TC10 Temperature Controller

The TC10 is a compact single loop temperature controller with an easy-to-read 3-color LED display. The shallow depth of the controller helps save to space. The TC10 supports easy configuration with codes for quick start-up.

Main Features

  • Compact size: 48 x 48 mm (1/16 DIN), depth of 48 mm + 14 mm (terminals)
  • 3 Dynamic Colors Led Display
  • Universal input: (TC, mV, V, mA, Pt100-Pt1000)
  • 4 Set Points and alarm functions
  • Serial communication : RS-485 Modbus
  • PID control, ON/OFF, Auto-tuning
  • IP65 front panel (when the optional panel gasket is mounted)(optional)

UT130

Compact 1/16 DIN sized easy-to-see Temperature Controller that comes with large (17.5 mm height) 3-digit display. Universal input, "SUPER" overshoot suppress function and dynamic auto tune are standard. Heating/cooling control and RS485 communication are optional features.

UT35A/UT32A

The UT35A and UT32A temperature controllers employ an easy-to-read, 14-segment large color LCD display, along with navigation keys, thus greatly increasing the monitoring and operating capabilities. A ladder sequence function is included as standard. The short depth of the controller helps save instrument panel space. The UT35A/UT32A also support open networks such as Ethernet communication.

UT32A-D

The UT32A-D is a compact digital indicating controller with selectable 2-loop control. It also includes a ladder sequence function.

UT32A-V/C/R

The UT32A-V,-C,-R is an easily configurable single-loop controller for 1/8 DIN sized.

Mid-level UT55A/UT52A

The UT55A and UT52A temperature controllers employ an easy-to-read, 14-segment large color LCD display, along with navigation keys, thus greatly increasing the monitoring and operating capabilities. A ladder sequence function is included as standard. The short depth of the controller helps save instrument panel space. The UT55A/UT52A also support open networks such as Ethernet communication.

Advanced Application UT75A

The UT75A temperature controllers employ an easy-to-read, 14-segment large color LCD display, along with navigation keys, thus greatly increasing the monitoring and operating capabilities. A ladder sequence function is included as standard. The short depth of the controller helps save instrument panel space. The UT75A also support open networks such as Ethernet communication.

【Support Information】New Legislative Framework (NLF) Conforming Products

This is a list of recorder and controller products that support the New Legislative Framework (NLF.)

The SP value is not displayed if you don’t specify a control operation. Assign OP4 to the control output operation.
On burnout, it will be 0 mA. There is no parameter for specifying the output direction.
AL on the front of the TC10 is the alarm lamp. 1 to 4 indicate the status of outputs 1 to 4.
Approximately 2 seconds or less. (63% response when the input changes from 10% → 90%)
Pt100: 150 μA Pt1000: 15.5 μA
No, they’re clamp terminals.
What is the TC10’s warranty period?
(ns-faq-ut-2253-other)
18 months (a year and a half) after shipment from the factory.
Yes, by changing the DP setting from 0 to 1. When you do this, the upper limit range of 1000°C becomes 999.9°C.
How many analog outputs are there?
(ns-faq-ut-2204-spec)
There is 1 analog output.
Yes. Set DISP to nonE.
Set detailed parameter out group o1.F (output 1 function) = r.inP.
Does it support a 2-wire Pt1000 Ω?
(ns-faq-ut-2221-spec)
Yes. Reffer to Specifications
Yes, if the input type is voltage or current.
Can I initialize parameters on the TC10?
(ns-faq-ut-2225-setting)
Yes. On the PASS screen, set “-481.”

Looking for more information on our people, technology and solutions?


Contact Us
Top