,and YS1360

Communication with CENTUM



Best Solution for Automatic Boiler Control
Sensors and controllers for the efficiency and environmental performance


For safe and efficient operation, the quality of feedwater, steam, and condensate in boiler plants must be controlled and maintained in the most favorable conditions.


Floating-point format calculations have enabled physical quantities (in engineering units) to be used in calculations.


To technology in iron & steel industry is continuously improved to obtain the best possible performance. The improved plant performance gives rise to the higher quality improvement and lower cost, and simultaneously environmental friendly plant operation.


Continuous technology improvement is ongoing in the pulp & paper industry to obtain the best possible performance. The improved plant performance translates to the higher quality improvement and lower cost, and simultaneously environmental friendly plant operation.


Automated control of industrial boilers is an excellent application for YS1700 microprocessor-based loop controllers. These instruments can be programmed to perform the operations of plant master, boiler master, fuel and air control with oxygen trim and drum level/feedwater control.

Instruction Manuals
General Specifications
Technical Information

Product Overviews


    The YSS1000 setting software (hereinafter referred to as the YSS1000) is package software to configure the functions of the YS1000 series (hereinafter referred to as the YS1000) devices. Writing and reading of parameters and user programs of the YS1000, and PID tuning and monitoring of user programs can be performed through the use of communication.

기술 및 솔루션, 요꼬가와에 대한 자세한 정보를 찾고 계십니까?

견적 및 기술문의