Install DAQSTANDARD (model DXA120, 1 license comes standard with the DX1000/DX2000) in the same folder as the SMARTDAC+ STANDARD Universal Viewer. When you install DAQSTANDARD, select “Custom” for the Setup type, and change the installation destination folder to the SMARTDAC+ STANDARD Universal Viewer folder.
The default installation folder for the SMARTDAC+ STANDARD Universal Viewer is the following:
[System Drive]:\Program Files\Yokogawa Electric Corporation\SMARTDAC+ STANDARD Universal Viewer\
However, if installing the 32-bit version on a 64-bit system, it is the following:
[System Drive]:\Program Files (x86)\Yokogawa Electric Corporation\SMARTDAC+ STANDARD Universal Viewer\
Súvisiace produkty a riešenia
-
Button Operated DX1000/DX2000
The Daqstation DX1000/2000 series is a data acquisition system with display. Its HMI supports custom graphics for industry applications, audit trail and advanced security conforming to FDA 21CFR Part 11.
-
DX100P/DX200P Paperless Recorder
Model Names: DX100P and DX200P
-
Touch Screen GP10/GP20
The SMARTDAC+TM GP10/GP20 is a portable paperless recorder with a modular architecture on the back panel and has a data logging function to acquire the required data. By supporting not only I/O but also many communication protocols, you can connect to various devices. GP utilizes AI. Supporting FDA 21 CFR Part11 and AMS2750E/NADCAP.
-
Touch Screen Paperless Recorder GX10/GX20
The SMARTDAC+TM GX10/GX20 is a panel mount paperless recorder with a modular architecture on the back panel and has a data logging function to acquire the required data. By supporting not only I/O but also many communication protocols, you can connect to various devices. GX utilizes AI. Supporting FDA 21 CFR Part11 and AMS2750E/NADCAP.