Name: DP320-8x (ODWOŁANE)
Brand: Yokogawa
SKU: dp320-8x

FAQ

An exclamation point "!" is displayed on the DAQ32Plus hard disk icon.

(ns-faq-daqworx-13052-spec)

FAQ

The DA100 and DAQ32Plus are connected, but I can't record.

(ns-faq-daqworx-13051-connect)

FAQ

Can I automatically convert measured data files to Excel on DAQ32Plus?

(ns-faq-daqworx-13053-spec)

FAQ

I want to set an IP address on the DA100 Ethernet module by using DAQ32Plus. When I place the dip switches in Config mode and press "Check," error E3339 appears. How should I enter settings? My PC uses Windows 7, with the latest version of DAQ32Plus.

(ns-faq-daqworx-13064-connect)

FAQ

Can I monitor and record on two DA100s using DAQ32Plus?

(ns-faq-daqworx-13038-spec)

FAQ

When purchasing a DAQ32Plus upgrade license (WX102UP), what sort of license number is required?

(ns-faq-daqworx-13065-other)

FAQ

How can I perform strain initial balancing on DAQ32Plus?

(ns-faq-daqworx-13050-spec)

FAQ

How can I view historical data files (*.daq) and reports (*.rbi) from DAQ32 and DAQ32Plus on a Windows 10 PC?

(ns-faq-daqworx-13078-spec)

FAQ

What communication formats are compatible with DAQ32Plus?

(ns-faq-daqworx-13040-connect)

FAQ

I set the same IP address on the DR241 and PC to connect via Ethernet, but there's no communication.

(ns-faq-daqworx-13039-connect)

FAQ

How many data can be displayed along the time axis in DAQ32Plus' real time trend display?

(ns-faq-daqworx-13049-spec)

FAQ

I've set the host name and port number on the DAQ32Plus client, but am unable to connect.

(ns-faq-daqworx-13043-connect)

FAQ

Can I view DAQ32Plus real time trends on multiple PCs?

(ns-faq-daqworx-13046-spec)

FAQ

When assigning DAQ32Plus groups, can I arbitrarily sort channels independently of the sorting on the DA100? Also, can I register channels to multiple groups?

(ns-faq-daqworx-13048-spec)

FAQ

How many groups, and how many channels per group can be displayed in the DAQ32Plus real time trend screen? Also, can I set the display span on the DAQ32Plus side only?

(ns-faq-daqworx-13047-spec)

FAQ

I'm using DAQ32Plus. I set an alarm on the DARWIN (DC100). When the measured value rises, an alarm appears in the DARWIN (DC100) screen, but in the DAQ32Plus screen the alarm stays green (doesn't turn red).

(ns-faq-daqworx-13067-soft)

FAQ

Can DAQ32 monitor 30 channels worth of data?

(ns-faq-darwin-8023-spec)

FAQ

When connecting the DA100 and monitoring trends, the PC's time differs from the time displayed in the trends.

(ns-faq-daqworx-13045-spec)

FAQ

DAQ32Plus can't communicate with the DA100 via Ethernet.

(ns-faq-daqworx-13042-connect)

FAQ

When I connect the DA100 via RS-232-C and use DAQ32 Plus to acquire data, the performance bar goes to OVER and I lose data. What should I do?

(ns-faq-darwin-8027-spec)

FAQ

Can I forcibly turn the alarm output modules ON/OFF from a PC regardless of any input data alarms?

(ns-faq-darwin-8055-spec)

FAQ

I’m trying communication from a RS232C communication module (DT300-31) to a recorder using DAQ32 software, but *E0401 Communication error* is displayed and communication fails.

(ns-faq-darwin-8068-connect)

FAQ

What is the temperature measurement interval of the universal module's RJC (INT)?

(ns-faq-darwin-8051-spec)

FAQ

When I add a module and configure the system, are the settings initialized?

(ns-faq-darwin-8058-spec)

FAQ

When measuring voltage with a universal input module or DCV/TC input module, what is the limit value where an overrange occurs?

(ns-faq-darwin-8029-spec)

FAQ

Does DARWIN support Windows XP?

(ns-faq-darwin-8017-spec)

FAQ

What internal processing occurs of the DI input (non-voltage contact input) from the universal input module and DCV/TC/DI modules?

(ns-faq-darwin-8050-spec)

FAQ

When I changed to Windows 7, I couldn't change the IP address of the Darwin Ethernet module. What should I do?

(ns-faq-darwin-8018-setting)

FAQ

Can I connect the main unit to a company network?

(ns-faq-darwin-8019-connect)

FAQ

When I acquire DI input with the BFD32 and perform statistical computation (averaging) on the Viewer software, I get computation errors 0 and 1.

(ns-faq-darwin-8004-spec)