Name: DR231 停產產品
Brand: Yokogawa
SKU: dr231

通知: 本產品於2015年3月31日停止生產。查看替代產品：

觸控螢幕 GP10/GP20

Model Name: DR231

常見問題

Does the chart paper that comes standard with the DR230 have a time band of 10 mm or 25 mm?

(ns-faq-darwin-8044-spec)

常見問題

What is the recording lifespan of the DR241 (30 ch) ink ribbon?

(ns-faq-darwin-8043-spec)

常見問題

What is the type and lifespan of the battery that retains the DR240 main unit settings?

(ns-faq-darwin-8045-spec)

常見問題

What are the allowable voltage between channels and common mode voltage when connecting batteries (5 V or less) in series and measuring voltage at both poles of each battery on the DR232?

(ns-faq-darwin-8046-spec)

常見問題

How long would it take to copy multiple data files in the DR series' RAM (512 KB) to a floppy disk?

(ns-faq-darwin-8034-spec)

常見問題

With logging recording on the DR232 and DR242, what is the maximum number of channels I can use if the logging interval is set to 1 minute?

(ns-faq-darwin-8041-spec)

常見問題

When I try to change the range on the DR230 hybrid recorder, error code 123 "Attempted to make settings which are not allowed to be made during saving or reading of measured data" appears.

(ns-faq-darwin-8064-setting)

常見問題

If I'm doing manual printing on the DR, is the data printed out at the moment it is triggered (including for key operation)?

(ns-faq-darwin-8036-spec)

常見問題

How can I clear DR digital printout (including the date)?

(ns-faq-darwin-8035-setting)

常見問題

After loading data to floppy disk, if I reopen it, the date and time I reopen it is recorded. Can I record the date/time of measurement?

(ns-faq-darwin-8040-spec)

常見問題

I can't set the data length for loading data into memory on the DR.

(ns-faq-darwin-8037-spec)

常見問題

When does the DR scale printout occur?

(ns-faq-darwin-8038-spec)

常見問題

Can I record all data if the scan interval on the DR is 0.5 seconds?

(ns-faq-darwin-8039-spec)

常見問題

What is the stipulated current value of the DCV/TC input module?

(ns-faq-darwin-8054-spec)

常見問題

Can I forcibly turn the alarm output modules ON/OFF from a PC regardless of any input data alarms?

(ns-faq-darwin-8055-spec)

常見問題

What internal processing occurs of the DI input (non-voltage contact input) from the universal input module and DCV/TC/DI modules?

(ns-faq-darwin-8050-spec)

常見問題

When I add a module and configure the system, are the settings initialized?

(ns-faq-darwin-8058-spec)

常見問題

What is the temperature measurement interval of the universal module's RJC (INT)?

(ns-faq-darwin-8051-spec)

常見問題

Is there a limit on the extender modules?

(ns-faq-darwin-8052-select)

常見問題

When the counter is up, does it go back to zero?

(ns-faq-darwin-8061-spec)

常見問題

When loading data on a PC via RS-232C communication, is a horizontal parity check performed?

(ns-faq-darwin-8047-spec)

常見問題

I’m trying communication from a RS232C communication module (DT300-31) to a recorder using DAQ32 software, but *E0401 Communication error* is displayed and communication fails.

(ns-faq-darwin-8068-connect)

常見問題

When the measurement mode is 20 k and the gauge method is 4 gauge, the range is －5000 µε to +5000 µε(microstrain), but I can measure up to ±20000 µε. What is the accuracy?

(ns-faq-darwin-8062-spec)

常見問題

Is the integral value on the input pulse module the calculated scale value?

(ns-faq-darwin-8060-spec)

常見問題

I'm using a previously delivered DARWIN, but can I use an Ethernet module that supports a new style?

(ns-faq-darwin-8059-spec)

常見問題

What does the specification, "Signal supply rating 15 VDC, 30 mA" mean?

(ns-faq-darwin-8008-spec)

常見問題

What is the difference between RELATIVE and ABSOLUTE in the timer settings?

(ns-faq-darwin-8006-spec)

常見問題

I do a burnout with the burnout setting command (XB) and set +OVER, but even when one side of the thermocouple is open the burnout check doesn't work.

(ns-faq-darwin-8005-spec)

常見問題

When outputting measured data, what happens if I specify channels not identified by the FM command?

(ns-faq-darwin-8002-spec)

常見問題

How many digits are displayed after the decimal point when applying a moving average?

(ns-faq-darwin-8001-spec)

常見問題

What are the burnout determination criteria (just for thermocouples)?

(ns-faq-darwin-8007-spec)

常見問題

What do "initial balancing" (EXEC) and "initialization" (INIT) of the strain input channels mean?

(ns-faq-darwin-8010-term)

常見問題

Can I connect the main unit to a company network?

(ns-faq-darwin-8019-connect)

常見問題

When I changed to Windows 7, I couldn't change the IP address of the Darwin Ethernet module. What should I do?

(ns-faq-darwin-8018-setting)

常見問題

Does DARWIN support Windows XP?

(ns-faq-darwin-8017-spec)

常見問題

When measuring voltage with a universal input module or DCV/TC input module, what is the limit value where an overrange occurs?

(ns-faq-darwin-8029-spec)

常見問題

Why aren't thermocouples included in certificates of results?

(ns-faq-darwin-8014-other)

常見問題

When I acquire DI input with the BFD32 and perform statistical computation (averaging) on the Viewer software, I get computation errors 0 and 1.

(ns-faq-darwin-8004-spec)

操作手冊

技術訊息

DARWIN Replacement Guide (9.1 MB)

MSDS/SDS

SDS (Safety Data Sheet) of recorder's consumables

想了解更多技術&解決方案嗎？

聯絡我們

DR231 停產產品

參考

下載

操作手冊

技術訊息

MSDS/SDS