데이터 로깅 소프트웨어 GA10

데이터 로깅 소프트웨어 GA10은 PC에서 데이터를 모니터링하고 기록하는 소프트웨어입니다. 다양한 기기의 데이터를 네트워크를 통해 PC에서 통합적으로 감시하고 기록함으로써 업무의 부담을 줄일 수 있습니다.

특징

여러 기종 연결

  • 데이터 로거 / 레코더 / 온도 조절계 / 신호 변환기 / 전력 모니터 / 파워 미터까지 폭넓게 대응, Modbus 장치의 데이터도 수집 가능

간단한 설정

  • 연결 기기를 선택하는 것만으로 수집 시작 (간단 설정 모드)
  • 트렌드 파형의 자동 인쇄를 쉽게 설정 (보고서 인쇄 옵션)

높은 신뢰성

  • 연결 해제시 자동 재 연결 기능, 정전 전까지의 데이터 파일 보호
  • 데이터 보완 기능 (Backfill 기능)
  • ServerOS 대응

보기 쉬운 화면

  • 다양한 화면
  • 실시간 모니터

다양한 기능 (*옵션)

  • 알람 소리
  • E-mail로 보내기
  • 연산 채널 *
  • 보고서 인쇄 *
  • 멀티 로깅 표준 지원
  • 사용자 권한 설정
  • 모니터링 PC (클라이언트) 추가
  • OPC-UA 서버 *
  • DDE 서버
  • 사용자 지정 디스플레이 * New!

Details

한눈에 보기 쉬운 화면 

다양한 화면 선택
(1) 트렌드 화면 (2) 디지털 화면 (3) 바그래프 화면 (4) 미터 화면 (5) 알람 모니터링 / 내역 화면 (6) 작화Wide variety of display screens

사용자 정의 디스플레이 화면 (/CG 옵션) *New

PC에 사용자가 원하는대로 화면을 구성하여 감시 및 모니터링이 가능하도록 하는 기능

Sample GA10 custom screen

  • 최대 50 화면 작성 가능 screens
  • 모니터에서 접속 기기의 조작도 가능
    * Modbus Write 명령
  • 화면 구성은 DAQStudio 소프트웨어를 통해 가능

여러 기종 연결 

데이터 로거, 레코더, 온도 조절계, 신호 변환기, 전력 모니터, 파워미터 등 다양하게 지원되며 Modbus 장치의 데이터 수집도 가능 Connectivity with many devices

대상 기종은 아래 표를 참조하십시오.

Compatible Models

  Products to be connected
Data Logger GM10
MX100, MW100
DA100
Recorder GX10, GX20, GP10, GP20
DX1000, DX1000N, DX2000
DX1000T, DX2000T
FX1000
MV1000, MV2000
CX1000, CX2000
μR10000, μR20000
DR130, DR230, DR240
Temperature Controller UT75A, UT52A, UT55A, UT35A, UT32A, UP55A, UP35A, UM33A
PLC FA-M3V(F3SP7x) (Connected as Modbus instruments)
Power Monitor PR300, UPM100, UPM101 (Connected as Modbus instruments)
Signal Conditioner VJU7, VJS7, VJA7, VJH7, VJP8, VJQ7, VJQ8, VJX7, MVHK, MVRK, MVTK
(Connected as Modbus instruments)
Power Meter WT300*, WT500*, WT1800*,WT3000, WT3000E
Modbus device Instruments supporting Modbus communication
Software DAQ32Plus, MXLOGGER

* WT300, WT500, WT1800은 연결을 위한 소프트웨어 Gate WT for GA10 무상 제공

간단한 설정

자동 인쇄 설정

트렌드, 그래프 등의 인쇄를 자동화하여 기록 데이터, 대상 채널, 프린트 및 설정 등을 할 수 있습니다.
레이아웃을 사용자가 정의하여 Excel 또는 PDF 출력도 가능합니다. (보고서/인쇄 기능 옵션)

Auto print settings

 

수집 구성

연결된 기기를 선택하는 것만으로도 데이터 수집 준비 완료. 

Aquisition settings

 

