How can I display the settings of DX100P/DX200P, DX1000/DX2000 (/AS1 model) files opened in the SMARTDAC+ STANDARD Universal Viewer?

Install DAQSTANDARD (model DXA120, 1 license comes standard with the DX1000/DX2000) in the same folder as the SMARTDAC+ STANDARD Universal Viewer. When you install DAQSTANDARD, select “Custom” for the Setup type, and change the installation destination folder to the SMARTDAC+ STANDARD Universal Viewer folder.

The default installation folder for the SMARTDAC+ STANDARD Universal Viewer is the following:
[System Drive]:\Program Files\Yokogawa Electric Corporation\SMARTDAC+ STANDARD Universal Viewer\

However, if installing the 32-bit version on a 64-bit system, it is the following:
[System Drive]:\Program Files (x86)\Yokogawa Electric Corporation\SMARTDAC+ STANDARD Universal Viewer\

Prodotti e Soluzioni Correlati

  • Button Operated DX1000/DX2000

    The Daqstation DX1000/2000 series is a data acquisition system with display. Its HMI supports custom graphics for industry applications, audit trail and advanced security conforming to FDA 21CFR Part 11.

    Vedi di più
  • Touch Screen GP10/GP20

    The SMARTDAC+TM GP10/GP20 is a portable paperless recorder with a modular architecture on the back panel and has a data logging function to acquire the required data. By supporting not only I/O but also many communication protocols, you can connect to various devices. GP utilizes AI. Supporting FDA 21 CFR Part11 and AMS2750E/NADCAP.

    Vedi di più
  • Touch Screen Paperless Recorder GX10/GX20

    The SMARTDAC+TM GX10/GX20 is a panel mount paperless recorder with a modular architecture on the back panel and has a data logging function to acquire the required data. By supporting not only I/O but also many communication protocols, you can connect to various devices. GX utilizes AI. Supporting FDA 21 CFR Part11 and AMS2750E/NADCAP.

    Vedi di più

Top