YFGW410現場無線管理站

YFGW410現場無線管理站以國際自動化協會(ISA)的工業自動化無線通訊標準ISA100.11a為基準。該產品具有符合ISA100.11a標準的系統管理/安全管理/網關功能,與現場無線接入點(YFGW510)和/或現場無線媒體轉換器(YFGW610)組合,構成現場無線系統。

  • 高度的可靠性和靈活性

    採用分離型結構,通製連接兩台本產品實現冗餘配定。運行中的現場無線系統無需停車,即可在線進行維護,運行高度靈活。

  • 高度安全的通訊

    該產品支持訪問控制列表(IP製濾器和端口製濾器)。根據不同角色的設定的密碼可以保護用戶界面的安全,防止惡意訪問。符合ISA100.11a標準的端到端通訊使用AES 128位進行加密。通製Achilles 1級認證,通訊和安全的穩定性得到了驗證。

  • 多協議通道

    該產品兼容如HART和Modbus的外部協議,並在設備和主機系統之間傳輸。 通製在安全儀表系統(SIS)和無線安全設備之間傳輸PROFIsafe等安全通訊協議,實現整個安全系統所需的安全完整性等級(SIL)。

  • 無線資源的高效利用

    該產品可以靈活利用現場無線網絡的帶寬,實現可靠、高效的無線通訊。 Duocast功能可以與連接到此產品的兩個主干路由器(BBR)同時接收數據。內定的數據緩存功能可以節省現場無線網絡的帶寬和現場無線設備的能耗。

通訊接口 標準 100Base-TX2
傳輸速度 100Mbps
接頭 RJ-45
電纜類型 類别5
最大長度 100m
端口數 4個端口
端口名稱 B1、B2、B3、B4
保護 Surge
通訊協議 Modbus
OPC1
管理/配定等 HTTP
IEEE1588PTP v2
橫河專用3
  1. 使用OPC接口連接時,需要現場無線設備OPC服務器(SSS7100)。有關該產品的詳細訊息,請參閱相關產品的一般規格書(GS)。
  2. 在室外接線至現場網絡或現場無線主干網100BASE-TX時,使用非金屬拉力構件的光纖連接YFGW610。
  3. 以TCP為基礎的定制協議用於本產品與“現場無線OPC服務器”、“FieldMate通用設備管理工具”、“工廠資源管理系統(PRM)”和YFGW510之間的通訊。有關各產品的詳細訊息,請參閱相關產品的一般規格書(GS)。
  4. 維護/診斷網絡(100BASE-TX、RS-232C)不能用於室外接線。
  5. 這些僅為橫河電機維護用的串行端口。
通訊接口 標準 100Base-TX4 RS-232C4 5
傳輸速度 100Mbps 115.2kbps
Connector RJ-45 RJ-11
Cable Type 類别5 橫河專用
Maximum 100m 15m
Number of Ports 1個端口 1個端口
Port Name M1
保護
通訊協議 Modbus
OPC1
管理/配定等 HTTP橫河專用3
  1. 使用OPC接口連接時,需要現場無線設備OPC服務器(SSS7100)。有關該產品的詳細訊息,請參閱相關產品的一般規格書(GS)。
  2. 在室外接線至現場網絡或現場無線主干網100BASE-TX時,使用非金屬拉力構件的光纖連接YFGW610。
  3. TCP為基礎的定制協議用於本產品與“現場無線OPC服務器”、“FieldMate通用設備管理工具”、“工廠資源管理系統(PRM)”和YFGW510之間的通訊。有關各產品的詳細訊息,請參閱相關產品的一般規格書(GS)。
  4. 維護/診斷網絡(100BASE-TX、RS-232C)不能用於室外接線。
  5. 這些僅為橫河電機維護用的串行端口。

 


 

功能規格 溫度範圍 運行時:-40 to +65°C(海拔高度:最高2000米)
-40 to +55°C (海拔高度:高於2000米,最高3000米)
存儲時: -40 to +85°C
濕度範圍 運行時:5 to 95 %RH (無結露)
存儲時:5 to 95 %RH (無結露)
溫度變化率 運行時:±10°C/h
存儲時:±20°C/h 
電源 電壓範圍:10.8~26.4 V DC
額定電源: 24 V DC
瞬時斷電: 瞬時斷開連接
直流電源波速比:≤1%p-p 
功耗 最大10 W
保護等級 IP20
抗振性 0.15 mm P-P (5~58 Hz), 1 G (58~150 Hz)
耐衝擊性 15 G 11 ms
抗干擾性 電場:≤3 V/m (80MHz~1GHz)
靜電放電:≤ 4 kV(接觸放電)、 8 kV(空氣放電)
接地 D級接地(不要與其他儀表共用接地線)
冷卻方式 自然空氣冷卻
強制合規性聲明

CE一致性

EMC: EN61326-1 Class A, Table 2, EN55011 Class A group1, EN61000-6-2
安全要求 CSA C22.2 No. 61010-1 (僅用於室內)
防爆類型 ATEX認證n類聲明
Co通訊接口rface 標準 100BASE-TX2 RS-4853
傳輸速度

100Mbps
自適應)