높은 신뢰성

  • 연결 해제시 자동 재 연결 기능, 정전 전까지 데이터 파일 기록 
  • 데이터 보완 기능 (Backfill 기능)*

          * 타임 스탬프를 기기 시간 우선으로 설정하고 GM/GX/GP/DX/MV 사용중인 경우 가능

Data supplementing function

  • Server OS 대응
    연속 가동에도 문제없는 안정적인 시스템 구축 가능

다양한 기능

  • 알람 소리
    • 알람 발생시에 PC에서 beep 음이 울립니다
  • E-mail 전송
    • 다양한 수집 상황에 따라 이메일 보내기
    • 전송 조건 및 전송 내용을 여러 설정 가능
    • SMTP 인증 / POP3 before SMTP 지원
  • 연산 채널 *옵션
    • 측정 데이터를 실시간으로 연산
    • 사칙 연산을 비롯한 각종 연산에 대응
    • 알람도 설정 가능
  • 보고서 인쇄 *옵션
    • 옵션 ◦ 트렌드 시보 / 일보 등의 데이터를 자동으로 인쇄
    • 레이아웃 사용자 정의 및 PDF 출력 / Excel 출력 지원
  • OPC-UA 서버 *옵션
    • 안전하고 신뢰할 수있는 OPC-UA 통신에 대응
    • 해당 SCADA와 데이터베이스 등으로 측정 데이터를 활용 가능
    • 연결 확인 된 OPC-UA 제품 : 
      FAST/TOOLS V9.05 (YOKOGAWA)
      GENESIS64 7.6.6 (iconics)
      Ignition V10.85 (inductive automation)
  • 멀티 로깅 표준 지원
    • 타이밍의 여러 데이터 수집을 실현
  • 2 시간 모드
    • 타임 스탬프로 PC 시간 외 기기 시간도 지정 가능
    • 기기 본체의 파일 무결성 확보
  • 사용자 권한 설정 
    • 소유자 / 관리자 / 운영자 / 모니터 4 수준의 권한을 설정
  • PC 모니터링 (client) *옵션
    • 여러 대의 PC에 의한 감시와 데이터 공유가 가능
  • DDE 서버
    • Microsoft Excel을 비롯한 DDE 대응 소프트웨어로 측정 데이터를 활용 가능
  • 사용자 지정 디스플레이 NEW *옵션
    • 디지털 트렌드, 바, 이미지 등의 화면을 자유롭게 배치 가능
    • 환경에 맞게 사용자 정의 화면에서 모니터를 실현

Data monitoring in manufacturing sites

Monitor factory data from the office.
You can also add clients and share data across multiple PCs.

Data monitoring in manufacturing sites

 

Recording data from multiple equipments

Saves testing/manufacturing equipment data on a PC.
You can even record individual equipment at separate times.

Recording data from multiple equipments

Modbus operation via custom displays *New

You can change the values of Modbus registers from custom displays.
Operation (control or record) can also be changed.

Modbus operation via custom displays

자료실

Overview:

Environmental data (water quality, amount of flow) is measured on-site and monitored from an office.

Overview:

Measures temperature and vibration of the turbine for rapid identification of abnormalities.

Overview:

Controls temperature in, and acquires data from, various internal components of plastic film manufacturing equipment. An easy to use, high cost-performance data acquisition and monitoring system can be assembled by using Ethernet compatible instruments and GA10.

Overview:

With advances in process automation comes a greater need for level measurement and control. As pressure on at the bottom surface of a liquid is proportional to the height of the liquid's surface, you can measure pressure using a differential pressure transmitter to detect the level of the liquid, acquire the data on the UT75A Digital Indicating Controller, and use the measurements to control the tank level.

업종:
Overview:

Caustic soda and hydrochloric acid, produced in electrolyzer plants, are fundamental materials used in varieties of industries; chemicals, pharmaceuticals, petrol-chemicals, pulp and papers, etc. Profit is the result of the effective production with minimized running / maintenance cost. Proper control of the process brings you stabilized quality of products with the vast operational profit.

Overview:

Taking advantage of sensors already available in your system, you can simply add VJ series signal conditioners or the UM33A Digital Indicator with Alarms to easily build a monitoring system on a PC.

