YTMX580多點輸入溫度變送器

YTMX580最多可接收8點測量輸入值,如熱電偶(8種類型:K、E、J等)或RTD訊號(3種類型:Pt100等),並將相應的測量輸入值轉換為無線訊號。它也可以接收DC電壓、電阻和4~20 mA DC訊號輸入。1

  • 輕鬆安裝:現場無線
    • 減少複雜的配線,降低安裝成本。
    • 傳統的有線連接可以輕鬆切換成無線解決方案。
  • ISA100.11a國際無線通訊標準2
    • 高級加密可以保持通訊的安全性。
    • 多供應商通訊支持不同制造商的變送器。
  • 可靠、快速的8通道多點測量
    • 8通道通用輸入:多點測量應用的最佳選擇。
    • 周期最快為1秒(3通道)或2秒(8通道)的高性能測量。
    • 卓越的環境耐受性:
      運行溫度:-40 to 85°C
      (-40 to 185°F)3
      保護等級: IP66/IP67 & NEMA 4X。
  • 防爆保護
    • FM, CSA:本安認證、非易燃(I級)認證
    • ATEX, IECEx:本安認證
    • TIIS:本安認證(申請中)
  • 輕鬆進行電池維護
    • 通常電池壽命為6年(測量周期為60秒時)。
    • 甚至可以在危險區域更換電池組。
  • 支持廠區域現場無線
    • 全冗餘(重複、Duocast)
    • 4hops
    • 遠程天線+延長電纜
  1. 不支持4~20 mA DC訊號輸入的防爆標準。
  2. 國際自動化協會(ISA)的工業無線通訊標準。
  3. TIIS: –20 to 60°C
    FM, CSA, ATEX, IECEx: –50 to 70°C
無線規格 通訊協議 ISA100.11a協議
頻率 2400 - 2483.5 MHz免許可證的ISM頻段
通訊速率 250 kbps
RF 變送器功率 Max. 11.6 dBm (固定)
無線電安全性 AES 128 位 加密
天線 +2 dBi 全向型
標準規格 精度 請參閱 GS 04R01B01-01EN.
電池壽命 以下條件下通常為六年1: 更新周期六十秒, 設備僅作為 I/O功能, 環境溫度為23°C ±2°C, LED顯示器關閉。
功能規格 輸入通道 8點
輸入訊號 熱電偶: B,E,J,K,N,R,S,T (IEC584)
RTD: Pt100,Pt200,Pt500 (IEC751) 2-,3-, 和4線
DCV2: mV (-10 to 100 mV), V (-0.01 to 1 V)
Ohm: 電阻 2-,3-, 和4線 (0 to 2000 Ω)
電流2: mA (4 to 20 mA, 帶外部分流電阻)
更新周期 1 秒 ~ 60 分可選 (4通道或以上時最快2秒)
電源 鋰亞硫酰氯電池 (尺寸 Dx2) 
外殼保護等級 IP66/IP67, NEMA Type 4X
運行環境溫度 -40 to 85°C (-40 to 185°F)
認證/標準 防爆保護 FM,CSA,ATEX,IECEx,TIIS: 本安
FM,CSA: 非易燃
EMC EN61326-1 A級 表 2 (用於工業區), EN61326-2-3, EN 301 489-1, EN 301 489-17
無線產品符合的標準 • FCC認證
• IC認證
• 日本無線電法
R&TTE一致性標準 ETSI EN 300 328, ETSI EN 301 489-1,ETSI EN 301 489-17, EN60950-1, EN62311
安全要求標準 EN61010-1, EN61010-2-030
CSA C22.2 No.61010-1-12, CSA C22.2 No.61010-2-030-12
UL 61010-1, UL 61010-2-030 (CSA NRTL/C)
  1. 實際電池壽命隨運行溫度、振動及其他環境因素的變化而變化。
  2. 不支持防爆標準。

YTMX580 System Configuration Example

YTMX580 Application Examples

摘要:
  • Temperature monitoring is required to prevent wind-fueled fire hazards.
  • The measuring points are up to 600 meters away from the control room.
摘要:

Install a YTMX580 on the side of the rotating furnace that can wirelessly transmit measured values from multiple temperature sensors.

摘要:

Employ the ISA100.11a-compliant YTMX580 Multipoint Wireless Transmitter. The YTMX580 has 8 channels of universal input, which is perfect for multipoint measurement applications, and it can withstand harsh operating temperatures of -40 to 85 °C.

產業別:
摘要:

A battery room is used to storage batteries for emergency power management in the plant. Each substation has battery room and the storage batteries are lead-acid batteries which must be maintained within specified operating temperature limits. Temperature management is important to ensure a long service life of the batteries especially for the plant in desert climates.

摘要:

Delayed Coker is a type of coker who's process consists of heating residual oil feed to its thermal cracking temperature in a furnace. The most important variable in industrial furnace control is temperature. Temperature is measured throughout the furnace in different zones and temperature effects the materials being manufactured and therefore must be precisely monitored to prevent deviations in quality of the final product.

摘要:

An induction furnace melts metal by creating very large currents in the material. These currents are induced using three electrodes positioned inside the furnace. The furnace is automated so that once the material has been melted, the electrodes are removed and the furnace then tips the molten metal into a crucible where it can be easily transferred to the production line where it will be cast into ingots. The atmosphere is extremely aggressive and the wired infrastructure is both expensive and very unreliable to maintain. The furnace control requires a total of 20 measurement points distributed around and inside the furnace. The harmonic field effects caused by short circuit 40,000 A (300V). The causes significant interference.

產業別:
摘要:

Customer needed efficiency improvement of steel manufacturing by temperature monitoring for heat/cooling equipment. Previous system required periodic compensation lead changing.

產業別:
摘要:

The client wanted to monitor the temperature on a chimney. Exhaust air is exposed to the heat on the way traveling from the inlet to the outlet in the chimney. Then constituent of the air transform to harmless elements. It is important to keep the temperature in the chimney as designed.

摘要:

Direct Reduction Iron (DRI) is one of the processes to reduce oxygen from iron oxide pellets for steel plant. More than 90% of DRI processes use heated LNG as process gas where PID control for temperature or interlock control is of vital importance.

產業別:
摘要:

One important risk to manage with regard to coal stacks is preventing fires due to spontaneous combustion.

產業別:
橫河技報
摘要:

Since 2010, Yokogawa has been providing wireless products conforming to the ISA100.11a wireless communication standard for industrial automation (IA). As a new addition to the lineup, Yokogawa has developed the YTMX580 multi-input temperature transmitter. Like the YTA510 temperature transmitter, YTMX580 is driven by batteries, but the number of its inputs has been increased from two to eight.

想了解更多技術&解決方案嗎?


聯絡我們
置頂