The wireless GX70SM remote data logger allows for quick and convenient data collection in areas that are not easily accessible or expensive to wire to.
The GX70SM wireless input unit is a compact, battery-powered analog input module that uses 920 MHz radio link to connect to a SMARTDAC+ GX20, GP20, or GM10. The GX70SM allows for the collection of a variety of data points from locations that cannot be easily reached or are difficult and expensive to access. The optional humidity sensor and its simple mounting options make this ideal for monitoring environmental conditions in areas like warehouses, clean rooms, and inside working environments where heat-related workplace injuries are a concern.
Note: The use of SMART 920 enabled units is limited to the United States. Please refer to the instructions for proper installation and use.
A pair of standard CR123 batteries will power the GX70SM module for 5 years when configured for a measurement once every 5 minutes. The module can also be powered from the USB port for long term or high speed data collection.
The wireless module has 2 standard, universal inputs and 1 dedicated input for relative humidity measurement.
The universal input channels support thermocouples, RTDs, DC voltages, current (with an externally mounted resistor), and digital inputs.
The module inputs can be calibrated by the customer when routine calibration is required for compliance.
Wireless Terminal Authentication blocks unauthorized access. It also provides industrial grade AES-128 signal encryption to prevent tampering and wiretapping.
The wireless input unit GX70SM has built-in humidity sensor. It can be used in areas with severe restrictions such as clean rooms. Also, the inputs can be calibrated by the customer.
Due to its excellent responsiveness to aggressive temperature changes, temperature and humidity can be controlled from inside the factory. This allows for easier management of environmental and safety conditions, preventing incidents such as heat stroke of personnel.
SMART 920 supports electronic records and electronic signatures under FDA 21 CFR Part 11 for food, pharmaceutical, and other FDA regulated applications.
Mounting conduit and pulling wire is no longer necessary. Installing a wireless solution greatly reduces installation time and costs.
Wireless I/O components have multiple mounting options to match the conditions at the field location. Components can be DIN rail mounted, wall mounted, set on wall screws, set on a desktop, or attached to a ferrous surface with a magnet. These options provide for system flexibility allow changes to be quickly implemented.
A 920 MHz wireless signal has a longer range than one in the 2.4 GHz band, typically used in wireless LAN applications. It has a greater reach around obstacles making it favorable for long distance or highly obstructed environments. Up to 0.5 mile line of sight.
Smart user interface, smart architecture, and smart functionality is achieved in the new Yokogawa SMARTDAC+ data acquisition and control product series. The Yokogawa SMARTDAC+ GX and GP are fully integrated measurement, display, and recording platforms equipped with an advanced touch screen operator interface. GX series is a panel-mount design, capable of operating in harsh industrial applications and environments. GP is the portable version of the GX, intended for use in lab and test bench applications.
Looking for more information on our people, technology and solutions?