GateDX-P, GateWT, GateOPC, and GateMODBUS can be run as an automatically executing service, but this is not available on Windows Vista. Instead, please use the function included in the latest version (GateDX-P: R1.05 or later, GateWT: R2.04 or later,...
  My OS is Windows 7. I've disabled all my Windows firewall settings. I get a response to a ping. I changed the WT300 series communication settings to WT200 compatible mode. When connecting the WT300 with GateWT, you should actually e...
Enter "localhost." The "localhost" represents the PC you are currently using. You can enter the IP address of the instrument to which you want to connect in the project settings after logging in.
The GA10 software acquires data from a variety of instruments including recorders and data loggers via network. You can perform data monitoring on a PC and record to hard disk.
Download it from our website. After 60 days, you can enter a license that you purchase to continue using the product.
Type the credentials below. No other changes are needed. IP address: localhost (the PC you are currently using) Port: 50310 User name: admin Password: [leave blank]
Acquisition is possible via our DAQWORX software (DAQLOGGER and DAQ32Plus).
These files contain information required for the GA10 to connect to Modbus-compliant devices. They can be created with the Modbus device definition file creation tool.
Yes, if they are Modbus-compliant.
Create multiple projects and then run them in parallel.
The scan interval set on the device is automatically used. To change this setting, change it on the device.
You can select binary, Excel, or both.
Yes, but it is not recommended because damage can result if cables become unplugged, and in other circumstances.
You can, with a computation function (option). Assign measurement channels to MATH channels, and set alarms on the MATH channels.
You cannot set up alarm ACK on the main unit by using the GA10. Set up ACK on the instrument.
If recording at the same interval as the scan interval, you can go all the way back to recording start. Otherwise, you can only go back to the last 3600 points.
You can use this to view GA10 data from another PC. Operation is available using the same screen as the GA10.
It is the GA10 installation folder on the PC. You can check this in the setting screen.
If you type a keyword in an Excel cell, it is automatically replaced with GA10 data. Ex.) To use the instantaneous value of Tag0001 in a project called "Test", type: =DLGDDE|'Test'!tag0001
Yes, by installing the SMARTDAC+ GA10CL on the same PC as the application.
Yes, there is a free upgrade for this. If you need the latest functionality in version R2, purchase the GA10UP upgrade license.
Yes, by purchasing an upgrade license (GA10UP-**). To add multiple functions or channel upgrades, purchase a GA10UP-** license for each. Ex.) To add report printing and MATH: Purchase 1 each of GA10UP-RP and GA10UP-MT
In the GA10 software, you can enter licenses more than once. Each time you enter a license, functions or channels are added.
It automatically prints trends and lets you customize their layouts. Depending on the settings, it can output to Excel or PDF.
With a 32-bit OS, the report printing function has a limited recording duration and number of recording tags. We recommend a 64-bit OS for this instrument. See the general specifications for details.
For general use, 2 GB. If using the report printing function, increase this according to the number of recording tags and recording interval. See the general specifications for details.
Yes, by using the viewer (report printing option not required). However, you cannot customize the layout.
The MATH function lets you perform real-time computations with data from measurement channels. Ex.) For unit conversion, you can multiply all values by 1000.
No. This is not supported because the times and acquisition timings differ between instruments.
The OPC-UA server function lets you use data measured by the GA10 on SCADA and other upstream database systems.
No. Create a separate normal project. For details, see the user's manual (IM 04L65B01-01EN).
To communicate via OPC-UA, you must have a certificate for authorization called a "server certificate." If you have a certificate, install it on the GA10. If you do not have a certificate, you can create and install one that is signed by th...
Do the following, and then register the device with the "Register Device" button under "Devices List." Make sure the device name input on the tool is the same as the file name. Make sure the definition file is saved in the spe...
First launch GateWT for GA10, then register GateWT for GA10 with the Register Device button under Devices List.
1024 × 768 dots or more. 1680 × 1050 dots is the highest that has been operationally verified. There's no particular limit, so please try the trial version.
You can use dual monitors on PCs that have the server and client installed.
Use GateWT for GA10. You can download free of charge it from our website. *Log-in Required
You can transfer them by exporting the projects (in units of acquisition and recording) and then importing them. For details, see section 3.3.1, “Creating a Project in Detail Settings Mode” in the data logging software user's manual (...
Absolutely. However, note that if you have more than 4 GB of memory, you'll need to use a 64-bit OS for it to have any effect. If you're going to use more than 4 GB of memory, use a 64-bit OS and the 64-bit version of the software.
Q: On GateWT for GA10, when I press the Save button, Error "E211 Cannot write to file" appears. Also, when I try to register GateWT for GA10 on the SMARTDAC+ GA10, when I press the Register Device button, Error "E3020 Server can not re...
No. Your DAQStudio license includes /CG. However, you do need to download it from a separate website.
Yes. The alarm list screen displays the most recent 1000 alarms that occurred since data acquisition started.
No. It only displays the 1000 most recent logs between the time the user logged in and then logged out.
No. Once an admin password is registered, it cannot be returned to an unregistered state.
It does, starting with version 2.02. An audible alarm sounds on the PC as a communication error. You are notified of the break when the ACK (Acknowledge of Device Communication Interference) icon blinks, and by the communication status icon on the pr...
