Name: UTAdvanced UT32A-D
Brand: Yokogawa
SKU: ut32a-d

UT32A-D是一款緊湊型數字指示控制器，帶可選的2回路控制，還包括梯形圖順控功能。

^{CSA C22.2 61010-/1
UL61010-1}
DIN導軌安裝型控制器獲得CE認證。

特性

先進控制

梯形圖順序控制
模糊邏輯控制器

簡單性

易讀的14段大型彩色LCD顯示屏
參數的文本滾動功能
導航指南和導航鍵
可編程功能鍵
用戶可設定的默認值
支持多語言(英語、西班牙語、法語、德語)
65 mm深的緊湊設計

網絡

RS-485 (Modbus/RTU、儀表間通信、協調運轉、PC-Link)

可靠性

3年保修期*1
RoHS/WEEE
NEMA4*2/IP66前面板

*1: 3年保修期為出廠後的36個月。
*2: 僅軟管測試應用

軟件

LL50A參數設定軟件帶梯形圖程序構建功能(另售)
可提供面板和DIN導軌安裝型。

^{CSA C22.2 61010-/1
UL61010-1}
DIN導軌安裝型控制器獲得CE認證。

【Support Information】List of RoHS

This is a list of recorder and controller products that support the RoHS (2011/65/EU) directive.

更多

應用

Easily Adding Messages to Manufacturing Data Using the Touch Panel

常見問題

I'm editing a CC-Link communication profile on the LL50A. I want to add the UT32A-D type to the RS485 communication line, but the PV2 register symbol doesn't appear.

(ns-faq-ut-2168-setting)

常見問題

Even when I turn ON the power, nothing appears on the UT display.

(ns-faq-ut-2013-setting)

常見問題

Can you tell me the procedure for assignment when the heater break alarm output option (suffix code /HA) is installed?

(ns-faq-ut-2015-setting)

常見問題

I can't find a parameter I want to set.

(ns-faq-ut-2001-setting)

常見問題

I set up a difference lower limit alarm, but no alarm is output.

(ns-faq-ut-2017-setting)

常見問題

With the UTAdvanced ladder program function, can I use constants and other parameters in basic math functions?

(ns-faq-ut-2024-connect)

常見問題

Are communications with the FA-M3 possible?

(ns-faq-ut-2021-connect)

常見問題

Can I use an RS-485 communication program written for the GREEN series (UT300/UT400/UT500/UP300/UP500/UM300) on a UT-Advanced series instrument?

(ns-faq-ut-2025-connect)

常見問題

When using the LL50A to create ladder programs, which ladder program edit mode should I use: "input ladder calculation," "output ladder calculation," or "user ladder"?

(ns-faq-ut-2030-program)

常見問題

I'm creating ladder programs on the LL50A. I want to set input computed results to R.SP, but I see lots of digits are displayed after the decimal point of the data on the ladder monitor. Can I reduce the number of digits displayed after the decimal point?

(ns-faq-ut-2031-program)

常見問題

Can I use analog input in computations?

(ns-faq-ut-2032-program)

常見問題

Can I rewrite constants used in ladder programs via communication?

(ns-faq-ut-2033-program)

常見問題

Can I disable ladder programs that I used?

(ns-faq-ut-2034-setting)

常見問題

Can I detect when the power is turned ON?

(ns-faq-ut-2035-program)

常見問題

My LL50A ladder program monitor does not start.

(ns-faq-ut-2036-program)

常見問題

A ladder program that I wrote doesn't work properly.

(ns-faq-ut-2037-program)

常見問題

My ladder program's comparison commands don't work properly.

(ns-faq-ut-2038-program)

常見問題

When using contact input in ladder programs, is it necessary to turn OFF the contact function assigned to the setup parameters?

(ns-faq-ut-2039-program)

常見問題

Can you tell me how to wire and set up waste liquid pH control?

(ns-faq-ut-2041-setting)

常見問題

I'm controlling the temperature of an electric furnace using a thyristor. How should I wire and configure this?

(ns-faq-ut-2042-setting)

常見問題

I'm controlling the temperature of an electric furnace using solid state relays. How should I wire and configure this?

(ns-faq-ut-2043-setting)

常見問題

Can you tell me how to wire and set up flow control using an inverter?

(ns-faq-ut-2044-setting)

常見問題

I'm controlling tank level ON/OFF. How should I wire and configure this?

