This product acts as a battery-powered wireless vibration sensor with the sensor and wireless communication functions integrated in a unit and it is suitable for Industrial IoT (IIoT) applications. XS770A Wireless Vibration Sensor measures vibration (velocity and acceleration) along the X, Y, and Z axes and 3-axis composite in addition to monitoring the surface temperature of the bottom and transmits the measurement data to the host systems via wireless communication. The XS770A can be mounted easily by a screw or a magnet.
The XS770A can be installed in Zone 2 areas, such as petrochemical plants, paint plants, drug plants, where flammable gas or vapor may exist.
XS770A has adopted LoRaWAN. LoRaWAN has excellent sensitivity reception, good radio interference resistance, and offers a communication distance of 10 km or more in an ideal communication environment. This sensor can be installed this sensor anywhere you want over vast area.
The XS770A is compact and has excellent environment resistance characteristics. It can be installed in a plant where wiring is difficult. With a number of sensors, various data can be collected for plant maintenance by early detection and prediction of equipment failure.
Using an Android-based smartphone with NFC (Near Field Communication) interface makes configuration and status monitoring of sensors simple and intuitive.
|WIRELESS SPECIFICATIONS||Communication Protocol||LoRaWAN class A
EU868, AS923, US915, KR920, AU915
|Data Rate||250 to 11000 bps*1|
|Frequency||Available frequency bands vary depending on the country.
Please check General Specifications for details.
|Radio Security||AES 128-bit encryption|
|RF Transmitter Power||Max. 7 dBm|
|Antenna||Built-in Omni-directional antenna|
|POWER SUPPLY SPECIFICATIONS||Battery||Lithium thionyl chloride battery: 1 unit (dedicated product)
Rated voltage: 3.6 V
Rated capacity: 2.6 Ah
|PERFORMANCE SPECIFICATIONS||Measurement||Vibration||Measurement||Acceleration (peak), Velocity (RMS)|
|Axis||X, Y, Z axes and 3-axis composite|
|Range *2||Acceleration: 0 to 130 m/s2 (0 to 13.26 g)
Velocity *3: 0 to 20 mm/s (0 to 0.79 in/s)
|Frequency range||10 to 1,000 Hz (± 3 dB)|
|Accuracy (100 Hz)||X, Y, Z axes : ±10% FS
3-axis composite: ±20% FS
|Range||-20 to 85°C (-4 to 185°F)|
|Update Time||1 minute to 3 days|
|Battery Characteristics||The typical battery life is 4 years in the following conditions.*4
• Update period: 1 hour
• Ambient temperature: 23±2°C (73.4±3.6°F)
(EU868:EU, AS923: Southeast Asia and New
Zealand, US915: North America, KR920: Korea,
|NFC Interface||NFC Forum Type 2 Tag|
|INSTALLATION ENVIRONMENT||Ambient Temperature Limits||Operating: -20 to 85°C (-4 to 185°F)*5|
|REGULATORY COMPLIANCE STATEMENTS||Degrees of Protection||IP66/IP67 and Type 4X*5|
|Explosionproof||ATEX, IECEx, FM|
|PHYSICAL SPECIFICATIONS||Housing Material||For detail, refer to “MODEL AND SUFFIX CODES” in General Specifications.|
|Weight||260 g (0.57 lb)|
|Mounting||Mounting on the measurement target using the screw*6|
*1: Available data rate vary depending on the country.
*2: Peak value of the input vibration. For the relation between the measurement frequency band and measurable range, refer to General Specifications.
*3: The 20 mm/s pk value is equivalent to 14 mm/s RMS when input is based on a sine wave.
*4: Environmental condition such as vibration and the type of the connected device may affect battery life.
*5: Depends on the selected code. For detail, refer to General Specifications.
*6: Can also mount using the magnetic holder supplied as an accessory. Note that, when using the magnetic holder, the vibration measurement frequency band drops.
This software is used to perform the setting and status check of this product via the NFC interface.
|Operating Environment||Item||Recommended System Requirements|
|OS||Android 5.1.1 or higher|
|CPU||Snapdragon 800 or better|
|Resolution||1280 x 720 dots or more|
Looking for more information on our people, technology and solutions?