The following functions are available. Notification of Alarms and Communication Errors with Sound (section 6.6.2) Viewing the Log (section 6.10) Email Event Setting (Send Conditions: Comm. Status [Communication Disconnect], [Communication Recove...
For the GA10 there is the GA10 and a client function-only GA10CL. When installing the GA10 client software, download GA10CL. *Log-in Required ...
Yes. To send to multiple recipients, separate the addresses with a semicolon " ; ".
Yes. The "number of input channels" on the GA10 is the number of channels that are input to the GA10. When logging an instrument's MATH and communication channels on the GA10, add the number of those channels.
The default password for general users is blank. After the general user logs in (with no password), he or she can set up a new password by selecting User > Edit.
The alarm doesn't sound with version R3.03.01 or earlier. You can update to the latest version, or do the following: 1) In Easy Setting mode, click the Details button to switch to detailed setting mode. 2) Display the Tag setting screen, then cha...
We recommend using the default installation destination. Don’t install to the desktop or other user folders.
The category differs depending on the suffix codes. If neither the MATH (/MT) nor custom display (/CG) are added, it's category 3. If either MATH (/MT) or the custom display (/CG) are added, it’s category 4.
Yes. Create a definition file using the Modbus device definition file creation tool, and connect. For information on creating Modbus device definition files, see the GA10 user’s manual.
Yes. Connect the WT1800 via GateWT for GA10 (free). If you are able to change the WT1800E command type, change it to WT1800 compatible, and then connect via GateWT for GA10. If you can't change the command type, connect using Modbus. See “R...
Can I clear the SMARTDAC+ GA10 alarm sound?
(ns-faq-ga10-15063-setting)
Yes. Click Operation > Alarm sound, and then clear the check mark. See section 6.6.2, "Notification of Alarms and Communication Errors with Sound" in user’s manual IM 04L65B01-01EN. ...
Can I change the SMARTDAC+ GA10 alarm sound?
(ns-faq-ga10-15064-setting)
Yes, in version 3.03.xx or later you can set each alarm individually. You can register up to twenty .mp3 format alarm sounds.
In the data acquisition parameters, under “Data time," you can select "Use PC time" or "Use instrument time." See section 12.2, question 12: “What is the difference between setting the Data time to PC time and set...
Please check the version of the GA10. You can connect the GM10 if the GA10 is version later than R2.01.01. If you have a GA10 of version of R1.01.02 or earlier, you can download an upgrade at the URL below. SMARTDAC+ Microsite ...
The message below is displayed in the popup. Follow the prompts to set the learning period. "M1033 Cannot learn again because the specified period is short. Please set that the time from the start of the period to the end of the period exceeds ...
Set the monitor interval to 10 seconds or more. See also "3.3.6 Configuring the Anomaly Detection Function" and "Behavior of the anomaly detection function 'analysis error'" in the user's manual. ...
The communication port may be closed due to virus detection software or your internal network security. Please contact your IT administrator.
GateSushi always retains the most recent setting data.
Follow the prompts to set the learning period. "M1033 Cannot learn again because the specified period is short. Please set that the time from the start of the period to the end of the period exceeds the following. [Monitor interval] x [Number o...
The tag name (Sensor tag) is updated at regular intervals. If you want to update quickly, restart the Sushi Sensor.
The status appears on the right side of the monitor interval display on the trend graph screen. "Detection" indicates that the system is detecting anomalies. User’s Manual IM 04L65B01-01EN ...
The Anomaly Detection function learns the collected data and recognizes the range of learned data as normal. Data outside of that range is judged as an anomaly.
Yes, with the math function (/MT) option. Set the formula for calculating the anomaly detection score (HealthScore), set the low alarm (alarm value: less than zero) in the formula, and then set the conditions for sending email when the alarm status o...
Yes. User’s Manual IM 04L65B01-01EN
[GA10] Can GateSushi (/SU) set alarms?
(ns-faq-ai-ga-20103-spec)
Yes, GateSushi function (/SU) can set 4 levels of alarms per Sushi sensor. The /MT option is not required. The alarm value can be changed even during acquisition. User’s Manual IM 04L65B01-01EN ...
The anomaly detection function is a standard function. Customers who have already purchased an older model can upgrade for free.  GA10 Data Logging Software (log-in required) ...
When using anomaly detection, set 10 seconds or more for the monitor interval. If you set less than 10 seconds, anomaly detection is not run. User’s Manual IM 04L65B01-01EN ...
The anomaly detection function is run at the display group level. Up to 50 channels (tags) can be assigned to one display group.
Not relearn during detection. If the normal data changes, let the anomaly detection function learn again.
The anomaly detection function (AI) learns from normal data derived from regular operations and automatically creates a criterion for anomalies.
You can choose one of two learning periods: ・[When the period has not been specified (initial values)]  ・[When the period has been specified]. [When the period has not been specified (initial values)]: When anomaly detection starts, it learns f...
No. Anomalies can be detected only from the data being acquired.
The learning period is determined by the monitor interval and the number of tags in the display group. The appropriate learning period is set as the initial value based on the following formula: Monitor interval x No. of tags in the display group x ...
Up to 1000. GA10 General Specifications 'GateSushi function (/SU)'
GateSushi (/SU) is an optional paid function. GA10 General Specifications 'Model and Suffix Codes'

Downloads

동영상

Overview:

GA10 is PC-based data logging software for monitoring and recording data by connecting to devices distributed in a factory. Now with an AI-based Anomaly Detection function, the AI notifies you of anomalies before equipment abnormalities occur.

기술 및 솔루션, 요꼬가와에 대한 자세한 정보를 찾고 계십니까?

견적 및 기술문의

Top