Digital SMART SENCOM™ Sensor Interface Box, IB100

The IB100 interface box is used for creating a connection between SENCOMTM and a PC/tablet running either original SPS24 PC Calibration software or the Mobile Field Device Managment (FieldMate) calibration and maintenance software. The interface box supports the off-line calibration feature SENCOMTM offering flexibility and increases process uptime. 

Maintenance Manager"Is my instrument still working efficiently and providing accurate measurements?"

Maintenance Manager

By using SMART sensors, calibration data is stored within the sensor’s memory chip. Once the sensor is connected to the analyzer, the latest calibration data is automatically uploaded to the analyzer, making calibrating in the field a thing of the past. Using calibration and diagnostic data from the sensor, the FieldMate data management system provides technicians with the tools to predict maintenance and calibration frequency, estimate sensor life, and predict life expectancy. Calibration data can be downloaded or uploaded to and from the SENCOM sensor to the receiving HMI, allowing for true plug and go field installation. 


Software

SENCOMTM PC Calibration Software (SPS24)

SENCOMTM PC Calibration Software (SPS24)The SENCOM™ PC Software, SPS24, offers a unique means to optimize the performance of pH/ORP sensors for enhanced reliability and process safety. The software allows the operator to monitor pH/ORP sensor performance, calibrate and configure various parameters.

 

 

 

Mobile Feild Device Managment (FieldMate)

Mobile Feild Device Managment (FieldMate)FieldMate is a PC based configuration tool that performs numerous tasks, including initial setup, daily maintenance, troubleshooting, and configuration backup for device replacement.

Learn More

Resources

No, calibration can be done on the FLXA402 screen, or by bring a tablet with FieldMate into the field using the Bluetooth connectivity with FLXA402, or with Fieldmate using the BT connection with IB100.
No, this is not possible with a HART handheld, but you can utilize the IB100 interface box with a tablet with the FieldMate software installed.
You can connect the SA11 to the IB100. With the IB100 you can connect via Bluetooth to the PC or laptop.
Maximum 4 sensors at a time, however, each sensor needs to be connected to an SA11 and IB100 interface box. Only one sensor can be connected at a time to SA11 and IB100. ...
The WU11 is to connect the SA11 to the FLXA402, UM33A-S, SMARTDAC+ or any other HOST system. WU11-…-V: for FU20F, FU24F, SC25F, and IB100 WU11-…-S: for SA11, BA11, IB100, and –VS sensors

Downloads

Videos

News

Looking for more information on our people, technology and solutions?

Contact Us

Top