LL100 PC-Based Parameter Setting Tool (Enhanced)

Description
The LL100 PC-based Parameters Setting Tool is a software package used to set the setup parameters, operating parameters, and program patterns* of the GREEN Series controllers from a personal computer.
*: For program controllers only.
Applicable Model
LL100, UP350, UP351, UP550, UP750, UT320, UT321, UT350, UT351, UT420, UT450, UT520, UT550, UT551, UT750
Supported Operating Systems
  • Windows XP (Home Edition/Professional (32-bit version)
  • Windows Vista Business (with Service Pack 1) (32-bit version)
  • Windows 7 Professional (32-bit/64-bit versions)
Upgrade Procedure
Uninstall the old version LL100
  1. Uninstall the old version of LL100, if you have installed it before. Use the following procedure to uninstall the old version of the software.
  2. In the Windows Control panel, double-click the Add or Remove Programs icon to uninstall the LL100 software program.
Install the latest version LL100
  1. Decompress the downloaded file, then double-click setup.exe to begin the installation.
    For details on the installation procedure, see the LL100 PC-based Parameters Setting Tool User's Manual.
  2. To verify the installation, click [All Programs] - [Green Series] from the Start menu of Windows. [Green Series LL100] are registered.
Note
If you install the latest version on a PC with Windows Vista/Windows 7, a USB driver is also required to install. Please download the USB driver above, and install.
Please read the user's manual for the installation.
* Software Agreement
  • The property rights, proprietary rights, intellectual property rights, and all other rights associated with the software are held by Yokogawa Electric Corporation.
  • Under no circumstances is any dumping, reverse compiling, reverse assembly, reverse engineering, or any other kind of alteration or revision of this software allowed.
  • This software is offered free of charge, but no unlimited warranties are made against any defects whatsoever.
  • Also, Yokogawa may not be able to accept inquiries regarding repair of defects in or questions about this software.
  • The contents of this software are subject to change without prior notice as a result of continuing improvements to the software's performance and functions.
  • Yokogawa bears no liability for any problems that may occur during download or installation of this software.
  • Use of the Yokogawa Web site is at the user's own risk.
  • Any parties contributing to the creation or distribution of the contents on the Yokogawa Web site shall bear no responsibility whatsoever for any damages occurring as a result of the use of said contents.

Downloading of the software indicates acceptance of the software agreement.

Related Products & Solutions


Top