(ns-faq-ut-2045-setting)

常見問題

I'm doing proportional control of tank level. How should I wire and configure this?

(ns-faq-ut-2046-setting)

常見問題

I'm controlling tank pressure. How should I wire and configure this?

(ns-faq-ut-2047-setting)

常見問題

With the LL50A and UTAdvanced, can I perform RS-485 communications without a dedicated cable?

(ns-faq-ut-2051-connect)

常見問題

How can I display parameters that aren't displayed in the LL50A parameter setting software?

(ns-faq-ut-2052-soft)

常見問題

Can I acquire trend data on the LL50A?

(ns-faq-ut-2053-soft)

常見問題

Can I switch scaling using contact input?

(ns-faq-ut-2054-program)

常見問題

What is the resolution of control output (4–20 mADC)?

(ns-faq-ut-2055-spec)

常見問題

I'm controlling tank temperature. How should I wire and configure this?

(ns-faq-ut-2048-setting)

常見問題

I'm controlling furnace temperature with a motorized valve. How should I wire and configure this?

(ns-faq-ut-2049-setting)

常見問題

I'm controlling temperature with a heat exchanger. How should I wire and configure this?

(ns-faq-ut-2050-setting)

常見問題

To cause setpoints (SP) to change at a fixed rate, I set the SP ramp up and down parameters (UPR and DNR). Is this function still enabled when changing the SP value through remote input (RSP)?

(ns-faq-ut-2058-spec)

常見問題

Are all COM terminals for contact input connected internally?

(ns-faq-ut-2061-spec)

常見問題

Is there an easy way to change the settings for alarms 1 and 2?

(ns-faq-ut-2062-spec)

常見問題

Can I reverse the 4–20 mA control output and change to a 20–4 mA signal?

(ns-faq-ut-2063-spec)

常見問題

How can I enter initial settings?

(ns-faq-ut-2064-setting)

常見問題

OVER was displayed on the PV (measured value) display. How will the control output operate in this case?

(ns-faq-ut-2070-spec)

常見問題

I initialized the controller, but no control output value is output.

(ns-faq-ut-2074-setting)

常見問題

B.OUT was displayed on the PV (measured value) display. What could be the cause of this?

(ns-faq-ut-2077-connect)

常見問題

There are differences between PV display values and the displays of other measuring instruments. Can I correct these?

(ns-faq-ut-2078-spec)

常見問題

An error occurs with position-proportional type automatic valve position adjustment (V.AT).

(ns-faq-ut-2083-setting)

常見問題

Is a terminal cover included?

(ns-faq-ut-2088-select)

常見問題

Can I set the PV display to -100 with 20 mA input, and to 0 with 4 mA input?

(ns-faq-ut-2089-setting)

常見問題

Can I switch the temperature units between°C and °F?

(ns-faq-ut-2087-spec)

常見問題

I'm trying to switch the PID number with DI input but it's not working correctly. To check, I'm looking at the green numbers in the upper left of the SP display.

(ns-faq-ut-2090-spec)

常見問題

Do you have a 48 x 96 sized controller that supports CC-Link?

(ns-faq-ut-2091-select)

常見問題

I perform auto-tuning on the UT, but the auto-tuning parameters (AT) do not appear.

(ns-faq-ut-2094-setting)

常見問題

I purchased a UT with the communication function, but currently I'm not using the communication function. I haven't even wired communication, but the blinking SP decimal point of a communication error appears. Why is that?

(ns-faq-ut-2096-connect)

常見問題

Up to how many SSRs can be connected to the UT?

(ns-faq-ut-2097-spec)

常見問題

I'm perform auto-tuning on the UT. At about how much relative to the set point does the output switch?

(ns-faq-ut-2099-spec)

常見問題

I want to check the currently used PID settings.

(ns-faq-ut-2102-setting)

常見問題

I'm doing temperature control. I did PID tuning, but the overshoots are still large and I want to suppress them. Is there a good way to do this?

(ns-faq-ut-2104-setting)

常見問題

I'm replacing my GREEN series with the UTAdvanced series. Is there anything I need to be careful of in terms of wiring?

(ns-faq-ut-2108-connect)

常見問題

If I switch the SP number will the PID number switch too?

(ns-faq-ut-2109-spec)

常見問題

Does the alarm function work when operation is stopped (STOP)?

