Multipoint Monitoring of Boiler Temperature

For data recording and management by the DX in applications involving multipoint measurement such as monitoring of temperature in a boiler, there is a convenient remedy to the problem of too few inputs.

Expanded Inputs with DX + MW100

  • Connect DAQMASTER MW100 via Modbus/TCP. Combined with the inputs of the DX main unit, this offers up to 348 points of recording.
  • These 348 inputs are concentrated onto a single DX allowing easy centralized control, and simpler data management and monitoring.

Productos y Soluciones Relacionadas

Button Operated DX1000/DX2000

The Daqstation DX1000/2000 series is a data acquisition system with display. Its HMI supports custom graphics for industry applications, audit trail and advanced security conforming to FDA 21CFR Part 11.

Standalone MW100

For industrial DAQ applications, the MW100 offers scalability and can operate either standalone or integrated as a node within a larger automated system including SCADA or DCS.

×

 

 

¿Tiene Dudas?

Contacte a un Experto de Yokogawa y conozca como podemos ayudarle a resolver sus retos.

Top