EJX310B無線絕對壓力變送器

高性能無線壓力變送器EJX310B具有單晶矽諧振傳感器,適用於測量液體、氣體或蒸氣的流量以及液位、密度和壓力。此變送器不僅能夠傳輸製程變量,而且可以使用無線信號設定參數。變送器使用內部自帶電池,因為不需要硬件布線可以大幅降低安裝成本。該通信協議兼容ISA100.11a協議規格

Details

  • 電池壽命長
    使用兩個大容量鋰亞硫酰氯電池,超低耗電設計為無線運行提供更長的電池壽命。
  • 安全可靠的無線網絡連接
    設備之間的紅外通信用於無線網絡配定和參數設定。
  • 快速更新時間
    可將無線發布測量製程值的時間設定為0.5秒~60分鐘。

參考

摘要:

ISA100 wireless temperature and pressure transmitters.

摘要:
  • Daily manual reading of pressure and temperature gauges with report by phone.
  • The customer wants to change measurement from off-line to on-line.
  • Cabling for wired transmitters in huge plants (up to 300 meters long) is expensive.
產業別:
摘要:
  • Wireless pressure and temperature monitoring.
  • Repeater was set under the gateway.
  • The maximum distance between the repeater and transmitters is approximately 500m.
產業別:
摘要:

ISA100 wireless temperature and pressure transmitters with orifice plates allow:

  • No cabling installations or maintenance.
  • Small amount of hardware and simple equipment implementation means minimizing potential vandalism.
產業別:
摘要:

ISA100 Wireless Monitoring  

  • Gateway x1, Temperature Transmitter (YTA) x3, Pressure Transmitter (EJX) x1, Repeater x1

Gateway is installed at control room and 3m height extended antenna is set.

產業別:
摘要:
  • Temperature Transmitter (YTA) and Pressure Transmitter (EJX) are installed at each monitoring point.
  • Repeater is installed on high position.
產業別:
摘要:
  • Oil level measurement of diesel tanks that feed fuel to their diesel generator's which are at three locations and 400 meters apart from each other.
  • Also to measure level , pressure and flow to and from their main storage yard.
產業別:
摘要:

ISA100 Wireless Temperature and Pressure Transmitters

  • Gateway x1, Temperature Transmitter (YTA) x1, Pressure Transmitter (EJX) x1

High quality wireless communication confirmed

  • Packet Error Rate (PER) is 0 to 2.5%/ 5 days
產業別:
摘要:

The use of wireless technology in industrial automation systems offers a number of potential benefits, from the obvious cost reduction brought about by the elimination of wiring to the availability of better plant information, improved productivity and better asset management. However, its practical implementation faces a number of challenges: not least the present lack of a universally agreed standard. This article looks at some of these challenges and presents the approach being taken by Yokogawa.

摘要:

In recent years, more field wireless devices have been used in hazardous areas. Meanwhile, in plants that are usually recognized as hazardous areas, there are numerous metallic tanks and pipes that easily shield or reflect radio waves, as discussed later, thus resulting in a poor environment for wireless communication.

摘要:

The innovation of wireless technology increases the use of wireless communication in the industry. The introduction of wireless communication to plants, however, requires strict features such as robustness, real-time responsiveness, and low power consumption. This has restricted the use of wireless communication to limited applications such as data logging and device status monitoring that does not require strict real-time responsiveness and data arrival reliability in communication.

產業別:

下載

想了解更多技術&解決方案嗎?

聯絡我們

置頂