Name: DP320-8x/MLT 停產產品
Brand: Yokogawa
SKU: dp320-8xmlt

常見問題

Can DAQ32 monitor 30 channels worth of data?

(ns-faq-darwin-8023-spec)

常見問題

The DA100 and DAQ32Plus are connected, but I can't record.

(ns-faq-daqworx-13051-connect)

常見問題

How can I perform strain initial balancing on DAQ32Plus?

(ns-faq-daqworx-13050-spec)

常見問題

An exclamation point "!" is displayed on the DAQ32Plus hard disk icon.

(ns-faq-daqworx-13052-spec)

常見問題

I want to set an IP address on the DA100 Ethernet module by using DAQ32Plus. When I place the dip switches in Config mode and press "Check," error E3339 appears. How should I enter settings? My PC uses Windows 7, with the latest version of DAQ32Plus.

(ns-faq-daqworx-13064-connect)

常見問題

How can I view historical data files (*.daq) and reports (*.rbi) from DAQ32 and DAQ32Plus on a Windows 10 PC?

(ns-faq-daqworx-13078-spec)

常見問題

How many data can be displayed along the time axis in DAQ32Plus' real time trend display?

(ns-faq-daqworx-13049-spec)

常見問題

Can I automatically convert measured data files to Excel on DAQ32Plus?

(ns-faq-daqworx-13053-spec)

常見問題

When purchasing a DAQ32Plus upgrade license (WX102UP), what sort of license number is required?

(ns-faq-daqworx-13065-other)

常見問題

I set the same IP address on the DR241 and PC to connect via Ethernet, but there's no communication.

(ns-faq-daqworx-13039-connect)

常見問題

Can I monitor and record on two DA100s using DAQ32Plus?

(ns-faq-daqworx-13038-spec)

常見問題

When assigning DAQ32Plus groups, can I arbitrarily sort channels independently of the sorting on the DA100? Also, can I register channels to multiple groups?

(ns-faq-daqworx-13048-spec)

常見問題

What communication formats are compatible with DAQ32Plus?

(ns-faq-daqworx-13040-connect)

常見問題

I've set the host name and port number on the DAQ32Plus client, but am unable to connect.

(ns-faq-daqworx-13043-connect)

常見問題

How many groups, and how many channels per group can be displayed in the DAQ32Plus real time trend screen? Also, can I set the display span on the DAQ32Plus side only?

(ns-faq-daqworx-13047-spec)

常見問題

Can I view DAQ32Plus real time trends on multiple PCs?

(ns-faq-daqworx-13046-spec)

常見問題

I'm using DAQ32Plus. I set an alarm on the DARWIN (DC100). When the measured value rises, an alarm appears in the DARWIN (DC100) screen, but in the DAQ32Plus screen the alarm stays green (doesn't turn red).

(ns-faq-daqworx-13067-soft)

常見問題

When I connect the DA100 via RS-232-C and use DAQ32 Plus to acquire data, the performance bar goes to OVER and I lose data. What should I do?

(ns-faq-darwin-8027-spec)

常見問題

When connecting the DA100 and monitoring trends, the PC's time differs from the time displayed in the trends.

(ns-faq-daqworx-13045-spec)

常見問題

DAQ32Plus can't communicate with the DA100 via Ethernet.

(ns-faq-daqworx-13042-connect)

常見問題

What is the temperature measurement interval of the universal module's RJC (INT)?

(ns-faq-darwin-8051-spec)

常見問題

Can I forcibly turn the alarm output modules ON/OFF from a PC regardless of any input data alarms?

(ns-faq-darwin-8055-spec)

常見問題

When I add a module and configure the system, are the settings initialized?

(ns-faq-darwin-8058-spec)

常見問題

I’m trying communication from a RS232C communication module (DT300-31) to a recorder using DAQ32 software, but *E0401 Communication error* is displayed and communication fails.

(ns-faq-darwin-8068-connect)

常見問題

What internal processing occurs of the DI input (non-voltage contact input) from the universal input module and DCV/TC/DI modules?

(ns-faq-darwin-8050-spec)

常見問題

Does DARWIN support Windows XP?

(ns-faq-darwin-8017-spec)

常見問題

When measuring voltage with a universal input module or DCV/TC input module, what is the limit value where an overrange occurs?

(ns-faq-darwin-8029-spec)

常見問題

When I changed to Windows 7, I couldn't change the IP address of the Darwin Ethernet module. What should I do?

(ns-faq-darwin-8018-setting)

常見問題

Can I connect the main unit to a company network?

(ns-faq-darwin-8019-connect)

常見問題

When I acquire DI input with the BFD32 and perform statistical computation (averaging) on the Viewer software, I get computation errors 0 and 1.

(ns-faq-darwin-8004-spec)