Taiwan TW   
LL50A
OpreX 控制設備

LL50A參數設定軟件

LL50A參數設定軟件用於從PC中構建和設定UTAdvanced數字指示控制器的參數和梯形圖程序等。與控制器通信期間也可以調整和監測梯形圖程序。

  • 參數設定功能
  • 整定功能
  • 梯形圖構建功能
  • 網絡配定文件創建功能

Details

參數設定功能

Parameter Setting Display

可以輕鬆設定確定控制器功能的參數：

用於調整控制器的PID參數。將測量的輸入值、目標設定值和控制輸出值作為趨勢圖顯示在個人計算機上，允許PID參數修改、AUTO/MAN切換、手動操作時進行控制輸出修改等。

整定功能

Tuning Display

用於調整控制器的PID參數。將測量的輸入值、目標設定值和控制輸出值作為趨勢圖顯示在個人計算機上，允許PID參數修改、AUTO/MAN切換、手動操作時進行控制輸出修改等。

梯形圖構建功能

Ladder Program Building Display

可以創建梯形圖順控程序，監測梯形圖程序。

網絡配定文件創建功能

可用於創建PROFIBUS-DP通信的電子設備數據表。

通製總線供電的USB電纜

Via Bus Powered USB Cable

可以在控制器未通電的情況下設定參數。

通製以太網通信接口

Via Ethernet Communication Connector

通製專用適配器

Via Dedicated Adapter可在連接到控制面板時使用。

  • 適用控制器：UT55A、UT52A、UT35A、UT32A
  • 適用操作系統：Windows XP/Vista
  • 通信方式：USB 1.1

通製RS-485通信終端

Via RS-485 Communication Terminals

參考

常見問題
I installed LL50A on my PC but I can't open communications.
(ns-faq-ut-2072-connect)
Thumbnail
常見問題
What do "upload" and "download" mean with the LL50A?
(ns-faq-ut-2084-term)
Thumbnail
常見問題
I'm creating setup data on the LL50A. I want to write the data on the controller, but should I do an upload or a download?
(ns-faq-ut-2101-setting)
Thumbnail
常見問題
I can't select Tuning, Register monitor, or Ladder program monitor from the LL50A monitor menu.
(ns-faq-ut-2105-setting)
Thumbnail
常見問題
Does a communication cable come with the LL50A?
(ns-faq-ut-2107-spec)
Thumbnail
常見問題
Can you tell me the model of the cable that comes with the LL50A parameter setting software?
(ns-faq-ut-2149-select)
Thumbnail
常見問題
While setting data on the LL50A, the MODE parameter item doesn't appear.
(ns-faq-ut-2151-setting)
Thumbnail
常見問題
Can I purchase an English version of the LL50A setting tool?
(ns-faq-ut-2161-select)
Thumbnail
常見問題
There are no operation keys on the /MDL DIN rail attachment model. How can I perform autotuning?
(ns-faq-ut-2188-setting)
Thumbnail
常見問題
I installed the LL50A. I want to write the UT settings to a PC, but I get the following error message. "Failed to upload instrument information. Check the communication connection and conditions."
(ns-faq-ut-2190-setting)
Thumbnail
常見問題
Can I switch the language of LL50A from Japanese to English?
(ns-faq-ut-2199-setting)
Thumbnail
常見問題
Communication on the LL50 setting tool isn't working.
(ns-faq-ut-2211-setting)
Thumbnail
常見問題
I want to apply protection to a ladder program created on LL50A.
(ns-faq-ut-2212-setting)
Thumbnail
常見問題
Can I use a commercially available USB cable for LL50A?
(ns-faq-ut-2242-connect)
Thumbnail
常見問題
What’s the password I need to enter in LL50A to restore factory defaults on the controller?
(ns-faq-ut-2244-setting)
Thumbnail
常見問題
What’s the password I need to enter in LL50A to restore user defaults on the controller?
(ns-faq-ut-2245-setting)
Thumbnail
常見問題
When reading UT data on LL50A, the DCU version of the system data is R0.00.00. Is that normal?
(ns-faq-ut-2250-spec)
Thumbnail
常見問題
I'm editing a CC-Link communication profile on the LL50A. I want to add the UT32A-D type to the RS485 communication line, but the PV2 register symbol doesn't appear.
(ns-faq-ut-2168-setting)
Thumbnail
常見問題
I purchased a DIN rail mount UTAdvanced series, but how should I configure it?
(ns-faq-ut-2165-spec)
Thumbnail
常見問題
I want to perform cascade control of 2 temperature inputs on a single unit. Is there a model that can do that?
(ns-faq-ut-2193-select)
Thumbnail
常見問題
When using the LL50A to create ladder programs, which ladder program edit mode should I use: "input ladder calculation," "output ladder calculation," or "user ladder"?
(ns-faq-ut-2030-program)
Thumbnail
常見問題
I'm creating ladder programs on the LL50A. I want to set input computed results to R.SP, but I see lots of digits are displayed after the decimal point of the data on the ladder monitor. Can I reduce the number of digits displayed after the decimal point?
(ns-faq-ut-2031-program)
Thumbnail
常見問題
Can I disable ladder programs that I used?
(ns-faq-ut-2034-setting)
Thumbnail
常見問題
My LL50A ladder program monitor does not start.
(ns-faq-ut-2036-program)
Thumbnail
常見問題
A ladder program that I wrote doesn't work properly.
(ns-faq-ut-2037-program)
Thumbnail
常見問題
Can I change the temperature controller profile information for CC-Link communication?
(ns-faq-ut-2068-spec)
Thumbnail
常見問題
With the LL50A and UTAdvanced, can I perform RS-485 communications without a dedicated cable?
(ns-faq-ut-2051-connect)
Thumbnail
常見問題
How can I display parameters that aren't displayed in the LL50A parameter setting software?
(ns-faq-ut-2052-soft)
Thumbnail
常見問題
After changing the UT's SP values from the MELSEC via CC-Link, when I change the SP value on the UT main unit, I can't change to the same value as before from the MELSEC.
(ns-faq-ut-2026-connect)
Thumbnail
常見問題
Can I convert GREEN series (UT300/UT400/UT500/UP500) parameters for use with the UTAdvanced series?
(ns-faq-ut-2060-soft)
Thumbnail

下載

操作手冊
產品規格
軟體下載

想了解更多技術&解決方案嗎？

聯絡我們
置頂