Sistema Automático de Transferencia de Custodia para el Gas Criogénico Transportado por Camiones


Many different types of gases are consumed in industries as varied as chemicals, food & beverages, and medical. These gases are normally delivered in liquid form by trucks and dispensed at the customer site. Although the flow volume of cryogenic liquefied gas is used for billing purposes, it is not easy to accurately measure this because the gas is always at saturation temperatures. Also, gathering billing data from each truck without delay is becoming more difficult because each truck needs to deliver gases to more customers at increasingly distant locations as demand increases.

Cryogenic Gas System Configuration

System Configuration

Expected Benefits

  • Robust system resistant to the constant vibration in trucks
  • Auto dispense system while monitoring the appropriate liquefied gas temperature
  • Highly accurate cryogenic gas metering using a cryogenic version vortex flowmeter + FOUNDATION fieldbus™: all digital technology
  • Auto compensation of gases to the base temperature using a density table loaded onto controllers
  • Auto e-mailing of daily reports for all dispenses to office via GSM/GPRS
  • Web-based HMI at remote site for trend view, upload, and setup of daily report

Process Description

Automatic custody transfer system

Automatic custody
transfer system

When the truck driver presses the start button, the controller starts a pump to circulate liquefied gas for cooling down the flowmeter. Liquefied gas is then dispensed to the site tank. Data of the flow volume measured by the cryogenic version vortex flowmeter, temperature, and pressure are acquired by the controller via FOUNDATION fieldbus. These flows are compensated to base temperature (15°C) from the current temperature using gas density tables (N2, O2, CO2, Argon) by selecting the gas type at a local HMI. On completion of each dispense, the dispensed flow data is saved in the controller and a daily report is created at the end of the day by compiling all the dispenses. Daily reports are automatically e-mailed via wireless communications to the office for billing purposes.


Application Solutions

Yokogawa provides a sophisticated and highly accurate automatic custody transfer system for cryogenic gas delivery. The following features are provided by combining the STARDOM "FCJ" controller, the DY cryogenic version vortex flow meter, the pressure transmitter, temperature transmitter, and a local display.

Liquefied gas dispensing

  1. When the truck driver presses the start button, the controller starts a pump to circulate liquefied gas through the pipe until the temperature falls low enough for single-phase liquid flow. If this can not be achieved within a given time frame, the controller stops the pump, displays an "error" on the local HMI, and returns to be idle.
  2. When the temperature is low enough, the controller opens the valve and dispensing starts. Until the flow stops, the controller totalizes the flow volume and saves this data. At all times, the temperature is monitored. If it goes too high, the controller displays an error message on the local HMI.

Flow volume measurement
Yokogawa DY cryogenic version vortex flowmeter covers process temperatures as low as -200°C with high accuracy (liquid: ± 0.75%). Measured data is transmitted to the controller via FOUNDATION fieldbus, all-digital technology, so that accuracy is not degraded through A/D conversion.

Flow correction
Flow correction for several gases can be performed in the controller by selecting the gas type on the local HMI. Temperature density tables (N2, O2, CO2, Argon) are loaded onto the controller in CSV format. When the gas type is selected on the local HMI, a Java application on the controller loads the corresponding CSV file and sets the data as arrays to an IEC function block. This IEC function block compensates the flow volume to the base temperature. Thanks to the combination of IEC and Java applications, flow correction for different types of gases does not require application modification.

Report file creation
Each time dispensing is completed, the corrected/uncorrected flow and temperature, pressure data are saved in an Excel compatible CSV file in the controller's compact flash memory. At the end of the day, a report file is created by compiling all the day's dispensing files.

Report file transmission
For billing purposes, the created daily reports are e-mailed to an office via GSM/GPRS or some other type of wireless communications. Also, these reports can be uploaded to a PC using the FTP function and opened in Microsoft Excel.

Local HMI
The operator interface is connected with the controller on the truck via a serial link. The operator can monitor the corrected total flow, temperature, sequence status (idle, cooling, dispensing, finished), and alarms on the main display and scroll through detail pages such as uncorrected total flow, uncorrected/corrected flow, uncorrected/corrected cumulative total, number of dispenses, and density. Parameters such as pump pressure, cooling timeout, and K Factor can be also set.

Web-based HMI
The compensated flow and temperature trends can be monitored on a Web browser at a remote site by accessing the controller's URL. Logging settings and report files configurations can be set on a Web browser as well.


Automatic custody transfer system in truck

Automatic custody transfer
system in truck

Yokogawa ensures the accurate flow measurement of liquefied gas by employing an all-digital FOUNDATION fieldbus based communication approach along with cryogenic gas dispensing controls. By embedding PC oriented functions such as e-mail, FTP, and the Java runtime environment onto the hybrid controller, an automatic custody transfer system can be provided. This eliminates the need to install a COTS PC on a truck, where it would be subject to constant vibration. The following benefits are achieved:

  • Reduced maintenance costs by installing robust controllers on trucks
  • Reduced communications costs by sending reports via e-mail once a day or only when required
  • Low-cost expansion by using unlimited Web based HMI at all locations


Productos y Soluciones Relacionadas


Empezó como un proyecto de Sistema Flexible de Técnicas Avanzadas (FAST), el FAST/TOOLS hoy en día es un paquete completo y totalmente integrado de aplicaciones SCADA. Potente y flexible, el FAST/TOOLS sirve en instalaciones que van desde procesos unitarios de 50 puntos a multimillonarios puntos de producción offshore y sistemas tuberías que se extienden a lo largo de miles de millas. 

FCJ All-in-one PLC/RTU

The brick type model FCJ autonomous controller fulfills the basic requirements of the utility control. It also provides the reliability for the SCADA communication with network redundant capability.

Low Power Consumption Autonomous Controller (FCN-RTU)

The low power consumption model of the field control node (FCN) autonomous controller meets the demanding requirements at inhospitable remote locations which lack power.

Process Control PLC/RTU

From process plants to remote locations, our process control PLC and Remote Terminal Unit (RTU) help users maximize operational excellence.

Sistemas SCADA

Tradicionalmente utilizados para el monitoreo y control de la infraestructura como son los ductos y servicios públicos, los sistemas de control de supervisión y adquisición de datos (SCADA) han extendido sus beneficios a través de las industrias de proceso. Su evolución hacia las soluciones de automatización y administración de información de todas las Empresas ha mejorado aún más su valor para los usuarios.




¿Tiene Dudas?

Contacte a un Experto de Yokogawa y conozca como podemos ayudarle a resolver sus retos.