All-in-One Digital SMART pH/ORP Sensor FU24F

FU24F는 까다로운 pH 어플리케이션을 위한 내화확성 PPS40GF 바디로 제조된 디지탈 스마트 pH/ORP 센서입니다.

특히 압력이나 온도가 변동하는 거친 환경에서 매우 유용합니다. 이러한 공정은 빈번한 압력, 온도 변동의 영향으로 공정 유체가 센서 안팎으로 움직이기 때문에 센서 수명을 단축시킵니다. 그 결과 표준 전해질의 빠른 탈염 및 희석이 발생하여 기준 전압이 변경되어 표류 pH 측정이 발생합니다. 

Yokogawa의 특허받은 Bellow 디자인 컨셉은 FU24F전극에 통합함으로써 강력한 압력 보상 메카니즘이 생성됩니다, 빌트인 bellow는 외부 압력과 즉각적인 내부 압력의 평형을 보장하여 센서가 외부 압력 변화에 거의 영향을 받지 않게 합니다. bellow 장력으로 인한 약간의 과압으로 유체 유입을 방지하고 센서에서 양이온 흐름을 유지합니다.

Details

  • Solid Platinum ORP/LE electrode for accurate simultaneous pH and ORP measurements
  • Integral Pt1000 element for enhanced pH accuracy
  • Extended life time by saturated Ag/AgCl reference system with double junction combined with ion-trap, and porous PTFE reference diaphragm
  • Easy setup by sensor specific characteristics stored in the sensor itself
  • Simple maintenance by comprehensive design
  • Available in two versions, a robust dome shape model for applications with a limited amount of solids, and a flat surface model for applications in which solids are a considerable component
  • IP67 M9 Cable Connection
  • CE, ATEX, CSA and FM Approval. However *Can only be used General Purpose at this time, because FLXA21 SENCOM™ module and SPS24 Interface box are pending ICECx, ATEX, FM and CSA approval*

 

SPS24 PC Configuration and Calibration Software

WU11 Connection Cable

The WU11 interconnection cable is specified for reliable transfer of digital signals between the SENCOM™ sensors and Yokogawa FLXA™ analyzer. It is espically designed to be installed in a heavy industrial environment. The cable is water proof, IP67, allowing it to be submerged as a whole. The cable has a wide temperature operation range which is sufficient for most of the applications. The materials used for the cable are flame retardant to resist the spread of fire.

  • Double shielding to protect connected devices for interference from high voltages and currents
  • Available in four different lengths. Long cable runs up to 100 m (328 ft) are possible
  • Easy connection to a SENCOM™ pH Sensor by one 5- pins molded connector, and to the analyzer by 5 wired pins
  • Flame retardant recognized by UL (fileno. E124763) and CSA (fileno. LL105324)
  • IP67
  • Operating temperature from - 40ºC up to + 85°C (-40ºF up to +185°F)

 

자료실

Overview:

There are a number of suppliers of oil and fat products used for edible purposes. These products include, but are not limited to olive oil, peanut oil, soybean oil, sunflower oil, lard, shortening, butter, and margarine. The raw materials for these products include animal by-products, fleshy fruits (palm and olive), and oilseeds. 

Industry:Food and Beverage

Overview:

Optimizing four key factors will decrease pH sensor costs and optimize process control and overall plant efficiency.

Overview:

By understanding what causes the difficulties in pH measurements and having the proper equipment, stable and accurate pure water pH measurement can be accomplished.

The WU11 is to connect the SA11 to the FLXA402, UM33A-S, SMARTDAC+ or any other HOST system. WU11-…-V: for FU20F, FU24F, SC25F, and IB100 WU11-…-S: for SA11, BA11, IB100, and –VS sensors

Downloads

동영상

Overview:

The FU24 is an all-on-one pH and ORP sensor made with a chemical resistant PPS 40GF body for harsh pH applications. It is particularly useful in applications with fluctuating pressure and/or temperature. These processes shorten sensor life because the process fluids move in and out of the sensor under influence of frequent pressure and/or temperature fluctuations. This results in fast desalting and dilution of the reference electrolyte which in turn changes the reference voltage causing a drifting pH measurement.

기술 및 솔루션, 요꼬가와에 대한 자세한 정보를 찾고 계십니까?

견적 및 기술문의

Top