Single Loop Controllers

Single loop controllers are used in a variety of industrial facilities such as power plants, oil refineries, petrochemical plants, chemical plants, and iron and steel plants.  These controllers receive temperature, flow rate, pressure, and other types of measurement readings from sensors and send corresponding instructions to control elements such as valves in order to maintain these values within a desired range.  Each control loop has its own controller.  Single loop controllers are widely used in industry today to control small plant facilities and serve as back-ups to distributed control systems.

  • YS1700

    The YS1700 Programmable Indicating Controller can be tailored for various applications by running a user program, and offers high reliability thanks to Yokogawa's proprietary technology, user friendliness, and expandability.

    Daha Fazla Gör
  • YS1500

    The YS1500 Indicating Controller incorporates fundamental control functions required for PID control. Necessary functions can be selected in accordance with the user's purpose.

    Daha Fazla Gör
  • YS1350/YS1360

    The YS1350 is a manual setter that allows for manually outputting setting signals to controllers and the like. The YS1360 is a manual setter that allows for manually outputting operation signals to operation terminals.

    Daha Fazla Gör
  • YS1310

    The YS1310 Indicator with Alarms is an input indicator that has alarms with two inputs. Two loops can be displayed simultaneously. A high limit alarm, low limit alarm, high-high limit alarm, and low-low limit alarm can be generated for each of the two inputs, and the AND connection or OR connection of arbitrary alarms can be output from a total of 6 contacts.

    Daha Fazla Gör
  • YS110

    If a YS1360, YS136, YS1500, YS150, YS1700, or YS170 instruments fails, the YS110 Standby Manual Station can be used to output a 4 to 20 mA signal to the control valve actuator instead of the instruments.

    Daha Fazla Gör
  • YSS1000

    The YSS1000 setting software (hereinafter referred to as the YSS1000) is package software to configure the functions of the YS1000 series (hereinafter referred to as the YS1000) devices.

    Daha Fazla Gör
  • YS80 Series Rack Instruments

    The Style R and Style S models have completely interchangeable I/O specifications, terminal arrays and shapes. They can be replaced with the latest devices just by replacing the internal instruments, leaving the wiring intact.

    Daha Fazla Gör

Kaynaklar

Genel Bakış:

Continuous technology improvement is ongoing in the pulp & paper industry to obtain the best possible performance. The improved plant performance translates to the higher quality improvement and lower cost, and simultaneously environmental friendly plant operation.

Endüstriler:
Genel Bakış:

Automated control of industrial boilers is an excellent application for YS1700 microprocessor-based loop controllers. These instruments can be programmed to perform the operations of plant master, boiler master, fuel and air control with oxygen trim and drum level/feedwater control.

Genel Bakış:

In process control it is not uncommon for systems to be affected by dead times, due to material transfer times. This is evident typically in pipelines. A fluid of density ρ and flow rate w in a section of pipe A the length of d takes the amount of time τ = ρAd/w to cover the whole distance (see Figure 1).

İndirilenler

VİDEOLAR

Ürün İncelemeleri
Genel Bakış:

The YSS1000 setting software (hereinafter referred to as the YSS1000) is package software to configure the functions of the YS1000 series (hereinafter referred to as the YS1000) devices. Writing and reading of parameters and user programs of the YS1000, and PID tuning and monitoring of user programs can be performed through the use of communication.

Haberler

İnsanlarımız, teknolojimiz ve çözümlerimiz hakkında daha fazla bilgi mi arıyorsunuz?

Bizimle İletişime Geçin

En üst