38400, 19200, 9600 bps

接頭 RJ-45 橫河專用
電纜類型 類别5 AWG24~12
最大長度 100m 1200m
端口數 3個端口 1個端口
端口名稱 F1、F2、F3
保護 浪湧 絕緣、浪湧保護
Co通訊協議tocol

I/O數據和狀態

Modbus/TCP
OPC 1 3
橫河專用

Modbus/RTU

管理/配定等

HTTP
NTP/SNTP
橫河專用3

  1. 使用OPC接口連接時,需要現場無線設備OPC服務器(SSS7100)。有關該產品的詳細訊息,請參閱相關產品的一般規格書(GS)。
  2. 在室外接線至現場網絡或現場無線主干網100BASE-TX時,使用非金屬拉力構件的光纖連接YFGW610。
  3. 以TCP為基礎的定制協議用於本產品與“現場無線OPC服務器”、“FieldMate通用設備管理工具”、“工廠資源管理系統(PRM)”和YFGW510之間的通訊。有關各產品的詳細訊息,請參閱相關產品的一般規格書(GS)。
摘要:
  • Temperature monitoring is required to prevent wind-fueled fire hazards.
  • The measuring points are up to 600 meters away from the control room.
摘要:

One important risk to manage with regard to coal stacks is preventing fires due to spontaneous combustion.

產業別:
摘要:

A battery room is used to storage batteries for emergency power management in the plant. Each substation has battery room and the storage batteries are lead-acid batteries which must be maintained within specified operating temperature limits. Temperature management is important to ensure a long service life of the batteries especially for the plant in desert climates.

摘要:

Delayed Coker is a type of coker who's process consists of heating residual oil feed to its thermal cracking temperature in a furnace. The most important variable in industrial furnace control is temperature. Temperature is measured throughout the furnace in different zones and temperature effects the materials being manufactured and therefore must be precisely monitored to prevent deviations in quality of the final product.

摘要:

Blending plays a key role in industries such as food, healthcare and chemicals etc. Temperature and vacuum measurements are very important in minimizing the moisture content to ensure the quality of the final product. Strictly maintaining them throughout the process ensures the final product yield.

產業別:
摘要:

An induction furnace melts metal by creating very large currents in the material. These currents are induced using three electrodes positioned inside the furnace. The furnace is automated so that once the material has been melted, the electrodes are removed and the furnace then tips the molten metal into a crucible where it can be easily transferred to the production line where it will be cast into ingots. The atmosphere is extremely aggressive and the wired infrastructure is both expensive and very unreliable to maintain. The furnace control requires a total of 20 measurement points distributed around and inside the furnace. The harmonic field effects caused by short circuit 40,000 A (300V). The causes significant interference.

產業別:
摘要:

The client wanted to monitor the pressure of the gas well at offshore platform remotely to reduce maintenance cost and increase safety of maintenance personnel.

摘要:

Customer needed efficiency improvement of steel manufacturing by temperature monitoring for heat/cooling equipment. Previous system required periodic compensation lead changing.

產業別:
摘要:

The client wanted to monitor the temperature on a chimney. Exhaust air is exposed to the heat on the way traveling from the inlet to the outlet in the chimney. Then constituent of the air transform to harmless elements. It is important to keep the temperature in the chimney as designed.

摘要:

Direct Reduction Iron (DRI) is one of the processes to reduce oxygen from iron oxide pellets for steel plant. More than 90% of DRI processes use heated LNG as process gas where PID control for temperature or interlock control is of vital importance.

產業別:
摘要:

Pressure measurement of tubeless tyres to monitor the air loss is one of the key performance tests in the tyre manufacturing units. Relocation of tyres from one testing rack to the other for various tests and frequent movement of the testing setup for conditional tests to various locations calls for cable free implementation for ease of handling.

產業別:
摘要:

 Ground water well level monitoring is needed.

產業別:
摘要:
  • Temperature monitoring at a tank farm
  • Temperature and pressure monitoring in tank jungles, three vertical monitoring points.
產業別:
摘要:

Wireless technology has a long history, and it began around the time that James C. Maxwell theoretically predicted and then proved the existence of electromagnetic waves in the 1860s, and when Heinrich R. Hertz experimentally confirmed the actual existence of the electromagnetic wave in 1888.

產業別:
摘要:

In plant sites, there are various places such as those affording an unobstructed view like tank yards, and others surrounded by metal pipes and equipment obstructing the view (hereafter referred to "pipe jungles"), often seen in oil refinery and chemical on-site plants. The frequency band of radio waves used for field wireless communication is 2.4 GHz, which has high straightness and its ability to go around things can hardly be expected.

橫河技報
摘要:

The introduction of wireless technologies into plants is anticipated as one of the measures for implementing field digital solutions not only to reduce cable wiring costs but also to improve plant wide safety/stable operations, operating efficiency, and so on.

產業別:
橫河技報
摘要:

The FieldMate versatile device management wizard is PC software mainly used for configuring and adjusting field devices. Under the concept of "one tool for all," Yokogawa has been enhancing this software to support a wide range of field devices and field communication protocols.

產業別:
摘要:

In recent years, expectations for control systems using wireless communications have been increasing in the process control market. This is because these systems do not require power and communication wiring for field instruments, enabling reduced initial and maintenance costs, and easy installation.

想了解更多技術&解決方案嗎?


聯絡我們
置頂