SE Asia SG   
UM33A-S SENCOM HMI Type
Liquid Analyzers

UM33A-S SENCOM HMI Type

 
The UM33A-S connects to sensors which are connected to a digital SENCOM Smart Adapter, model SA11. The main functions of the UM33A-S are displaying the measured values of the sensor and calibrating the sensor.

Details

Overview

SimplicitySENCOM system: UM33A-S + SA11

  • Easy-to-read, 14-segment large color LCD display
  • Navigation guide & navigation keys
  • Indication and control of the calibration function included in the Smart Adapter
  • Power supply for SENCOM: 3.6 - 5.5 VDC
  • Compact design of 65-mm depth

Reliability

  • 3 year warranty*1
  • RoHS/WEEE
  • NEMA4*2/IP66 front panel

*1: The 3 year warranty extendes 36 months
*2: Hose-down test only

Specifications

ITEM UM33A-S
Input Input type pH, Conductivity
PV data display   14-segment, 5 digits LCD display
Digital outputs (option) Number 3 
Function PV High, PV Low, etc
Retransmission Number 1
Type pH, Conductivity
Other specifications Power supply 100 to 240 VAC (+10%, -15%) or 24 VAC/DC (+10%, -15%) (option)
Power consumption Max 15 VA
Mass Max 0.5 kg

Resources

What power supply does the UM33A-S have?
(an-um33a-s-01)
Standard the UM33A-S has a 100-240VAC power supply. Optional it is possible to order the 24VAC/DC power supply. ...
How to install the UM33A-S?
(an-um33a-s-03)
The UM33A-S is panel mounted. Tighten the screws with appropriate tightening torque within 0.25 Nm, otherwise it may cause the case deformation or the bracket will be damaged. Make sure that foreign materials do not enter the inside of the instrument...
What is the option /CV for?
(an-um33a-s-04)
This is to prevent anybody touching the power terminals (100-240VAC or 24VAC/DC).
What compliance approvals does the UM33A-S have?
(an-um33a-s-06)
Electro Magnetic Compatibility (CE, KC, ACMA): 61326-1 Class A, Table 2, EN 61326-2-3 EN 55011 Class A, Group 1 EN 61000-3-2 Class A EN 61000-3-3 Safety: IEC/EN 61010-1 (CE), IEC/EN 61010-2-201 (CE), IEC/EN 61010-2-030 (CE); CAN/CSA C22....
How can I check if there are any warnings and what they mean?
(an-um33a-s-07)
In case of a warning, the Event indicator will be lit, and by pressing the DISP key the Warning Code and scrolling message will be indicated. In case of more than 1 warning, the belonging Event indicators will be lit but only the Warning Code belongi...
Does the UM33A-S have a HOLD function and if yes how does it work?
(an-um33a-s-08)
Yes, it does. HOLD Display Active when HOLD function is set ON (active) in case of Calibration and/or Manual HOLD. LOCK lights up to indicate HOLD mode. HOLD during calibration When calibration is active the mA output can be set in a HOLD last (...
How well does the display of the UM33A-S work at low ambient temperatures?
(an-um33a-s-11)
The display update cycle time can be changed to increase readability at lower temperatures.
Is there a password protection on the UM33A-S?
(an-um33a-s-12)
It is possible to set a password in the UM33A-S. This password also can be changed when needed. When the password is forgotten it is no longer possible to access the device. Also, once activated it is not possible to de-activate the password.
How can the SA11 be connected to the terminals of the UM33A-S?
(an-um33a-s-02)
Please see the drawing below of the terminal arrangement of the UM33A-S. To guarantee EMC- and Common Mode noise behavior of SA11, the FG terminal (#306) must be interconnected to Power supply Earth terminal (#112) by separate wire. Use WU11-S type c...
What are the main functions of the UM33A-S?
(an-um33a-s-05)
The main functions of the UM33A-S are: Displaying calculated main parameter values and WARN/ERROR statuses from SA11 Trigger calibration process of the sensor Generating mA process signal Built in power supply for the SA11 IP66/NEMA4X at the f...
Where are the calibration limits set when using the UM33A-S with the SA11?
(an-um33a-s-10)
The calibration limits are set in the SA11 and will be used during calibration and will generate an error when applicable. Limits can be set by using FieldMate or a FLXA402.
How will error configuration take place in SA11?
(an-sa11-13)
Default pre-programmed, see Appendix in Instruction Manual Configurable by expert HOST (= Yokogawa device FLXA402, Fieldmate, NOT UM33A-S)  Remark: some error configuration depends on the type of sensor that is connected. This will be autom...
Does the UM33A-S with SA11 also measure ORP / REDOX?
(an-um33a-s-09)
The PH21 does not have a liquid Earth, hence does not measure ORP. When using a FU20 or FU24 ORP/REDOX will be measured, but will not show up in the display. Error messages can be configured for ORP and will give warnings. ...
In SENCOM, which cables should be used for what?
(an-vp-sensor-06)
The WU11 is to connect the SA11 to the FLXA402, UM33A-S, SMARTDAC+ or any other HOST system. WU11-…-V: for FU20F, FU24F, SC25F, and IB100 WU11-…-S: for SA11, BA11, IB100, and –VS sensors

Downloads

Brochures
Instruction Manuals
General Specifications
Technical Information
Drawings

Looking for more information on our people, technology and solutions?

Contact Us
Top