(ns-faq-ut-2110-spec)

常見問題

What is the alarm standby function?

(ns-faq-ut-2111-spec)

常見問題

Are the control and alarm hysteresis values set as percentages?

(ns-faq-ut-2113-setting)

常見問題

I'm using the UP35A and UP55A. Are PV and local event hysteresis values set with percentages?

(ns-faq-ut-2114-setting)

常見問題

How can I check the RS485 communication status?

(ns-faq-ut-2116-connect)

常見問題

I want to set the PID, output limiter, and hysteresis for each SP number.

(ns-faq-ut-2120-setting)

常見問題

What is the minimum hold time that contact input can detect?

(ns-faq-ut-2121-spec)

常見問題

Why are PID parameters set with relay output?

(ns-faq-ut-2123-spec)

常見問題

Does the UTAdvanced series support CCC and GB standards? Can it be used in China?

(ns-faq-ut-2124-spec)

常見問題

Can the alarm operation be disabled during operation stop (STOP) or manual operation (MAN)?

(ns-faq-ut-2129-setting)

常見問題

I want to stop the lamp indicator or action for unused alarms.

(ns-faq-ut-2136-setting)

常見問題

Can I assign heater disconnection alarm 1 to alarm 1 output (terminal no. 108-109)?

(ns-faq-ut-2137-setting)

常見問題

Is there a limit on the number of times you can write to the D register via communication?

(ns-faq-ut-2140-spec)

常見問題

What should I do if DI input is not accepted on relay contacts?

(ns-faq-ut-2141-spec)

常見問題

Can I remove the output limit value restriction during manual operation?

(ns-faq-ut-2143-setting)

常見問題

When I start operation (RUN), control output doesn't change.

(ns-faq-ut-2144-setting)

常見問題

When I change from STOP to RUN the control output overshoot becomes large. What can I do about that? There is no problem with PID tuning.

(ns-faq-ut-2145-setting)

常見問題

I'm controlling temperature by using voltage pulse output to operate a heater with an SSR, but I can't stop the hunting. I already performed auto-tuning.

(ns-faq-ut-2146-setting)

常見問題

Valve calibration parameters don't appear on position proportional controllers.

(ns-faq-ut-2147-setting)

常見問題

I am connecting the UT and Mitsubishi's touch panel GOT using RS-485 communication. Which communication protocol should I choose?

(ns-faq-ut-2152-setting)

常見問題

I'm controlling pressure. Are there PID reference values?

(ns-faq-ut-2153-setting)

常見問題

I'm controlling flow. Are there PID reference values?

(ns-faq-ut-2154-setting)

常見問題

I'm controlling flue levels. Are there PID reference values?

(ns-faq-ut-2155-setting)

常見問題

With 1-5 VDC input, can I make the PV display 0.00 to -10.00 kPa?

(ns-faq-ut-2156-setting)

常見問題

I just purchased the UT and UM and the EV lamp turned ON. What does that mean?

(ns-faq-ut-2157-setting)

常見問題

I want to create a ladder program that writes output tracking values via communication.

(ns-faq-ut-2158-setting)

常見問題

I'm using a thermocouple for the input, but "b.out" appears on the PV display. What should I check first?

(ns-faq-ut-2160-other)

常見問題

Can you tell me the inrush current value of the UTA series of instrument power?

(ns-faq-ut-2162-spec)

常見問題

Can you tell me how to get the measurement accuracy when measuring 0 to 1000°C with a type K thermocouple? I selected input type K2 (-270.0 to 1000.0).

(ns-faq-ut-2163-spec)

常見問題

I purchased a DIN rail mount UTAdvanced series, but how should I configure it?

(ns-faq-ut-2165-spec)

常見問題

What is the measured current during RTD input?

(ns-faq-ut-2167-spec)

常見問題

I'm pressing SET/ENTER on the front panel keys but I can't change the SP value.

(ns-faq-ut-2171-setting)

常見問題

I want to add 10-segment linearizers to the UT control output value. Can the broken line output result be read via communication?

(ns-faq-ut-2176-spec)

常見問題

I set the UTA output to 10-segment linearizer approximation. Can the resulting output values be read via communication?

(ns-faq-ut-2177-spec)

常見問題

Can I use square root extraction on measured input?

(ns-faq-ut-2183-spec)

常見問題

Can I make it display the alarm type when an alarm occurs?

