Name: DR241 (ODWOŁANE)
Brand: Yokogawa
SKU: dr241

Ogłoszenie: Ten produkt został wycofany Zobacz ten produkt zastępczy:

Touch Screen Paperless Recorder GX10/GX20

Model Name: DR241

FAQ

What is the recording lifespan of the DR241 (30 ch) ink ribbon?

(ns-faq-darwin-8043-spec)

FAQ

With logging recording on the DR232 and DR242, what is the maximum number of channels I can use if the logging interval is set to 1 minute?

(ns-faq-darwin-8041-spec)

FAQ

Does the chart paper that comes standard with the DR230 have a time band of 10 mm or 25 mm?

(ns-faq-darwin-8044-spec)

FAQ

What is the type and lifespan of the battery that retains the DR240 main unit settings?

(ns-faq-darwin-8045-spec)

FAQ

How long would it take to copy multiple data files in the DR series' RAM (512 KB) to a floppy disk?

(ns-faq-darwin-8034-spec)

FAQ

After loading data to floppy disk, if I reopen it, the date and time I reopen it is recorded. Can I record the date/time of measurement?

(ns-faq-darwin-8040-spec)

FAQ

What are the allowable voltage between channels and common mode voltage when connecting batteries (5 V or less) in series and measuring voltage at both poles of each battery on the DR232?

(ns-faq-darwin-8046-spec)

FAQ

Can I record all data if the scan interval on the DR is 0.5 seconds?

(ns-faq-darwin-8039-spec)

FAQ

How can I clear DR digital printout (including the date)?

(ns-faq-darwin-8035-setting)

FAQ

If I'm doing manual printing on the DR, is the data printed out at the moment it is triggered (including for key operation)?

(ns-faq-darwin-8036-spec)

FAQ

When does the DR scale printout occur?

(ns-faq-darwin-8038-spec)

FAQ

I can't set the data length for loading data into memory on the DR.

(ns-faq-darwin-8037-spec)

FAQ

What is the stipulated current value of the DCV/TC input module?

(ns-faq-darwin-8054-spec)

FAQ

Can I forcibly turn the alarm output modules ON/OFF from a PC regardless of any input data alarms?

(ns-faq-darwin-8055-spec)

FAQ

What internal processing occurs of the DI input (non-voltage contact input) from the universal input module and DCV/TC/DI modules?

(ns-faq-darwin-8050-spec)

FAQ

What is the temperature measurement interval of the universal module's RJC (INT)?

(ns-faq-darwin-8051-spec)

FAQ

Is there a limit on the extender modules?

(ns-faq-darwin-8052-select)

FAQ

Is the integral value on the input pulse module the calculated scale value?

(ns-faq-darwin-8060-spec)

FAQ

I’m trying communication from a RS232C communication module (DT300-31) to a recorder using DAQ32 software, but *E0401 Communication error* is displayed and communication fails.

(ns-faq-darwin-8068-connect)

FAQ

When loading data on a PC via RS-232C communication, is a horizontal parity check performed?

(ns-faq-darwin-8047-spec)

FAQ

When the measurement mode is 20 k and the gauge method is 4 gauge, the range is －5000 µε to +5000 µε(microstrain), but I can measure up to ±20000 µε. What is the accuracy?

(ns-faq-darwin-8062-spec)

FAQ

When the counter is up, does it go back to zero?

(ns-faq-darwin-8061-spec)

FAQ

I'm using a previously delivered DARWIN, but can I use an Ethernet module that supports a new style?

(ns-faq-darwin-8059-spec)

FAQ

When I add a module and configure the system, are the settings initialized?

(ns-faq-darwin-8058-spec)

FAQ

What do "initial balancing" (EXEC) and "initialization" (INIT) of the strain input channels mean?

(ns-faq-darwin-8010-term)

FAQ

What is the difference between RELATIVE and ABSOLUTE in the timer settings?

(ns-faq-darwin-8006-spec)

FAQ

I do a burnout with the burnout setting command (XB) and set +OVER, but even when one side of the thermocouple is open the burnout check doesn't work.

(ns-faq-darwin-8005-spec)

FAQ

When outputting measured data, what happens if I specify channels not identified by the FM command?

(ns-faq-darwin-8002-spec)

FAQ

How many digits are displayed after the decimal point when applying a moving average?

(ns-faq-darwin-8001-spec)

FAQ

What are the burnout determination criteria (just for thermocouples)?

(ns-faq-darwin-8007-spec)

FAQ

What does the specification, "Signal supply rating 15 VDC, 30 mA" mean?

(ns-faq-darwin-8008-spec)

FAQ

Can I connect the main unit to a company network?

(ns-faq-darwin-8019-connect)

FAQ

When I changed to Windows 7, I couldn't change the IP address of the Darwin Ethernet module. What should I do?

(ns-faq-darwin-8018-setting)

FAQ

Does DARWIN support Windows XP?

(ns-faq-darwin-8017-spec)

FAQ

When measuring voltage with a universal input module or DCV/TC input module, what is the limit value where an overrange occurs?

(ns-faq-darwin-8029-spec)

FAQ

Why aren't thermocouples included in certificates of results?

(ns-faq-darwin-8014-other)

FAQ

When I acquire DI input with the BFD32 and perform statistical computation (averaging) on the Viewer software, I get computation errors 0 and 1.

(ns-faq-darwin-8004-spec)

Instrukcje obsługi

Szukasz dodatkowych informacji na temat naszych pracowników, technologii i rozwiązań?

Kontakt

DR241 (ODWOŁANE)

Zasoby

Downloads

Instrukcje obsługi

Oprogramowanie

Informacje techniczne

MSDS/SDS