(ns-faq-ut-2184-spec)

常見問題

What is the MR (manual reset) function?

(ns-faq-ut-2185-spec)

常見問題

How to connect one UT with CC-Link communication to another downstream UT via RS485. The RS485 communication terminal of the UT with CC-Link communication is a 2-wire system, and that of the other UT is a 4-wire system.

(ns-faq-ut-2187-connect)

常見問題

I want to control the temperature of 3 zones. How should I configure it?

(ns-faq-ut-2191-select)

常見問題

I purchased a general type of controller. Can this control cooling?

(ns-faq-ut-2194-other)

常見問題

I want to check the suffix code but I can't see the name plate. Is there another way to check it?

(ns-faq-ut-2195-setting)

常見問題

After converting the controller manual output value to a number like the SP, can I finalize it with the ENT key?

(ns-faq-ut-2196-setting)

常見問題

I'm using the Pt100 sensor. The PV input type IN parameters include PT1, PT2, and PT3, but which should I select?

(ns-faq-ut-2197-setting)

常見問題

Can I apply a 24 VDC voltage to a contact input?

(ns-faq-ut-2198-spec)

常見問題

I want to output the results of calculations by ladder programs with 4-20 mA on the OUT output terminal, but nothing happens.

(ns-faq-ut-2207-program)

常見問題

I want to output the results of calculations by ladder programs with 4-20 mA on the RET output terminal, but nothing happens.

(ns-faq-ut-2208-program)

常見問題

I want to output the results of calculations by ladder programs with 4-20 mA on the OUT2 output terminal, but nothing happens.

(ns-faq-ut-2209-program)

常見問題

Is the SP slope valid for remote SP values as well?

(ns-faq-ut-2210-spec)

常見問題

I want to contol pressure and temperature with a single pattern using the UP and UT.

(ns-faq-ut-2213-spec)

常見問題

When installing the UTAdvanced series, what is the depth in millimeters from the surface of the panel?

(ns-faq-ut-2214-spec)

常見問題

Can I use DO to transmit the SP number currently used on the UT to an external device?

(ns-faq-ut-2215-setting)

常見問題

Can I switch heating and cooling control?

(ns-faq-ut-2218-spec)

常見問題

Can I connect multiple instruments such as power controllers to a controller's analog current output?

(ns-faq-ut-2219-connect)

常見問題

I’ve coordinated operation between 2 UT's via RS485 communication. I want to compensate the SP value of the child UT but is that possible?

(ns-faq-ut-2224-setting)

常見問題

I wrote the alarm setting values from the UT350 to the UT35A via communication. On the UT350, the alarm setting values were common from 1SP through 4SP, but when updating to the UT35A, what should I do?

(ns-faq-ut-2231-spec)

常見問題

Do you sell terminal covers?

(ns-faq-ut-2233-other)

常見問題

To prevent mis-operation, is there a setting where you hold down the A/M button to switch the operation?

(ns-faq-ut-2240-setting)

常見問題

Can I set it for 1 shot-only event display and contact output ON when an alarm activates?

(ns-faq-ut-2241-setting)

常見問題

Is it possible to connect multiple contact inputs to a single relay contact?

(ns-faq-ut-2243-connect)

常見問題

Can I choose the color of the UTAdvanced terminal cover?

(ns-faq-ut-2246-spec)

常見問題

Is the current transformer for heater current measurement that is used by UTAdvanced made by Yokogawa Electric?

(ns-faq-ut-2247-other)

常見問題

What is the model of the current transformer for heater current measurement used by UTAdvanced?

(ns-faq-ut-2248-spec)

常見問題

How can I display the currently used PID no. on the operation screen?

(ns-faq-ut-2249-setting)

常見問題

Can I set control for power fail recovery to MAN?

(ns-faq-ut-2117-setting)

產品型錄

UTAdvanced數字指示調節器 (5.6 MB)

操作手冊

產品規格

軟體下載

LL50A Parameter Setting Software *Log-in Required

產品外型圖

想了解更多技術&解決方案嗎？

聯絡我們

UTAdvanced UT32A-D

Overview

特性

先進控制

簡單性

網絡

可靠性

軟件

Details

【Support Information】List of RoHS

參考

下載

產品型錄

操作手冊

產品規格

軟體下載

產品外型圖